Abstract:Roller compacted concrete (RCC) dams own a large number of horizontal construction layers, which can easily lead to weak joints among layers and generate interlayer joints with different scales to reduce the dam bearing capacity. In this study, extended finite element method (XFEM) is used to simulate crack propagation, the finite element description is first taken on the strong discontinuity. Subsequently, the displacement function of the crack-tip in the quadrilateral element and the geometric determination method of the crack-tip strengthening region are established. Afterwards, the discrete form of the governing equation is derived and the XFEM increment discretization method of the cohesive crack with the crack-tip reinforcement is proposed using the virtual node method to represent the discontinuity of the fracture element. These methods are validated through simulating mixed-mode cracking of one-sided notched asymmetric four-point bending beam. Eventually, the proposed methods are applied to RCC gravity dam to study the development rule and propagation path of the interlayer joints, so as to evaluate the effect of different lengths of the interlayer joints on the dam structural performance. The estimated critical values of dam deformation are helpful to prevent the dam failure during long term operation.

Study on the Stress of RCC Gravity Dam with Layered Structure

Study on Temperature-Stress Simulation of RCC Dam During Construction Period

Simplified numerical method in stress analysis of RCC arch dam with layered structure

Application of shear stress mutual equal theory in RCC gravity dam stess calculatioon

Actual simulation stress and structural improvement of RCC gravity dam

Study on RCC-CSG Composite Dam and its Calculation

Research on Evaluation Method of RCC Dam Layer Against Sliding

Study on the Impact of the Change of Interlayer Elastic Modulus on the Interlayer Stresses of RCC Dam

Study of Horizontal Transverse Joint Crevice Depth of RCC Gravity Dams

Stability Study of RCC Dam Layer Using Different FEM Models

Simulating design and new structure of RCC dam

Evaluation Method for Cohesive Crack Propagation in Fragile Locations of RCC Dam Using XFEM

Entire Process Simulation of Temperature and Stress Fields for RCC Dams

Study on Effects of Artificial Short Cracks of Roller Compacted Concrete Gravity Dam(RCCD)

Simulation of temperature and stress fields of Longkaikou RCC Gravity Dam

Study of damage behaviour of Shapai RCC arch dam

Study on Finite Element Analysis of Arch Dam by Deformation Assumptions Based on of Arch-beam Load-distributed Method

Comparative Study on Interface Elements, Thin-Layer Elements, and Contact Analysis Methods in the Analysis of High Concrete-Faced Rockfill Dams

STUDY ON CRACKING AND STABILITY PROBLEMS OF HIGH ARCH DAMS ON COMPLICATED FOUNDATIONS

Three-dimensional FEM Stress Analysis of Bottom Diversion Outlet and Notch Segment of RCC Dam

Simulation stresses of RCC arch dam with transverse joints and biaxial strength criteria