Abstract:The interdigital transducer (IDT) of the traditional Mach-Zehnder (MZ) acousto-optic modulator on a silicon-oninsulator (SOI) platform is located outside its two arms. The crest and trough of the surface acoustic wave (SAW) are used to modulate the two arms of the MZ interferometer so as to achieve a high modulation efficiency. Therefore, the distance between the two arms must be odd multiples of half acoustic wavelength. However, since the substrate is usually not uniform, the wavelength of the SAW changes as it transmits through the surface of the device. As a result, the exact distance between the two arms is difficult to choose. On the other hand, the SAW losses a portion of energy after passing through the first arm of the MZ interferometer, so the modulation of the second arm becomes much weaker. To solve these problems, we propose a new structure where its IDT is situated in the middle of the two arms of the MZ interferometer. With this scheme, the two arms of the MZ interferometer are located exactly at the crest and the trough of the SAW, while they are modulated with equal strength. In this paper, we first use the finite element method to simulate the acoustic frequency and the surface displacement of the excited SAW. Then we deduce the refractive index variations of all layers according to their acousto-optic effects. After that, we analyze the influences of different factors on the acousto-optic modulation efficiency, including the type and size of waveguide, the thickness of zinc oxide (ZnO) layer, and the area it covers, the number of electrodes, etc. These parameters are accordingly optimized to enhance the modulation efficiency. Modeling result based on COMSOL Multiphysics indicates that when the width of the strip waveguide is 6 mu m, the ZnO layer covers only the area under the IDT and has a thickness of 2.2 mu m, and the number of the electrodes is 50, the effective refractive index variation of the waveguide reaches 4.08 x 10(-4) provided that the amplitude of the driving voltage is 1 V. This value is 12% higher than that of the traditional structure.

All-Optical Modulation with a Surface Plasmon Mach–Zehnder Interferometer

All-Optical Modulator with Long Range Surface Plasmon Resonance

Multiplexing-oriented nonlinear plasmon-assisted MoS$_2$ metasurfaces driven by the quasi bound states in the continuum

An improved Mach-Zehnder acousto-optic modulator on a silicon-on-insulator platform

Electromagnetically-Induced-Transparency Plasmonics: Quantum-Interference-Assisted Tunable Surface-Plasmon-Polariton Resonance and Excitation

Subwavelength Device Based on Surface Plasmon Polariton

Photothermal Modulation of Propagating Surface Plasmons on Silver Nanowires

Efficient All-Optical Molecule-Plasmon Modulation Based on T-shape Single Slit

Design of hybrid structure for fast and deep surface plasmon polariton modulation.

Surface Plasmon Polariton Modulator Based on Electro-Optic Polymer

A Wideband Electro-Optic Modulator Based on Long Range Surface Plasmon Resonances

Highly Efficient All-Optical Control of Surface-Plasmon-Polariton Generation Based on a Compact Asymmetric Single Slit

Photothermal Switching Based on Silicon Mach–Zehnder Interferometer Integrated with Light Absorber

Highly Efficient Silicon Michelson Interferometer Modulators

All-optical modulation based on MoS 2 -Plasmonic nanoslit hybrid structures

Plate-slot polymer waveguide modulator on silicon-on-insulator

All-fiber modulator derived from the large-transverse-offset Mach-Zehnder interferometer coated with ITO

Dual-Channel Fiber Surface Plasmon Resonance Biological Sensor Based on A Hybrid Interrogation of Intensity and Wavelength Modulation

Plasmonic waveplate: incident polarization modulation

Ultra-sensitive All-Optical Phase Modulation Based on a Fiber Optic Interferometer Combined with Ti3C2Tx MXene-incorporated PDMS

Active control of surface plasmon resonance in MoS2-Ag hybrid nanostructures