Abstract:The dynamic characteristics of fruits are correlated with their mechanical and structural properties. A finite element (FE) harmonic response analysis was used to investigate the dynamic characteristics of pears. First, the pear dynamic characteristics were measured by the acoustic vibration method using a laser Doppler vibrometer (LDV). A sample pear was placed vertically on the vibration stage and excited with a sweeping sine wave signal. The LDV was used to measure the response signal from the top of the pear. A three-dimensional model of the pear was then established by a machine vision-based modeling system. In the FE model, a force excitation was applied to the pear model from the bottom of the pear, and the vertical displacement at the top of the pear model was calculated. The resonance frequencies were extracted from the frequency response curve, and then the corresponding mode shapes were obtained. The results showed that the resonance frequencies of the FE models agreed well with the measured frequencies, indicating that harmonic response analysis is feasible for investigating the pear dynamic characteristics. All of the mode shapes showed a large deformation in the longitudinal direction. Therefore, it would be better to measure these modes from the top of the pear by the LDV method when the pear is placed vertically on the vibration stage. In addition, the effects of material properties and fruit shape on pear dynamic characteristics were investigated. The resonance frequencies increased with increasing Young's modulus and decreased with increasing Poisson's ratio, density, and mass. It was also found that there were strong linear relationships between the resonance frequencies and height/diameter (h/d) ratio. The obtained results could provide guidance for pear texture evaluation by the LDV method.

Mechanical Properties of Pear As A Function of Location and Orientation

Dynamic Characteristics of Intact Pear

Mechanical properties of crisp pear peel and flesh as affect by storage temperature

Mechanical properties analysis of architectural PVDF/PES fabrics with uni-tensile and bi-axial test

Anisotropic Relaxation Properties of Pear

Variations in firmness and sugar content in 'Huanghua' pear (Pyrus pyrifolia 'Nakai')

Evaluation Of Pear Firmness By Dynamic Characterictics Of Drop Impact

Studies on Vibration Characteristics of a Pear Using Finite Element Method

Firmness Measurement of Peach by Impact Force Response

Pear dynamic characteristics and firmness detection

The Steady-state Sinusoidal Dynamic Behaviour of Peach and Pear

Investigation of fatigue mechanical properties of apolycrystalline solid at mesoscopic scale using depth-sensing indentation (DSI) technique

Research of dynamic equilibrium of pear

Experimental study on distributed difference of anisotropic firmness and sugar content of peach

Compressive Mechanical Properties of Larch Wood in Different Grain Orientations

Analysis of Pear Dynamic Characteristics Based on Harmonic Response

Firmness Evaluation by Drop Impact Characteristics for Peach

Acoustic Testing for Peach Fruit Ripeness Evaluation During Peach Storage Stage

Firmness and sugar content of Shangfen peach

MECHANICAL MODEL OF CERASUS HUMILIS ESTABLISHED BY UNIAXIAL COMPRESSION PHYSICAL TEST AND VIRTUAL SIMULATION

Physical Properties, Sensory Attributes, and Consumer Preference of Pear Fruit Leather