5.4 A 22.4-to-30.7ghz Phased-Array Receiver with Beam-Pattern Null-Steering and Beam-Tracking Techniques Achieving >30.2db OTA-Tested Spatial Rejection
Yiming Yu,Bohan Sun,Mengqian Geng,Chenxi Zhao,Huihua Liu,Yunqiu Wu,Jingzhi Zhang,Kai Kang
DOI: https://doi.org/10.1109/isscc49657.2024.10454530
2024-01-01
Abstract:Mm-wave phased-array receivers (RXs) operating in complicated electromagnetic environments often suffer from spatially diversified interference, which leads to saturation and non-linear distortion in the RXs. One commonly used approach to mitigate this issue is the application of sidelobe suppression methods using window functions [1, 2], which comes with a drawback of array gain reduction. Alternatively, spatial notch filters are proposed, which can generate a spatial notch to undesired in-band blockers. This can be achieved at baseband and intermediate frequency (IF) stages where the blocker received in each channel is amplified, downconverted, and processed [3, 4]. However, the blocker handling capability is limited by the linearity of the downconversion mixers and subsequent IF circuits, thereby a power-hungry, highly linear mixer is in demand. Another approach is to suppress the blocker in RF chains, but this approach imposes limitations on the scalability of phased-array RXs since each element requires an individual spatial notch filter and a symmetrical layout [5]. In this work, we demonstrate a beam-pattern null-steering (BPNS) technique for mm-wave phased-array RXs, which (1) suppresses in-band blockers before the mixer, (2) eliminates the need for lossy attenuators or power-hungry variable-gain amplifiers (VGAs) in each RF channel, and (3) supports higher scalability. Also, a beam-tracking (BT) method is developed to timely detect the incident angles of blockers, as well as that of the desired signal.