Abstract:Superconducting cavity is the key equipment of the superconducting accelerator, which provides higher acceleration voltage and higher frequency power per unit length, and saves equipment space. Superconducting cavities need to be gradually cooled from ambient temperature (300 K) to the superconducting temperature (4.2 K or below) during the test and operation. The temperature difference on the cavity must be strictly limited during the cooldown process to prevent excessive thermal stress on the surface of the superconducting cavity. Since this cooldown process for the superconducting cavity is a typical large hysteresis, non-linear process that is difficult to control automatically using decoupled proportion integral derivative (PID) methods directly, a less efficient manual control scheme is normally adopted. In this paper, 3D numerical simulation, 1D pipe and 0D tank model with artificial neural network (ANN) were combined to generate a two-layer surrogate model that can balance computational accuracy and speed, to improve the automation and cooling efficiency of the superconducting cavity cooldown process. In order to achieve automatic control of the cooling procedure for the superconducting cavity, a model predictive control (MPC) approach was also built on the basis of this two-layer surrogate model. According to the results of the experiment test, the improved method could realize a quick and smooth cooldown process of the superconducting cavity, during which the temperature difference on the cavity could satisfy the requirements. Additionally, the improved automatic cooldown method was more adaptable and saved 29 % more time than the original manual control method. The foundation for a more intelligent automated control of future large cryogenic systems or other system with the large hysteresis, non-linear properties, was laid.

Model-predictive-control for an Accelerated Cooling Process

Model Predictive Control Based On Experience Model For The S-Trioxane Concentration Column

The Study of Controlled Cooling Technology and Warping of X65 Heavy Pipeline Plate

Thermo-Mechanical Coupling Computation and Warping Analysis During Controlled-Cooling of X65 Heavy Pipeline-Plate

Studies and Applications of Predictive Functional Control in Temperature Tracking of Chemical Reactors

Adaptive Model Predictive Control Scheme for Partially Internal Thermally Coupled Air Separation Column

Predictive Functional Control of Outlet Temperature in Delayed Coking Furnace

Calculation and comparison between alternate and continuous controlled cooling technology for X65 pipeline steel plate

Model Predictive Control Strategy Based on Prediction Error Feedforward for Superheating Process.

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

Get the design right, the rest is automatic: Towards an adaptive MPC controller

A Multi-Objective Model Predictive Control for Temperature Control in Extrusion Processes

A Nonlinear Model Predictive Control Strategy For Superheater Process In Thermal Power Plant

Automation of superconducting cavity cooldown process using two-layer surrogate model and model predictive control method

Simultaneous stable control of temperature field distribution uniformity and consistency for multi-temperature zone systems

Online Dynamic Control of Secondary Cooling for the Continuous Casting Process

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Investigating the deviation between prediction accuracy metrics and control performance metrics in the context of an ice-based thermal energy storage system

Model predictive control of long Transfer-line cooling process based on Back-Propagation neural network

Dynamic thermal management of proton exchange membrane fuel cell vehicle system using the tube-based model predictive control

Numerical and experimental study of feedforward and feedback control for microchannel cooling system