Abstract:This study investigated the effects of citric acid on the properties of edible tapioca starch films plasticised with glycerol. The study demonstrated that the physicochemical properties of tapioca starch‐based films could be modified by the incorporation of citric acid and used for various food and pharmaceutical packaging applications. Summary This study investigated the effects of citric acid on the properties of edible tapioca starch films plasticised with glycerol. These films were formed using 5% tapioca (w/w of water); 1%, 3%, 5%, 7% and 9% citric acid (w/w of starch); and 2.2% glycerol (w/w of water). Native starch films formed using 5% tapioca and 2.2% glycerol were used as the control. The properties tested included the degree of crosslinking, thermal stability, crystallinity and mechanical properties. These were evaluated using Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR‐FTIR), X‐Ray diffraction (XRD), thermal gravimetric analysis (TGA) and tensile profile analysis (TPA). The FTIR results provided information about the nature of the crosslinking in the films, while TGA showed that increasing the citric acid concentration reduced the physical decomposition temperature of the materials. Films containing 9% citric acid had the highest degree of esterification and crosslinking, while those containing 7% citric acid had the lowest heat‐related weight loss that correlated with the degree of crosslinking. The weight loss among all six samples was the greatest in the temperature range 260 °C–350 °C where a total of 60% weight loss occurred. The XRD results showed that films containing 3% citric acid had the lowest crystallinity while the native starch films had the highest crystallinity. The TPA analyses showed that films containing 5% citric acid had the greatest influence on improving the tensile strength and elastic modulus, while also having the best impact on lowering the elongation. Tensile strength values recorded for films containing 0%, 1%, 3%, 5%, 7% and 9% citric acid were 5.327, 7.813, 8.688, 12.855, 14.549 and 11.614 MPa. Similarly, when citric acid concentration increased from 3% to 5%, the elastic modulus significantly increased from 831.058 to 2255.691 MPa. This study demonstrated that the physicochemical properties of tapioca starch‐based films could be modified by the incorporation of citric acid.

Influence of Citric Acid on the Properties of Glycerol-plasticized dry Starch (DTPS) and DTPS/Poly(lactic acid) Blends

Characterization of Citric Acid/glycerol Co-Plasticized Thermoplastic Starch Prepared by Melt Blending

Improving thermal stability of starches native cross-linked with citric acid as a compatibilizer for thermoplastic starch/polylactic acid blends

In situ compatibilization of thermoplastic starch/polylactic acid blends using citric acid

Preparation of thermoplastic starch with comprehensive performance plasticized by citric acid

The effect of citric acid on the structural properties and cytotoxicity of the polyvinyl alcohol/starch films when molding at high temperature

Effect of Dialdehyde Starch on Cassava Starch/poly(vinyl Alcohol) Blends Fabricated by Melt Mixing Method with Glycerol Plasticized

Effects of Tartaric Acid Contents on Phase Homogeneity, Morphology and Properties of Poly (Butyleneadipate-Co-terephthalate)/thermoplastic Starch Bio-Composities

An Investigation of the Effect of Semi-Acetal Formation on the Properties of Dialdehyde Starch and its Thermoplastic Blend with Glycerol

Construction of Chelation Structure Between Ca2+ and Starch Via Reactive Extrusion for Improving the Performances of Thermoplastic Starch

Preparation and Characteration of PLA/Starch Blends Compatilized by Citric Acid Based Epoxy

The effect of citric acid concentrations on the mechanical, thermal, and structural properties of starch edible films

Preparation and characterization of thermoplastic starches and their blends with poly(lactic acid)

Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films

An Insight into the Multi-Scale Structures and Pasting Behaviors of Starch Following Citric Acid Treatment

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization

Synergistic plasticization and anti-aging effect of hyperbranched poly(1,4-butanediol citrate)/glycerol on corn starch

Effect of different proportions of glycerol and D-mannitol as plasticizer on the properties of extruded corn starch

Effect of Sodium Citrate/polyethylene Glycol on Plasticization and Retrogradation of Maize Starch.

Preparation and characterization of acetylated starch/poly(lactic-acid) blends

Plasticizing and anti-plasticizing effects of polyvinyl alcohol in blend with thermoplastic starch