Abstract:The main focus in the analysis of pool or flow boiling in saturated or subcooled conditions is the basic understanding of the phase change process through the heat transfer and wall heat flux partitioning at the heated wall and the two-phase bubble behaviours in the bulk liquid as they migrate away from the heated wall. This paper reviews the work in this rapid developing area with special reference to modelling nucleate boiling of cryogenic liquids in the context of computational fluid dynamics and associated theoretical developments. The partitioning of the wall heat flux at the heated wall into three components – single-phase convection, transient conduction and evaporation – remains the most popular mechanistic approach in predicting the heat transfer process during boiling. Nevertheless, the respective wall heat flux components generally require the determination of the active nucleation site density, bubble departure diameter and nucleation frequency, which are crucial to the proper prediction of the heat transfer process. Numerous empirical correlations presented in this paper have been developed to ascertain these three important parameters with some degree of success. Albeit the simplicity of empirical correlations, they remain applicable to only a narrow range of flow conditions. In order to extend the wall heat flux partitioning approach to a wider range of flow conditions, the fractal model proposed for the active nucleation site density, force balance model for bubble departing from the cavity and bubble lifting off from the heated wall and evaluation of nucleation frequency based on fundamental theory depict the many enhancements that can improve the mechanistic model predictions. The macroscopic consideration of the two-phase boiling in the bulk liquid via the two-fluid model represents the most effective continuum approach in predicting the volume fraction and velocity distributions of each phase. Nevertheless, the interfacial mass, momentum and energy exchange terms that appear in the transport equations generally require the determination of the Sauter mean diameter or interfacial area concentration, which strongly governs the fluid flow and heat transfer in the bulk liquid. In order to accommodate the dynamically changing bubble sizes that are prevalent in the bulk liquid, the mechanistic approach based on the population balance model allows the appropriate prediction of local distributions of Sauter mean diameter or interfacial area concentration, which in turn can improve the predictions of the interfacial mass, momentum and energy exchanges that occur across the interface between the phases. Need for further developments are discussed.

Mechanical nonequilibrium considerations in homogeneous bubble nucleation for unsteady-state boiling

Influence of Hydrodynamic Interactions among Multiple Bubbles on Convective Heat Transfer in Nucleate Boiling

Computational fluid dynamics and population balance modelling of nucleate boiling of cryogenic liquids: Theoretical developments

Thermodynamic Model for Heterogeneous Bubble Nucleation in a Temperature Gradient

Molecular dynamics study on the enhancement of heterogeneous nucleate boiling of mixed liquid on superhydrophilic surfaces

NUCLEATION AND THERMODYNAMIC NONEQUILIBRIUM FOR BOILING IN MICROCHANNELS AND MICROSTRUCTURES

A thermodynamic analysis for heterogeneous boiling nucleation on a superheated wall

A Mechanistic Model for Slightly Subcooled Flow Boiling in Vertical Tubes

Nucleation site interaction during boiling

A Unified Relationship Between Bubble Departure Frequency and Diameter During Saturated Nucleate Pool Boiling

Experimental and Theoretical Study of Bubble Coalescence and Departure Behaviors During Nucleate Pool Boiling on Uniform Smooth and Micro-Pin-finned Surfaces under Different Subcoolings and Heat Fluxes

Investigation of water bubble nucleation by using molecular dynamics simulation

Seeding Approach to Bubble Nucleation in Superheated Lennard Jones Fluids

How heterogeneous wettability enhances boiling

Modeling of Low-Pressure Subcooled Boiling Flow of Water Via the Homogeneous MUSIG Approach

Molecular Dynamics Simulation of Homogeneous and Heterogeneous Thermal Bubble Nucleation

Direct Numerical Simulation of single bubble dynamics in nucleate pool boiling with micro-region modeling and thermal coupling to a solid wall

Analyses of Bubble Dynamics in Subcooled Boiling Flow Using Euler-Lagrange Method

Nonlinear Aspects of Boiling Systems and A New Method for Predicting the Pool Nucleate Boiling Heat Transfer

Modeling of vapor bubble dynamics considering the metastable fluid state

Effect of Solid Properties on the Process of Bubble Nucleation: a Molecular Dynamics Study