Abstract:Investigating the surface morphology and microstructure of laser powder bed fusion (L-PBF) in solidification and optimizing process parameters is crucial for improving the accuracy and performance of cladding parts of GH3536 superalloy. In this study, a computational model incorporating Computational Fluid Dynamics (CFD) and Discrete Element Method (DEM) was utilized to simulate the mesoscale evolution of the molten pool in L-PBF for GH3536 superalloy. Furthermore, the growth of columnar dendrites along the fusion boundary under transient conditions was simulated utilizing a quantitative phase-field model. The impact of scanning speed and laser power on temperature distribution, molten pool size, surface morphology of cladding layer, and columnar dendrite spacing during solidification of single-track L-PBF were examined. The findings suggest that the molten pool undergoes a fast process characterized by significant temperature gradients. Increasing the laser power or reducing the scanning speed results in higher maximum molten pool temperature, as well as increased molten pool depth and width. Overlarge or undersized scanning speed and laser power can result in poor surface quality of the cladding layer. When the laser power was 120 W and the scan speed was 0.4 m/s, the cladding layer exhibited improved surface morphology, with finer columnar dendrites observed at the molten pool's base. This study delved into understanding the evolution characteristics of the molten pool and the growth process of columnar dendrites at the molten pool's base, providing valuable insights for determining appropriate experimental process parameters for L-PBF of GH3536 superalloy.

Quality Analysis of Pulsed Laser Cutting of Superalloy Sheet

Mechanical Properties and Fracture Behavior of Laser Powder-Bed-Fused GH3536 Superalloy

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Surface Quality of Pulsed Laser Cutting of Difficult to Machine Steel

Surface Quality Analysis Of Nd : Yag Pulsed Laser Cutting Of Titanium Alloy Sheet

Study of YAG Laser Cutting Process with Titanium Alloy Sheet

An Investigation of Pulsed Laser Cutting of Titanium Alloy Sheet

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Effect of laser lower and remelting on the microstructure and tribological properties of GH3230 superalloy coating fabricated by laser melting deposition

Experimental Research on Laser-Assisted Cutting of Gh4169 High Temperature Alloy

Investigation of the Effect of Laser Cutting Parameters on Surface and Kerf Quality of Thick Ti–6Al–4V Alloy Sheets

Oxidation kinetic behavior and microstructure mechanism of GH3536 alloy fabricated by laser powder bed fusion

GH3536 Superalloy Prepared by Selective Laser Melting: Microstructure and Properties

Optimizing solidification dendrites and process parameters for laser powder bed fusion additive manufacturing of GH3536 superalloy by finite volume and phase-field method

Comparative Study on Fiber Laser Welding of Gh3535 Superalloy in Continuous and Pulsed Waves

Investigation of Microstructure and Mechanical Performance of IN738LC Superalloy Thin Wall Produced by Pulsed Plasma Arc Additive Manufacturing

Comparison of surface integrity of GH4169 superalloy after high-energy, low-energy, and femtosecond laser shock peening

An Investigation of the Surface Quality and Corrosion Resistance of Laser Remelted and Extreme High-Speed Laser Cladded Ni-based Alloy Coating

Surface Ablation Properties and Morphology Evolution of K24 Nickel Based Superalloy with Femtosecond Laser Percussion Drilling

Corrosion Properties of Nd:YAG Laser–gma Hybrid Welded AA6061 Al Alloy and Its Microstructure

Microstructural Characterization of the Laser Welding in a Nickel Based Superalloy