The Construction and Application of Dual‐Modified Carbon Nanotubes in Proton Exchange Membranes with Enhanced Performances
Silong Wu,Xiaohong Feng,Fei Zhong,Bingqing Zhang,Jie Wang,Ting Qu,Jing Ni,Hai Liu,Chunli Gong,Fuqiang Hu
DOI: https://doi.org/10.1002/mame.202100519
2021-01-01
Macromolecular Materials and Engineering
Abstract:In this study, the carbon nanotubes (CNTs) are successively coated via sol-gel method with SiO2 (SiO2@CNTs), followed by grafting with 3-merraptnpropyltrimethnxysilane and oxidation with hydrogen peroxide to yield dual-modified CNTs (SSiO2@CNTs). The SSiO2@CNTs material is applied to prepared chitosan (CS) based composite proton exchange membranes by the incorporation of various content of SSiO2@CNTs, the structure and properties of as-prepared composite membranes are fully investigated. Compared to pristine CS membrane, the SSiO2@CNTs-filled composite membranes show improved thermal stability, mechanical stability, and methanol resistance, owing to the effective interface interaction and good compatibility between SSiO2@CNTs and CS matrix. Additionally, the doping of SSiO2@CNTs also generates a positive effect on the electrochemistry performance, due to the construction of abundant transport channel and providing more proton sources or proton sites. Particularly, the CS/SSiO2@CNTs-7 membrane exhibits tensile strength of about 40.1 MPa and proton conductivity of 35.8 mS cm(-1) at 80 degrees C, which is almost 1.6 and 2.0 times higher than pure CS membrane, and lower methanol permeability of 0.9 x 10(-6) cm(2) s(-1). The direct methanol fuel cell performance (DMFC) of CS/SSiO2@CNTs-7 membrane is also improved with open circuit voltage of 0.67 V and maximum power density of 60.7 mW cm(-2) at 70 degrees C.