Abstract:In this study, we controlled the growth of crystalline plane to synthesize the vertical platinum nanopelts onto fluorine doped tin oxide (FTO) glass to construct the platinum nanoroses (PtNRs) by an easy electrochemical deposition (ECD) method at room temperature in the normal atmospheric environment, and applied the PtNRs as a counter electrode (CE) for dye-sensitized solar cell (DSSC). The morphologies and crystalline nanostructures of the ECD PtNRs were examined by field emission scanning electron microscopy and the high-resolution transmission electron microscopy. The electrocatalytic properties of the ECD PtNRs were analyzed by cyclic voltammetry and electrochemical impedance spectrum. The power conversion efficiency (PCE) of the DSSC assembled with the ECD PtNRs CE was examined under the illumination of AM 1.5 (100mWcm−2). The ECD PtNRs showed well contact behavior with FTO surface and offered a large surface area to promote the redox reaction rates therefore increased the exchange current density. Due to the PtNRs showed the macroporous structure, the electrolyte can easily diffuse through the open space between the nanopelts, resulting in improved kinetics for charge-transfer processes and reduced the charge-transfer resistance. Our findings suggest that the catalytic efficiency of PtNRs with a specific crystal plane was significantly greater than that of a traditional Pt film catalyst. In combination with a N719 dye-sensitized TiO2 working electrode and an iodine-based electrolyte, the DSSC assembled with the PtNRs CE achieved a PCE of 6.58%, almost 10% higher than that of a cell prepared with a conventional sputtering Pt film CE (6.00%). These results provide a potential strategy for electrochemical catalytic applications.

Performance of Dye-Sensitized Solar Cells with Various Carbon Nanotube Counter Electrodes

Graphitic Carbon Nitride/multiwalled Carbon Nanotubes Composite As Pt-free Counter Electrode for High-Efficiency Dye-Sensitized Solar Cells

Application of Non-Covalent Functionalized Carbon Nanotubes for the Counter Electrode of Dye-Sensitized Solar Cells

Enhanced Efficiency of Dye-Sensitized Solar Cells Based on Polymer-Assisted Dispersion of Platinum Nanoparticles/Carbon Nanotubes Nanohybrid Films as FTO-Free Counter Electrodes

Nitrogen-doped carbon nanotubes with metal nanoparticles as counter electrode materials for dye-sensitized solar cells.

Anthocyanin-sensitized Solar Cells Using Carbon Nanotube Films As Counter Electrodes

Cu2ZnSnS4/N-MWCNTs hybrid systems as counter electrode substitutes for platinum in dye-sensitized solar cells

Functionalization of Aligned Carbon Nanotubes Used As Counter Electrode for Dye-Sensitized Solar Cells

Enhancement of the Efficiency of Dye-Sensitized Solar Cell with Multi-Wall Carbon Nanotubes/polythiophene Composite Counter Electrodes Prepared by Electrodeposition

Performance Of Dye-Sensitized Solar Cells Based On Mwcnt/Tio2-Xnx Nanocomposite Electrodes

Carbon Nanostructured Fibers As Counter Electrodes in Wire-Shaped Dye-Sensitized Solar Cells

Carbon/F-Doped Sno2 Nanowires Array Counter Electrode For Dye Sensitized Solar Cell

Electrospun carbon nanofibers with surface-attached platinum nanoparticles as cost-effective and efficient counter electrode for dye-sensitized solar cells

Low-cost Counter Electrodes Based on Nitrogen-Doped Porous Carbon Nanorods for Dye-Sensitized Solar Cells

Fabrication and Characterization of a Multi-Walled Carbon Nanotube-Based Counter Electrode for Dye-Sensitized Solar Cells

Enhancement of the Efficiency of Dye-Sensitized Solar Cell with Multi-Wall Carbon Nanotubes/Polypyrrole Composite Counter Electrodes Prepared by Electrophoresis/Electrochemical Polymerization

In Situ Growing CNTs Encapsulating Nickel Compounds on Ni Foils with Ethanol Flame Method As Superior Counter Electrodes of Dye-Sensitized Solar Cells

Multiwalled carbon nanotubes confined Mo 2 C nanoparticles as counter electrodes for boosting triiodide reduction reaction in dye-sensitized solar cells

High Performance Dye-Sensitized Solar Cells Based on Platinum Nanoroses Counter Electrode

A Sulfur-Assisted Strategy to Decorate MWCNTs with Highly Dispersed Pt Nanoparticles for Counter Electrode in Dye-Sensitized Solar Cells

Tio2 Composing with Pristine, Metallic or Semiconducting Single-Walled Carbon Nanotubes: Which Gives the Best Performance for A Dye-Sensitized Solar Cell