Abstract:The mechanical properties of the aluminum matrix composite directly affect its application in aerospace, transportation, and other industries. In this study, the effect of TiB 2 particles on the comprehensive properties which includes microstructure, thermal deformation behavior, tensile properties, fracture morphology and hardness of Al-Zn-Mg-Cu alloy was analyzed. Furthermore, the microstructures of these alloys were analyzed using energy-dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and a metallography microscope. The stress–strain curves and dynamic softening of the two alloys were studied using the thermal compression test. Furthermore, a thermal processing diagram was constructed for comparing the safety and instability processing zones of the alloys. The Vickers hardness test and the tensile test were performed to compare their hardness, tensile properties, and fracture morphologies. The results demonstrated that TiB 2 was contributing to the refinement of the grain size. When the deformation temperature and the stress–strain rate were 300–450 °C and 0.01–10 s −1 , the alloy exhibited the same stress-strain variation trend during the thermal compression process before and after adding TiB 2 particles. But the deformation resistance of the alloy was improved and processing instability zones were reduced from 300–320 °C/2.5–10 s −1 and 430–450 °C/0.2–0.5 s −1 to 420–450 °C/0.2–1 s −1 because of the addition of TiB 2 particles. TiB 2 particles could also increase the hardness of the alloy by 71.96% and improve the plastic properties and the fracture stress compared with before adding.

Effect of Fe3O4 particles on thermal expansion behavior of Al18B4O33 whisker reinforced aluminum composite

Influence of particulate B4C with high weight fraction on microstructure and mechanical behavior of an Al-based metal matrix composite

Effect of MgO particles with in-situ graphene coating on mechanical and thermal expansion properties of aluminum matrix composites

Microstructure and Mechanical Properties of Al–B 4 C Composite at Elevated Temperature Strengthened with in Situ Al 2 O 3 Network

Synergistic reinforcement effect of Fe and in-situ synthesized MgAlB4 whiskers in Al matrix composites

Effect of ZrMgMo3O12 content on the thermal expansion and dimensional stability of ZrMgMo3O12p/2024Al composites

Influence of Fe Powders Replacing Cu Powders on the Thermal and Mechanical Properties of Aluminate Cementitious Thermal Energy Storage Materials at High Temperature

Microstructure and mechanical properties of Al2O 3/TiAl in situ composites doped with Fe2O3

Microstructure and Mechanical Properties of Al/Al4C3/Al2O3 Composite

Influence of alumina whisker or nano-carbon contents on the microstructure and mechanical properties of CuZrTiAlNi refractory high entropy alloy composites

Effect of Ti Content and Stirring Time on Microstructure and Mechanical Behavior of Al-B4C Composites

Exploring the size effects of Al4C3 on the mechanical properties and thermal behaviors of Al-based composites reinforced by SiC and carbon nanotubes

Magnetic, Electrical, and Physical Properties Evolution in Fe3O4 Nanofiller Reinforced Aluminium Matrix Composite Produced by Powder Metallurgy Method

Microstructure and property evolution of aluminium/potassium titanate whiskers composite during Rheo-casting

Calculation of thermal expansion coefficient of Fe/sub 3/Al with the addition of transition metal elements

Effect of particle size and volume fraction on the strengthening mechanisms of boron carbide reinforced aluminum metal matrix composites

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

Thermophysical properties of Cu-coated carbon fibers reinforced aluminum matrix composites by stir casting

Effect of Al2O3 on Sintering Reaction of Calcium Ferrite

Effect of interfacial Fe3O4 nanoparticles on the microstructure and mechanical properties of textured alumina densified by ultrafast high-temperature sintering

Research on Microstructure and Mechanical Properties of B<sub>4</sub>C/Al Composites by Liquid Mental Mixing