Abstract:Multi-walled carbon nanotube (MWNT)/polyurethane (PU) nanocomposites have been prepared by the combination of in-situ polymerization and solution-casting approach. A homogeneous dispersion of MWNTs throughout PU matrix is observed by scanning electron microscopy on the fracture surfaces of the composites. Strong interfacial adhesion between the MWNTs and the PU matrix, as evidenced by the presence of broken but strongly embedded MWNTs in the matrix, is favorable to stress transfer from polymer matrix to the nanotubes. Mechanical tests (by tensile testing and dynamic mechanical analysis) show that, compared with neat PU, both the Young's modulus and the tensile strength of the composites are significantly improved by about 90%, with incorporating only I wt.% MWNTs. And most importantly, the elongation-at-break of PU/carbon nanotube (CNT) composites is greatly improved by about 500%, indicating that the toughness of neat PU is remarkably enhanced by adding CNTs into the matrix. The fine dispersion of CNTs and strong interfacial adhesion between the CNTs with the matrix are responsible for the simultaneous and significant enhancement in the strengthening and toughening of PU matrix. In addition, the thermal stability of PU was also improved after incorporating CNTs into the matrix.

Preparation of Polyurethane/Carbon Nanotubes Composite Foams Through One-Step Method

PREPARATION OF POLYURETHANE/CARBON NANOTUBES COMPOSITES FOAM THROUGH in Situ POLYCONDENSATION

Preparation of Cellulose/MWCNTs/TPU Micro-foam Composites

Stiffness, Energy Dissipation, and Hyperelasticity in Hierarchical Multilayer Composite Nanocoated Open‐Cell Polyurethane Foams

Preparation and characterization of polyurethane–carbon nanotube composites

Preparation and characterization of polyurethane/multiwalled carbon nanotube composites

Preparation and Mechanical Properties of Waterborne Polyurethane/Carbon Nanotube Composites

Piezoresistive and Compression Resistance Relaxation Behavior of Water Blown Carbon Nanotube/polyurethane Composite Foam

Electrical Conductivity and Major Mechanical and Thermal Properties of Carbon Nanotube‐filled Polyurethane Foams

Preparation of Carbon Nanotubes/waterborne Polyurethane Composites with the Emulsion Particles Assisted Dispersion of Carbon Nanotubes

Preparation and properties of polyurethane/multiwalled carbon nanotube nanocomposites by a spray drying process

Preparation and Properties of Multi-Walled Carbon Nanotube/carbon/polystyrene Composites

The Preparation of Biodegradable Polyurethane/carbon Nanotube Composite Based on in Situ Cross‐linking

Preparation and Properties of Carbon Fiber/polyether Polyurethane Composites

Effect of Surface Modifications of Carbon Black (CB) on the Properties of CB/polyurethane Foams

Synthesis and Mechanical Properties of Lightweight Hybrid Geopolymer Foams Reinforced with Carbon Nanotubes

Conductive Rigid Polyurethane Foams with Negative Temperature Coefficient

Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance

Effect of Multi-walled Carbon Nanotubes on Mechanical, Thermal and Electrical Properties of Phenolic foam via In-situ Polymerization

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

In Situ Preparation of Intrinsic Flame Retardant Urea Formaldehyde/aramid Fiber Composite Foam: Structure, Property and Reinforcing Mechanism