Abstract:One of the structural elements used in the construction of insulating glass units (IGUs) are tight gaps filled with gas, the purpose of which is to improve the thermal properties of glazing in buildings. Natural changes in weather parameters: atmospheric pressure, temperature, and wind influence the gas pressure changes in the gaps and, consequently, the resultant loads and deflections of the component glass panes of a unit. In low temperature conditions and when the atmospheric pressure increases, the component glass panes may have a concave form of deflection, so that the thickness of the gaps in such loaded glazing may be less than its nominal thickness. The paper analyses the effect of reducing this thickness in winter conditions on the design heat loss through insulating glass units. For this purpose, deflections of glass in sample units were determined and on this basis the thickness of the gaps under operating conditions was estimated. Next, the thermal transmittance and density of heat-flow rate determined for gaps of nominal thickness and of thickness reduced under load were compared. It was shown that taking into account the influence of climatic loads may, under certain conditions, result in an increase in the calculated heat loss through IGUs. This happens when the gaps do not transfer heat by convection, i.e., in a linear range of changes in thermal transmittance. For example, for currently manufactured triple-glazed IGUs in conditions of "mild winter", the calculated heat losses can increase to 5%, and for double-glazed IGUs with 10-14 mm gaps this ratio is about 4.6%. In other cases-e.g., large thickness of the gaps in a unit, large reduction in outside temperature-convention appears in the gaps. Then reducing the thickness of the gaps does not worsen the thermal insulation of the glazing. This effect should be taken into account when designing IGUs. It was also found that the wind load does not significantly affect the thickness of the gaps.

A Study on the Optimal Gas Gap for Low-E Double Glazing Glass Units

Calculation and Analysis of U Value for Low-E Glass Units

Optimum Design and Energy Performance of Hybrid Triple Glazing System with Vacuum and Carbon Dioxide Filled Gap

Heat Transfer Through Insulating Glass Units Subjected to Climatic Loads

A data-driven approach to thermal transmittance (U-factor) calculation of double-glazed windows with or without inert gases between the panes

Study of the relationship between common and Low-E double glazing glass fenestrations and indoor thermal and daylight environments

Ventilation performance of a naturally ventilated double skin façade with low-e glazing

Development of Low-E Energy-Saving Glass

Heat Transfer through Double-Chamber Glass Unit with Low-Emission Coating

Simulation of the Spectra and Determination of the Optical Constants of Online Low-Emission Glass from Visible to Mid-Infrared Region

The Pressure Distribution of Insulating Glass Unites under Thermal Gradient

Analysis On The Temperturature Fields And Thermal Stresses Of Laminated Glass Unit Of Glass Curtain Wall

Thermal Response of Low-E and Float Glass Facades under Various Heating Rates

THE PHYSICAL PROPERTIES MEASUREMENT AND APPLICATION OF ENERGY-SAVING GLASS

Numerical Study on Fire Response of Glass Facades in Different Installation Forms

Study on the influence of key parameters of exterior window structure on building energy saving effect

The Effect of Energy Saving and Emission Reduction of Semi-External Window Installation

Thermal performance and condensation risk of single-pane glazing with low emissivity coatings

Analysis on the Temperature Fields and Thermal Stresses of Laminated Glass Unit of Point-Supported Glass Curtain Wall

Determination of optical constants of functional layer of online Low-E glass based on the Drude theory

PRINCIPLES OF LOW-E WINDOWS AND THEIR ENERGY-SAVING EFFECT