Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

A Glow-Discharge Treatment to Immobilize Poly(Ethylene Oxide) Poly(Propylene Oxide) Surfactants for Wettable and Nonfouling Biomaterials

Immobilization of Polyethylene Oxide Surfactants for Non-Fouling Biomaterial Surfaces Using an Argon Glow Discharge Treatment

A new gas discharge process for preparation of non-fouling surfaces on biomaterials

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Immobilization of Functionalized Alkyl-Poly(ethylene Oxide) Surfactants on Poly(ethylene) Surfaces by Means of an Argon Plasma Treatment

Static Secondary Ion Mass Spectrometric Investigation of the Glow-Discharge-Treated Surfaces

Immobilization of Surface-Active Compounds on Polymer Supports Using Glow-Discharge Processes .1. Sodium Dodecyl-Sulfate on Poly(Propylene)

Mechanism of the Immobilization of Surfactants on Polymer Surfaces by Means of an Argon Plasma Treatment: Influence of UV Radiation

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Underwater Superoleophobic Surfaces Prepared from Polymer Zwitterion/Dopamine Composite Coatings

Protein Repellant Silicone Surfaces by Covalent Immobilization of Poly(Ethylene Oxide)

Conformation-dominated Surface Antifouling and Aqueous Lubrication.

Anti-Fouling Surfaces for Extracorporeal Membrane Oxygenation by Surface Grafting of Hydrophilic Sulfoxide Polymers.

Dielectric and Mechanical Investigations on the Hydrophilicity and Hydrophobicity of Polyethylene Oxide Modified on a Silicon Surface

Adsorption of polypropylene oxide-polyethylene oxide type surfactants at surfaces of pharmaceutical relevant materials: effect of surface energetics and surfactant structures

Mechanism of the Immobilization of Surfactants on Polymeric Surfaces by Means of an Argon Plasma Treatment: Influence of the Chemical Structure of Surfactant and Substrate

Poly(ethylene oxide)-modified carboxylated polystyrene latices--immobilization chemistry and protein adsorption.

"Loop" or "tail"? Self-Assembly and Surface Architecture of Polystyrene-Graft-Omega-Stearyl-Poly(Ethylene Oxide)

Fibrinolytic poly(dimethyl siloxane) surfaces.

Fabrication of Transparent PEGylated Antifouling Coatings via One-Step Pyrogallol Deposition

Nanoporous Films with Superior Resistance to Protein Adsorption by Selective Swelling of Polystyrene-Block-Poly(Ethylene Oxide)