Abstract:Dicyclopentadiene (DCPD) resins are manufactured commercially using Reaction Injection Molding (RIM) process. DCPD has valuable properties with good impact resistance, low temperature resistance and water-resisting. In particular the impact properties are much better than epoxy resins. The application of DCPD resins includes forklift, fork crane, dump truck and heavy vehicles. The manufacturing time need to be reduced and the mechanical properties of DCPD resin also can be improved by adding reinforcement materials. In this work, compression molding method was used to improve mechanical properties of DCPD. The optimum curing conditions of DCPD were investigated with pressure, temperature, and stirring time and speed in the curing conditions. In addition, the mechanical property of DPCD was improved by adding reinforcement such as carbon fiber and glass fiber. After mechanical measurement at different conditions, the optimum curing condition of DCPD resin was obtained as 80 similar to 100 C in temperature, 15 psi in pressure, 200 rpm in stirring speed and 70 seconds in stirring time. After adding reinforcement materials such as chop carbon and glass fiber, the DCPD composites exhibited even worse mechanical properties. Surface treatment of reinforcing fibers and modification of DCPD catalysts should be studied continuously.

Progress in research on preparation of pyromellitic dianhydride

Efficient,continuous Oxidation of Durene to Pyromellitic Dianhydride Mediated by a V-Ti-P Ternary Catalyst:The Remarkable Doping Effect

A new synthetic method Ni-MoZrO2-catalyzed oxidation for the preparation of pyromellitic dianhydride

Improved Interfacial Adhesion And Manufaturing Method Of Mgf/P-Dcpd Composites Using W, Mo, Or Ru Type Catalysts In Air Condition

Preparation of Nickel-Foam-supported Pd/NiO Monolithic Catalyst and Construction of Novel Electric Heating Reactor for Catalytic Combustion of VOCs

Advanced design and development of catalysts in propane dehydrogenation

Progress in Research of Catalysts for Oxidative Carbonylation of Methanol to Dimethyl Carbonate

Clean Technology for Synthesizing Diphenylmethane Diisocyanate

Anti-Coking and Anti-Sintering Ni/Al2O3 Catalysts in the Dry Reforming of Methane: Recent Progress and Prospects

Research Progress on Propylene Preparation by Propane Dehydrogenation

Catalytic materials for direct synthesis of dimethyl carbonate (DMC) from CO2

Preparation of supported palladium catalyst from hydrotalcite-like compound for dicyclopentadiene resin hydrogenation

A preparation process of ceria based monolithic catalysts for automobile exhaust

Recent Progress in Metal-Molecular Sieve Catalysts for Propane Dehydrogenation

Advances in the Catalysts for Synthesis of Dimethyl Carbonate (DMC) Via Liquid-Phase Oxidative Carbonylation of Methanol

Recent advances during CH4 dry reforming for syngas production: A mini review

Research Progress in the Synthesis of CL‐20 and the Application of Catalysts in the Synthesis

Preparation of Supported Skeletal Ni Catalyst and Its Catalytic Performance on Dicyclopentadiene Hydrogenation

Effective Synthesis of -Xylylene Dicarbamate via Carbonylation of -Xylylene Diamine with Ethyl Carbamate over Hierarchical TS-1 Catalysts.

Recent progress on catalysts for propane dehydrogenation in presence of CO2

Recent progress on the traditional and emerging catalysts for propane dehydrogenation