Abstract:During the walking process of lower limb exoskeleton rehabilitation robots, inevitable collision impacts will occur when the swinging leg lands on the ground. The impact reaction force from the ground will induce vibrations in the entire robot's body from bottom to top. To address this phenomenon, considering the limitations of traditional active compliance and passive compliance methods, a variable stiffness and damping actuator (VSDA) leg structure using a magnetorheological damper (MRD) is proposed. Firstly, experimental methods are used to obtain the ground reaction force (GRF) exerted on a normal person during walking. Then, a mathematical model of the VSDA leg structure is constructed, and its working principle is analyzed. Based on human mass and dimensions, a 3D model is designed and selected. Finally, a simulation model is built in the MATLAB/Simulink environment using the fuzzy switch damping control strategy to simulate the acceleration and displacement of the human body under sinusoidal and random excitations. The results indicate that under sinusoidal excitation, employing fuzzy switch damping control optimizes human displacement by 72.47% compared to the high stiffness and high damping system, and by 16.95% compared to the switch damping system. Human acceleration is optimized by 52.09% compared to the high stiffness and high damping system, and by 25.2% compared to the switch damping system. Under random excitation, adopting fuzzy switch damping control optimizes human displacement by 59.09% compared to the high stiffness and high damping system, and by 21.74% compared to the switch damping system. Human acceleration is optimized by 78.74% compared to the high stiffness and high damping system, and by 31.66% compared to the switch damping system. This validates the VSDA design structure and control method, demonstrating certain advantages in improving the compliance and stability of lower limb exoskeleton rehabilitation robots.

A Design of the Aid Walking Mechanism for Legs Rehabilitation and Dynamics Analysis

Three-Dimensional Human Modeling and Dynamics Simulation Based on ADAMS

Dynamics Analysis and Simulation of a New 6-DOF Lower Limb Rehabilitation Robot

Design and Analysis of a Multi-Joint Lower Limbs Rehabilitation Robot

Mechanical Structure and Control Methods for Lower-Limb Rehabilitation Robots

Design & Analysis of the Mechanical System for a Spacial 4-DOF Series-parallel Hybrid Lower Limb Rehabilitation Robot

Kinematics Simulation Analysis of a Kind of Pedal Rehabilitation Robot

Designing Synergistic Walking of a Humanoid Single Leg Driven by Pneumatic Artificial Muscles: an Empirical Study

Structural Design and Experimental Analysis of the Self-Balancing Lower Limb Exoskeleton Robot

Research of a New Rehabilitation and Assisting Robot

Study On Structural Modeling And Kinematics Analysis Of A Novel Wheel-Legged Rescue Robot

A 4-DOF Workspace Lower Limb Rehabilitation Robot: Mechanism Design, Human Joint Analysis and Trajectory Planning

Dynamic analysis and design of a multipurpose lower limb exoskeleton for rehabilitation

Design, kinematics, simulation, and experiment for a lower-limb rehabilitation robot

Design and analysis of a lower limb assistive exoskeleton robot

Analysis, Design, and Experimental Research of a Novel Wheelchair-Stretcher Assistive Robot

Design and control of a sit-to-stand assistive device based on analysis of kinematics and dynamics

Analysis and optimization design of motion characteristics for a 3- P UU/ R parallel ankle joint rehabilitation mechanism

Design and Kinematics of a Lower Limb Rehabilitation Robot

Design, Analysis, and Experiment for Rescue Robot with Wheel-Legged Structure

Research on Mechanical Leg Structure Design and Control System of Lower Limb Exoskeleton Rehabilitation Robot Based on Magnetorheological Variable Stiffness and Damping Actuator