Abstract:Reinforced concrete (RC) bridge piers of highway viaducts are exposed to the vehicular impact hazard with impact location usually close to the ground (i.e., bottom of the pier), thus resulting in dominant shear damage. Different simplified approaches for the assessment of RC bridge pier performance under impact loads are generally based on equivalent static models. One crucial element for these approaches is the determination of the static shear performances and residual axial capacity. Because of limited experimental results available under these conditions, six half-scale rectangular RC columns with different volumetric reinforcement ratios and axial compressive loads were tested under near-ground lateral loads with monotonic static conditions. Test results indicate a clear major diagonal crack at the bottom of RC columns with an inclination angle of approximately 30 degrees below the point of application of the lateral load, and it eventually slips along the crack surface under axial loads followed by failure (i.e., loss of residual axial capacity). The increase in the volumetric reinforcement ratio significantly improves the shear deformation capacity and shear crack resistance with a slight increase in the shear capacity. The increase in the axial load can also slightly increase the shear capacity of the columns but is accompanied by a reduction in shear deformation capacity. Additionally, prediction performances of three commonly used shear capacity models for the case of RC columns under near-ground lateral loads are investigated. Finally, based on the test results, an existing residual axial capacity model is modified to improve its prediction performance.

Unified Expression for Failure of Reinforced Concrete Members in Bridge

Unified Approach for Analysis of Box-Section Members under Combined Actions

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Static Shear Performance and Residual Axial Capacity of Rectangular RC Bridge Piers under Near-Ground Lateral Loads

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Methods of Reliability Analysis Based on Serviceability Limited State for Existing Reinforced Concrete Bridges

A Unified Approach for Determining the Ultimate Strength of RC Members Subjected to Combined Axial Force, Bending, Shear and Torsion

Unified Failure Model on the Reinforced Concrete Members with Box Section

Ultimate Strength of Annular Reinforced Concrete Members under Combined Actions

Unified Failure Model of Reinforced Concrete Members Subjected to Hazard Loads I: Ductile Failure Analysis

Unified Failure Model on the Reinforced Concrete Members with Annular Section

Limit Analysis for Reinforced Concrete Rectangular Members under Bending, Shear and Torsion

New Unified Failure Model on Evenly Distributed Reinforced Concrete Members with Box Section

Ultimate Capacity of Reinforced Concrete Rectangular Members Subjected to Combined Actions

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

The General Failure Expression on Reinforced Concrete Members with Annular Section

Numerical failure analysis of a continuous reinforced concrete bridge under strong earthquakes using multi-scale models

Advanced Unified Failure Model on Uniformly Reinforced Concrete Annular Section Members

Coupled Effect of Loading and Environment of Concrete Bridge in Service Life

Comparative Study on the Methods for Analyzing Transverse Intemal Force of Prestressed Concrete Box Girder Bridge

Disease Analysis and Reinforcement of Concrete Bridge Substructure