Abstract:Laminar methane diffusion flames doped by vapors of different blends of n-heptane and iso-octane burning in a coflow of air diluted with CO2 were simulated numerically in this study. These laminar coflow diffusion flames have been experimentally investigated recently by Kashif et al. (2014). Numerical simulations were performed using a detailed reaction model containing 175 species and 1189 reactions together with a sectional soot model. The soot model consists of inception as a result of the collision of two pyrene molecules, heterogeneous surface growth and oxidation following the hydrogen abstraction acetylene addition (HACA) mechanism, soot particle coagulation, and PAH surface condensation. The numerical model provides prediction in fairly good quantitative agreement with the experimental data and reproduces successfully the influence of the fuel blend composition and CO2 dilution of air on the flame structure and soot production. The soot production increases and decreases linearly with the molar concentration of iso-octane in the fuel stream and CO2 content of the air stream, respectively. In addition, the efficiency of CO2 dilution to suppress soot is reduced as the concentration of iso-octane increases. This is likely due to the greater contributions of PAH condensation with increasing iso-octane concentration relative to soot surface growth through HACA. The increase in soot production with the molar concentration of iso-octane results primarily from an increase in the concentration of propargyl radical. The self-reaction of propargyl then produces higher concentrations of benzene and pyrene, leading to higher nucleation rates and consequently an increase the soot surface area. The higher surface area then results in higher surface growth and condensation rates. The enhanced pyrene concentration is another factor to prompt soot surface condensation. An analysis of the reaction rates shows that propargyl radicals are mainly produced from propylene. The decomposition and oxidation of iso-octane was found much more efficient to produce propylene than that of n-heptane.

Deposit morphology on SiC fibers in methane-acetylene/air laminar diffusion flames

Effect of Oxygen Concentration on Soot Morphology in C2H4 Diffusion Flame

Effects of ethanol and 2, 5-dimethylfuran addition on the morphology and nanostructure evolution of soot in gasoline primary reference fuel-air coflow diffusion flames

The Evolution of Soot Morphology and Nanostructure in Laminar Diffusion Flame of Surrogate Fuels for Diesel

Comparative Study on Nascent Soot Formation Characteristics in Laminar Premixed Acetylene, Ethylene, and Ethane Flames

Morphology and Fractal Dimension of Size-Resolved Soot Particles Emitted from Combustion Sources

Experiments and numerical simulation on soot formation in opposed-jet ethylene diffusion flames

Effects of Fuel Types on Soot Evolution in Diffusion Flames

Effects of Fuel Structure on Structural Characteristics of Soot Aggregates

Formation of soot particles in methane and ethylene combustion: A reactive molecular dynamics study

Relevance of soot formation characteristics to equivalence ratio and CO2 addition of acetylene flame

Evolution of physicochemical characteristics of soot in a single coal combustion flame

Brownian dynamics simulation of soot primary particle aggregation in laminar ethylene diffusion flames

The effect of support fibers on micro-convection in droplet combustion experiments

Combustion synthesis of SiC/Al2O3 composite powders with SiC nanowires and their growth mechanism

Effects of Ferrocene Addition on Soot Formation Characteristics in Laminar Premixed Burner-Stabilized Stagnation Ethylene Flames

Experimental and simulation studies on flame characteristics and soot formation of C2H2 jet flames

Numerical Study of Soot Formation in Laminar Coflow Diffusion Flames of Methane Doped with Primary Reference Fuels

On the Effective Density of Soot Particles in Premixed Ethylene Flames

Study of soot microscopic characteristics in hydrogen/methane/ethylene co-flow diffusion flame

Soot particles analysis in laminar premixed propane/oxygen (C3H8/O2) flames using published measurement data