Abstract:Dye treatments in industrial wastewaters causes numerous obstacles while stains exist normally constant to radiance as well as corrosion and thus, aerobic digestion. The removal of Congo red dye in low concentration from acidic aqueous solution is the main objective of present work. Synthesis of Acrylamide (AM), Diallyl Dimethyl Ammonium Chloride Propylene (DADMAC) and Acryloyloxyethyltrimethyl ammonium chloride (DAC) (PADD) were carried by UV-initiated polymerization, and polyacrylamide (PAM) as contrast sample. Several analytical techniques existed employed to characterization and demonstrate the productive synthesize of PADD, characteristics and composition of the flocculants was studied through FTIR, 1HNMR while thermal stability of PADD in addition PAM was studied by TGA. In addition, the strong structure of surface morphology was confirmed by scanning electronic microscopy (SEM). Established effective process was used to evaluate the flocculation behaviour with special characteristics. Measuring the parameters, dosage of flocculants, flocculation time, temperature, flocculants initial concentration of Congo red dye, stirring speed and zeta potential in removal of Congo red efficiently in acid aqueous environment. These factors presented that in the condition of strong acidity, low concentration and charge neutralization, the adsorption and bridging effect of PADD on Congo red dye was dominant. Under the idyllic conditions concentration of dye 3.0 mg L−1 and pH 6.0, the maximum removal rates of Congo red dye have been 96.45% and 81.10%, PADD and PAM, respectively. PADD provides a scientific basis platform for the removal of Congo red dye efficiently.

Synthesis of Lignin-Base Cationic Flocculant and Its Application in Removing Anionic Azo-Dyes from Simulated Wastewater

Synthesis and Flocculation Performance of Lignin-based Cationic Flocculants

Study on the preparation of amploteric lignin-based flocculant and its flocculation and decolorizing properties

Characterization and performance of a novel lignin-based flocculant for the treatment of dye wastewater

Preparation of an Amphoteric Lignin Flocculant and Its Decolorization Performance Research

Evaluation of Molecular Weight, Chain Architectures and Charge Densities of Various Lignin-Based Flocculants for Dye Wastewater Treatment

One-pot preparation of lignin-based cationic flocculant and its application in dye wastewater

Preparation and Performance of Dimethyl-Acetoxy- (2-Carboxymethyl Ether)-Lignin Ammonium Chloride Amphoteric Surfactant

Flocculation Performance of Lignin-Based Flocculant During Reactive Blue Dye Removal: Comparison with Commercial Flocculants

Synthesis, characterization of a novel lignin-based polymer and its behavior as a coagulant aid in coagulation/ultrafiltration hybrid process

Study on the Discoloration of Simulating Dye Effluemts with a Kind of Amphoteric Lignin-based Flocculant

Preparation of Amphoteric Lignin-base Flocculant LSDC

Preparation and flocculation performance of dimethylallyl quaternary ammonium salts of lignin

Optimization of lignosulfonate modified flocculants by response surface methodology

Preparation of a Lignin-Based Cationic Flocculant and Its Application in Kaolin Suspension Treatment

The synthesis and absorption dynamics of a lignin-based hydrogel for remediation of cationic dye-contaminated effluent

Enhanced performance of a novel flocculant containing rich fluorine groups in refractory dyeing wastewater treatment: Removal mechanisms

Synthesis, Characterization, and Utilization of a Lignin-Based Adsorbent for Effective Removal of Azo Dye from Aqueous Solution

Synthesis, Characterization and Floculating Properties of Coply(AM-DAC) in Water and Wastewater Treatment

Synthesis and Characterization of a Novel Cationic Polyacrylamide-Based Flocculants to Remove Congo Red Efficiently in Acid Aqueous Environment

Synthesis and Flocculation Performance of a New Quaternary Ammonium Salt of Lignin