Abstract:Nanocrystalline barium titanate (BaTiO3, BT) was synthesized hydrothermally at 220°C by reacting barium hydroxide with titanium dioxide. The resulting BT nanopowders were characterized by X‐ray diffraction (XRD), selected area electron diffraction (SAED), Raman spectrum, scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HR‐TEM). The BT nanopowders have a cubic phase as revealed by the XRD and SAED results, whereas the Raman spectrum indicates that tetragonal phase BT exists in the produced nanopowders but is not the dominant phase because of the weak characteristic peak of the tetragonal structure at 305 cm−1. In the SEM and TEM images, many coarse‐faceted cubic nanoparticles and a small amount of spherical particles are observed, indicating a developed bimodal size distribution of the BT powders. The variations of electron diffraction contrast across these particles in the TEM images indicate the presence of high strain in the BT nanoparticles, which is probably caused by the lattice defects like OH− ions and their compensation by cation vacancies. The HR‐TEM image of a BT nanoparticle with a size of 24 nm and a spherical morphology demonstrates a uniform and perfect crystal structure. The surrounding edges of the particle are very smooth and no surface steps are observed. However, a terrace–ledge–kink (TLK) surface structure was frequently observed at the edges of the BT nanoparticles with rough surface morphology, and in most cases the terrace and ledge lie on the {100} planes. The observed TLK surface structure can be well interpreted by the theory of periodic bond chains. Small nucleated and triangular BT islands with three to four atomic layer thickness, and their outside surfaces faceted as (100) and (010) planes, are also observed in these particles. The rarely seen {110} surface in the BT nanoparticles was found to be reconstructed so that the surface was composed of corners bound by {100} minifaces like the triangular small islands. Microstructural defects such as antiphase boundaries were also observed near the edge of a BT nanoparticle, which were formed by the intersection of two crystalline parts with displacement deviation from each other by , as revealed by the HR‐TEM images.

Electronic Structure of Nanograin Barium Titanate Ceramics

First Principle Study on Electronic Structure of Nanocrystalline Batio3 Ceramics

Preparation,Structure and Characterization of Nano-Grained Barium Titanate Ceramics

Processing, Microstructure and Properties of Nanograin Barium Titanate Ceramics by Spark Plasma Sintering

Ferroelectric properties study for nanocgrain barium titanate ceramics

Electronic structure of barium titanate : an abinitio DFT study

Phase Transition and High Dielectric Constant of Bulk Dense Nanograin Barium Titanate Ceramics

Investigation of Ferroelectric Properties on Nanocrystalline Barium Titanate Ceramics

Structural, optical, and electronic properties of barium titanate: experiment characterisation and first-principles study

Colossal Dielectric Performance of Pure Barium Titanate Ceramics Consolidated by Spark Plasma Sintering

Study on microstructure and properties of nanograin ferroelectric ceramics

Atomic-resolution characterization on the structure of strontium doped barium titanate nanoparticles

CRYSTAL STRUCTURE AND FERROELECTRICITY OF NANOCRYSTALLINE BARIUM TITANATE CERAMICS FABRICATED BY THE HIGH PRESSURE SINTERING

Ferroelectricity of Nanocrystalline BaTiO 3 Ceramics by First Principle Calculation

Phase Transitions in Nanocrystalline Barium Titanate Ceramics Prepared by Spark Plasma Sintering

Grain Size Effect on Structures and Dielectric Constants for Nanocrystalline Batio3 Ceramic

Ferroelectric Properties of Nanocrystalline Barium Titanate Ceramics

EFFECT OF POWDER GRAIN SIZE ON THE STRUCTURE AND DIELECTRIC PROPERTIES OF BARIUM TITANATE CERAMICS

Morphology and atomic-scale surface structure of barium titanate nanocrystals formed at hydrothermal conditions

Dielectric Enhancement in Graphene/Barium Titanate Nanocomposites.

Atomic‐Scale Characterization of Barium Titanate Powders Formed by the Hydrothermal Process