Abstract:One of the most significant limitations of FBG sensors is their dual sensitivity to temperature and strain. Many methods have reported to avoid this problem by using a tapered fiber grating for the strain measurement free from temperature influence. But all of them are based on the measurement of the reflected power from the tapered fiber grating (TFG). In fact, they have abandoned the major advantage that the measured information is encoded in light wavelength instead of light intensity of FBG sensors, and the revolution of these sensors is begin to depend on the light power fluctuation, connection loss and many other elements. All of these would enlarge the cost of the sensing system. On the basis of the theory calculation and experiment, we demonstrate the feasibility to make a temperature-independent strain sensor by measuring the bandwidth of the reflected light from the tapered fiber grating. In this paper, we also present a novel demodulating method based on a scanning FBG. In the experiment, a PZT is used to make the reflected wavelength of FBG scanned from short wavelength to long wavelength to measure the bandwidth of the reflected light from TFG. From the experimental results, it could be seen that the influences of the light power fluctuation and connection loss are eliminated thoroughly. This simple and low-cost sensor approach has a considerable potential, particularly application for strain sensing in the smart structures.

Fiber Bragg Grating Based Wireless Sensor Module with Modulated Radio-Frequency Signal

Novel Fiber Bragg Grating Sensing Scheme Based on Radio-Frequency Signal Measurement

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Intensity-Modulated Fiber Bragg Grating Sensor System Based on Radio-Frequency Signal Measurement

Ameliorated Spatial Division Multiplexing System of FBG Sensors Based on Novel Wavelength Detection and Demodulation Technique

High-Frequency Fiber Bragg Grating Sensing Interrogation System Using Sagnac-Loop-Based Microwave Photonic Filtering

Study of Fiber Grating Displacement Sensor

Fiber Bragg grating sensor interrogation system based on an optoelectronic oscillator loop

Demodulation Of A Fiber Bragg Grating Strain Sensor By A Multi-Wavelength Fiber Laser

Fiber Bragg Grating Sensor With A Simple Demodulation Method

FBG Sensor Interrogation Based on RF Signal Measurement

A Low-Cost Multimode Fiber Bragg Grating Sensor System

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Time Division Multiplexing of FBG Sensor System

Fiber Bragg Grating Sensor with a Simple

Novel RF interrogation of a fiber Bragg grating sensor using bidirectional modulation of a Mach-Zehnder electro-optical modulator

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Demodulation of a Fiber Bragg Grating Sensor System Based on a Linear Cavity Multi-Wavelength Fiber Laser

A Novel Fiber Bragg Grating Sensor Interrogation System Utilizing a Tunable Fabry-Perot Filter

Long-distance Fiber Bragg Grating Sensor System Based on Time Division Multiplexing and Narrow Wavelength Swept Laser

Sensitivity-Tunable FBG Interrogation System Utilizing a Mechanically Induced Long Period Fiber Grating