Abstract:Polydimethylsiloxane (PDMS) is extensively used in clinical flexible electronics, due to its biocompatibility and stability. When it is employed in a stretchable epidermal sensor for long-term monitoring, PDMS must have open pores within it to assure the sweat penetration. In the present paper, we focus on the mechanical properties of porous PDMS with different volume porosities at different temperatures. The emulsion polymerization technique is applied to fabricate porous PDMS. By controlling the ratio of water to PDMS prepolymer, different porosities of PDMS were obtained, and elastic moduli of such porous PDMS were measured in experiment. Results indicate that the elastic modulus increases nonlinearly as its temperature rises from 0 °C to 40 °C (a temperature range frequently encountered in clinical applications). Meanwhile, an asymptotic homogenization method (AHM) is employed to theoretically predict the elastic modulus and Poisson's ratio of porous PDMS, whose reliability is testified by comparing the results with experimentally measured data. Further theoretical discussions on mechanical properties are carried out, and results show that the pore size of porous PDMS has almost no effect on the elastic modulus and Poisson's ratio for certain porosities. Porosity of porous PDMS, however, has significant effect on both of these two mechanical parameters. Two fitted nonlinear formulas are then proposed to estimate the elastic modulus and Poisson's ratio of porous PDMS for any volume porosity less than 50%. All the results in the present paper are essential for mechanical design and optimization of clinical flexible electronics based on porous PDMS.

The effect of pressure deformation on dielectric and conducting properties of silicone rubber/polypyrrole composites in the percolation threshold region

Effects of Hygrothermal Aging and Cyclic Compressive Loading on the Mechanical and Electrical Properties of Conductive Composites

Experimental and Theoretical Study on Mechanical Properties of Porous PDMS

Characteristics of Dielectric Relaxation and Low-Frequency Conduction in Silicone Rubber Composite

Deformation Effect on the Electrical Properties of a Flexible Organic Semiconductor composed of Poly(dimethylsiloxane) and Multiwalled Carbon Nanotubes

Effect of Uniaxial Pressure on Conduction Behavior of Carbon Black Filled Poly(methyl Vinyl Siloxane) Composites

Percolation behavior and sensing performance of polypropylene‐based conductive polymer composites under compressive strains and temperature

Resistive Viscoelasticity of Silicone Rubber/Carbon Black Composite

Effects of conductive particles on the actuating behavior of dielectric elastomer actuator

Conductivity and piezoresistivity of conductive carbon black filled polymer composite

Tunable dielectric constants and mechanical properties of PDMS and conducting polymer nanowire composites

Tunable Electrical and Mechanical Responses of PDMS and Polypyrrole Nanowire Composites

Pyroresistive response of percolating conductive polymer composites

The incompressibility assumption and piezoresistivity in stretchable conductive composites

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation

Creep of electrical resistance under uniaxial pressures for carbon black–silicone rubber composite

Effects of conductive phase content on critical pressure of carbon black filled silicone rubber composite

Study on Percolation Threshold of Silicone Rubber Conductive Composite Filled with Silver-coated Glass Beads

Interfacial effects on the electrical behavior of elastomer nanoparticulate composites

Significant Ultra-low Percolation Threshold, Enhanced Positive Temperature Coefficient Effect and Dielectric Permittivity in Polymer-based Composites with Immiscible Polymers

Alignment of Carbon Iron into Polydimethylsiloxane to Create Conductive Composite with Low Percolation Threshold and High Piezoresistivity: Experiment and Simulation