Abstract:The settlement of any position of the municipal solid waste (MSW) body during the landfilling process and after its closure has effects on the integrity of the internal structure and storage capacity of the landfill. This paper proposes a practical approach for calculating the settlement and storage capacity of landfills based on the space and time discretization of the landfilling process. The MSW body in the landfill was divided into independent column units, and the filling process of each column unit was determined by a simplified complete landfilling process. The settlement of a position in the landfill was calculated with the compression of each MSW layer in every column unit. Then, the simultaneous settlement of all the column units was integrated to obtain the settlement of the landfill and storage capacity of all the column units; this allowed to obtain the storage capacity of the landfill based on the layer-wise summation method. When the compression of each MSW layer was calculated, the effects of the fluctuation of the main leachate level and variation in the unit weight of the MSW on the overburdened effective stress were taken into consideration by introducing the main leachate level's proportion and the unit weight and buried depth curve. This approach is especially significant for MSW with a high kitchen waste content and landfills in developing countries. The stress-biodegradation compression model was used to calculate the compression of each MSW layer. A software program, Settlement and Storage Capacity Calculation System for Landfills, was developed by integrating the space and time discretization of the landfilling process and the settlement and storage capacity algorithms. The landfilling process of the phase IV of Shanghai Laogang Landfill was simulated using this software. The maximum geometric volume of the landfill error between the calculated and measured values is only 2.02%, and the accumulated filling weight error between the calculated value and measured value is less than 5%. These results show that this approach is practical for satisfactorily and reliably calculating the settlement and storage capacity. In addition, the development of the elevation lines in the landfill sections created with the software demonstrates that the optimization of the design of the structures should be based on the settlement of the landfill. Since this practical approach can reasonably calculate the storage capacity of landfills and efficiently provide the development of the settlement of each landfilling stage, it can be used for the optimizations of landfilling schemes and structural designs.

Field Monitoring And Analysis Of Municipal Solid Waste Landfill Settlement

Monitoring of Landfill Settlement by Means of Horizontal Inclinometers

Back-Analyses of Landfill Instability Induced by High Water Level: Case Study of Shenzhen Landfill

Field Monitoring Of A Geogrid Reinforced Msw Slope

Effects of Moisture Content and Landfill Age on the Shear Strength Properties of Municipal Solid Waste in Xi'an, China.

Stability and Safety Evaluation of One Solid Waste Landfill Site and Its Treatment Measures

Vertical Expansion Stability of an Existing Landfill: A Case Study of a Landfill in Xi’an, China

Slope stability associated with expansion of MSW landfill in China

Study on Compressibility and Settlement of a Landfill with Aged Municipal Solid Waste: A Case Study in Taizhou

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Sustainable Landfill Technologies For Municipal Solid Wastes In China

Analysis and Control of Leachate Quantity and Level in MSW Landfills

A review on settlement models of municipal solid waste landfills

Investigation of Methane Fluxes from Temporary Cover of Xi’an Jiangcungou Landfill, China

Landfill Density of Municipal Domestic Waste and Its Distribution along Depth

Analyses on a high leachate mound in a landfill of municipal solid waste in China

PORE PRESSURE MONITORING AND SLOPE STABILITY ANALYSIS OF A WASTE LANDFILL

MONITORING AND BACK ANALYSES OF SLOPE FAILURE PROCESS AT A LANDFILL

A Practical Approach for Calculating the Settlement and Storage Capacity of Landfills Based on the Space and Time Discretization of the Landfilling Process

Aging and compressibility of municipal solid wastes

Field Behaviors of a Geogrid Reinforced MSW Slope in a High-Food-waste-content MSW Landfill: A Case Study