Abstract:Metal artifacts are considered a major challenge in computed tomography (CT) as these adversely affect the diagnosis and treatment of patients. Several approaches have been developed to address this problem. The present study explored the clinical potential of a novel photon-counting detector (PCD) CT system in reducing metal artifacts in head CT scans. In particular, we studied the recovery of an oral tumor region located under metal artifacts after correction. Three energy thresholds were used to group data into three bins (bin 1: low-energy, bin 2: middle-energy, and bin 3: high-energy) in the prototype PCD CT system. Three types of physical phantoms were scanned on the prototype PCD CT system. First, we assessed the accuracy of iodine quantification using iodine phantoms at varying concentrations. Second, we evaluated the performance of material decomposition (MD) and virtual monochromatic images (VMIs) using a multi-energy CT phantom. Third, we designed an ATOM phantom with metal insertions to verify the effect of the proposed metal artifact reduction. In particular, we placed an insertion-mimicking an iodine-enhanced oral tumor in the beam path of metallic objects. Normalized metal artifact reduction (NMAR) was performed for each energy bin image, followed by an image-based MD and VMI reconstruction. Image quality was analyzed quantitatively by contrast-to-noise ratio (CNR) measurements. The results of iodine quantification showed a good match between the true and measured iodine concentrations. Furthermore, as expected, the contrast between iodine and the surrounding material was higher in bin 1 image than in bin 3 image. On the other hand, the bin 3 image of the ATOM phantom showed fewer metal artifacts than the bin 1 image because of the higher photon energy. The result of quantitative assessment demonstrated that the 40-keV VMI (CNR: 20.6 ± 1.2) with NMAR and MD remarkably increased the contrast of the iodine-enhanced region compared with that of the conventional images (CNR: 10.4 ± 0.5) having 30 to 140 keV energy levels. The PCD-based multi-energy CT imaging has immense potential to maximize the contrast of the target tissue and reduce metal artifacts simultaneously. We believe that it would open the door to novel applications for the diagnosis and treatment of several diseases.

A hybrid approach to reducing computed tomography metal artifacts in intracavitary brachytherapy.

Reduction of computed tomography metal artifacts due to the Fletcher-Suit applicator in gynecology patients receiving intracavitary brachytherapy

Metal artifact reduction in cervix brachytherapy with titanium applicators using dual-energy CT through virtual monoenergetic images and an iterative algorithm: A phantom study

A Method Based on Interpolation for Metal Artifacts Reduction in Ct Images

An adaptive scaling hybrid algorithm for reduction of CT artifacts caused by metal objects]

Metal artifact reduction using iterative CBCT reconstruction algorithm for head and neck radiation therapy: A phantom and clinical study

A kV-MV approach to CBCT metal artifact reduction using multi-layer MV-CBCT

A Novel Metal Artifact Reducing Method for Cone-Beam CT Based on Three Approximately Orthogonal Projections

Metal Artifact Reduction in Helical Cone-beam Computed Tomography

Virtual monochromatic imaging with projection-based material decomposition algorithm for metal artifacts reduction in photon-counting detector computed tomography

Metal Artifacts Reduction in Kv-Ct Images with Polymetallic Dentures and Complex Metals Based on MV-CBCT Images in Radiotherapy

A Metal Artifact Reduction Scheme For Accurate Iterative Dual-Energy CT Algorithms

An unsupervised patient-specific metal artifact reduction framework for proton therapy

Metal artifact reduction and tumor detection using photon-counting multi-energy computed tomography

Metal Artifact Reduction in Computed Tomography Based on Prior Interpolation

Evaluation of a Metal Artifact Reduction Algorithm for Image Reconstruction on a Novel CBCT Platform

Hybrid modality dual-energy imaging aggregating complementary advantages of kV-CT and MV-CBCT: concept proposal and clinical validation

Evaluation of a prototype metal artifact reduction algorithm for cone beam CT in patients undergoing radioembolization

Evaluation of image quality of a novel computed tomography metal artifact management technique on an anthropomorphic head and neck phantom

Reduction of Metal Artifact in Single Photon-Counting Computed Tomography by Spectral-Driven Iterative Reconstruction Technique

Two methods for reducing moving metal artifacts in cone-beam CT