Preparation and Applications of Intercalated ZnAl-LDHs

Zhang Yuxin,Hao Xiaodong,Dong Meng

DOI: https://doi.org/10.14159/j.cnki.0441-3776.2012.02.015

2012-01-01

Chemistry

Abstract:The fundamental preparative routes and the development of intercalation assembly and exfoliation of ZnAl-layered double hydroxides were reviewed.Their promising applications in the field of catalysis,medicine,anion absorption and functional polymer were also summarized.

What problem does this paper attempt to address?

Morphologies, Preparations and Applications of Layered Double Hydroxide Micro-/Nanostructures

Ye Kuang,Lina Zhao,Shuai Zhang,Fazhi Zhang,Mingdong Dong,Sailong Xu

DOI: https://doi.org/10.3390/ma3125220

2010-12-09

Abstract:Layered double hydroxides (LDHs), also well-known as hydrotalcite-like layered clays, have been widely investigated in the fields of catalysts and catalyst support, anion exchanger, electrical and optical functional materials, flame retardants and nanoadditives. This feature article focuses on the progress in micro-/nanostructured LDHs in terms of morphology, and also on the preparations, applications, and perspectives of the LDHs with different morphologies.
Three-dimensional layered double hydroxide membranes: fabrication technique, growth mechanism, and enhanced photocatalytic activity.

Li Xue,Zhipeng Lü,Yingzhi Cheng,Xiuyu Sun,Hongtao Lin,Xiaoling Xiao,Xiangfeng Liu,Shuping Zhuo

DOI: https://doi.org/10.1039/c8cc04162h

IF: 4.9

2018-01-01

Chemical Communications

Abstract:Novel three-dimensional ZnAl-LDH/AAO and NiAl-LDH/AAO membranes using porous anodic aluminum oxide (AAO) templates as a substrate and an Al3+ source were successfully fabricated via a simple precipitant-free in situ growth technique. These membranes with uniform layered double hydroxide (LDH) plates on the outer and inner surfaces exhibit enhanced activities in photocatalysis.
Progress in Supramolecular Intercalation and Assembly of Organic Anion Pillared Layered Double Hydroxides

孟锦宏,张慧,王治强,D.G.Evans,段雪

DOI: https://doi.org/10.3969/j.issn.0441-3776.2003.02.003

2003-01-01

Abstract:Progress in supramolecular intercalation and assembly of organic anion pillared layered double hydroxides (organo-LDHs) has been reviewed. It is mainly reported that methods of intercalation and assembly, structure features and its characteristic techniques, as well as applications in catalysis, photochemistry, electrochemistry, adsorption, and controlled-releasing aspects.
Preparation and Wettability of Zn–Al Layered Double Hydroxide Film Directly Grown on Highly Porous Anodic Alumina Oxide Template

Feng Yang,Bo Yu Xie,Jing Zhi Sun,Ha Ke Jin,Mang Wang

DOI: https://doi.org/10.1016/j.matlet.2007.08.069

IF: 3

2008-01-01

Materials Letters

Abstract:Zinc-aluminum layered double hydroxide (Zn-Al LDH) thin films were prepared by direct precipitation on the surface of porous anodic alumina oxide (AAO) template. The Zn-Al LDH was assigned to Zn6Al12(OH)(16)CO3.nH(2)O according to the XRD and EDX data. The nano-pores provided channels and the nano-sized wall-edges for supplying Al3+ and highly active reaction sites, thereby the Zn-Al LDH films can be grown more efficiently on porous AAO membrane than those on flat bulk alumina oxide surface. The water contact angle (CA) of the as-prepared Zn-Al LDH films was measured to be 122 degrees, indicating a hydrophobic surface, but after calcination at 600 degrees C for 2 h, the water CA became 65 degrees, suggesting a hydrophilic surface. Comparative analyses of the surface morphological characteristics and elements with respect to the as-prepared and calcined films implied a thermal induced reconstruction of the Zn-Al LDH structure, which was ascribed to the changes of surface wettability. (C) 2007 Elsevier B.V. All rights reserved.
Highly atom-economic synthesis and scale-up production of zinc-aluminum layered double hydroxides

Kaitao Li,Wenze Li,Yifan Zhao,Wendi Liu,Rui Tian,Yanjun Lin

DOI: https://doi.org/10.1016/j.ces.2023.119376

IF: 4.7

2023-10-15

Chemical Engineering Science

Abstract:ZnAl layered double hydroxides (LDHs) has been widely applied as functional additives in polymers. The common coprecipitation method used to synthesize ZnAl LDHs has an atomic utilization of only 44.35 %, and is accompanied with the formation of sodium salt by-product, ZnO impurities and lots of waste water. In this work, we proposed a green and cost-effective synthesis route with 100 % atom economy to prepare ZnAl LDHs from mixed metal oxides and hydroxides. Pure ZnAl LDHs was synthesized at 120 °C. A dissolution-nucleation-diffusion reaction mechanism was proposed through structural and morphological studies and reaction kinetics calculations. The prepared ZnAl LDHs exhibited excellent smoke suppression properties, with a reduction in the smoke density of PVC from 705 to 340. This proposed method was successfully scaled-up and applied on a 1000 t/a industrial production line, providing a valuable opportunity for the reaction design and large-scale preparation of LDHs and other inorganic compounds.

engineering, chemical
Preparation and application of layered double hydroxide nanosheets

Yaping Zhang,Huifang Xu,Song Lu

DOI: https://doi.org/10.1039/d1ra03289e

IF: 4.036

2021-01-01

RSC Advances

Abstract:Layered double hydroxides (LDHs) with unique structure and excellent properties have been widely studied in recent years.

chemistry, multidisciplinary
Advanced Exfoliation Strategies for Layered Double Hydroxides and Applications in Energy Conversion and Storage

Chen Chen,Li Tao,Shiqian Du,Wei Chen,Yanyong Wang,Yuqin Zou,Shuangyin Wang

DOI: https://doi.org/10.1002/adfm.201909832

IF: 19

2020-04-01

Advanced Functional Materials

Abstract:<p>Along with the increasing aggravation of energy and environmental problems, the demand and utilization of renewable energy have increased. The rational design of advanced functional materials serves as a critical point for the improvement of performance and the practical application in renewable energy devices. Layered double hydroxides (LDHs) with 2D layered structures are promising energy materials for their unique physical and chemical properties. Nevertheless, the applications are limited by the structure of stacking with irrational electronic structure, sluggish mass transfer, and low activity. The exfoliation of LDHs into single‐ or few‐layered nanosheets appears to be a promising approach to overcome the above disadvantages. Herein, the recent progress on the development of exfoliation strategies for LDHs including liquid phase exfoliation, plasma‐induced exfoliation, and other advanced exfoliation strategies is highlighted and the applications in energy conversion and storage are systematically introduced.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Dispersive Behaviors of Organic Anion Intercalated Layered Double Hydroxides in Organic Solvents

王盎然,包永忠,翁志学,黄志明

DOI: https://doi.org/10.3724/sp.j.1095.2010.90767

2010-01-01

Abstract:4-Styrene sulphonate intercalated layered double hydroxide(LDH)(MgAl-SS LDH), 10-undecylenate intercalated LDH(MgAl-U LDH), polyoxyethylene(10) α-propenyl alkylphenyl ether sulfate(HS-10) intercalated LDH(MgAl-HS10 LDH) were prepared by co-precipitation methods, respectively. The structure of LDH was characterized by X-ray diffraction, fourier transform infrared spectrometry, element analysis, and energy spectrum analysis. Three kinds of LDH were dispersed in different solvents. The particle size and morphology of LDH dispersions were investigated by laser particle analyzer and transmission electron microscope. It was found that MgAl-HS10 LDH could be well dispersed and partially exfoliate in dimethyl sulfoxide. Hansen′s three-dimensional solubility parameters were adopted to explain the dispersion activity of LDH. LDH dispersions were stable when the Hansen′s dimensional solubility parameters of the hydrophobic groups of intercalated agents are similar to those of the solvents. LDH layer has a strong exfoliation tendency when both polar(δp) and hydrogen-bonding(δh) forces of the hydrophobic groups of the intercalated agents are comparable to those of the solvents.
Long-Range and Short-Range Structures of Multimetallic Layered Double Hydroxides

Wenxian Gou,Xiaoming Wang,Mengqiang Zhu,Dong-Xing Guan,Xinxin Mo,Hongtao Wang,Wei Li

DOI: https://doi.org/10.1021/acs.jpcc.2c00121

2022-01-01

Abstract:Layered double hydroxides (LDHs) are a family of anionic clays that have wide applications in environmental remediation, catalysis, and nanocomposite materials. These excellent performances heavily depend on the cation arrangements of LDHs, and thus, a thorough understanding of this cation arrangement is of significance to the functional optimization of LDHs. The cation arrangements of LDHs, however, remain obscure because of the small particle size and stacking defects. This study synthesized seven multimetallic layered double hydroxides (LDHs) with a composition of [Me0.66Al0.33(OH)(2)](CO3, NO3)(0.17-0.33)center dot(0.79-1.01)H2O (Me = Co, Ni, and/or Zn) through a coprecipitation method at pH 7.5. Multiple advanced techniques, including pair distribution function, extended X-ray absorption fine structure, wavelet transform analysis, and nuclear magnetic resonance spectroscopy, were employed to characterize the cation arrangement. The results suggest that Co, Ni, and/or Zn are distributed randomly with Al in the seven LDHs, all of which reside in the octahedral site coordinated by six oxygen atoms. The random distribution of Co/Ni/Zn and Al deviates from Pauling's rule, which would require no edge sharing of AlO6 octahedra in LDHs with a ratio of Me2+/Me3+ equal to 2. The cation disorder of the seven LDHs is likely related to the neutral pH used in the synthetic process. This study provides detailed structural information of the seven LDHs at the atomic level, which helps shed light on the future understanding of the structure-function relationship of short-range structural ordering nanomaterials.
Structural features and dynamic behaviour of the interlayer space of layered double hydroxide coatings

S. Soulé,P. Durand,S. El-Kirat-Chatel,F. Quilès,C. Carteret

DOI: https://doi.org/10.1016/j.mtchem.2024.101897

IF: 7.613

2024-01-01

Materials Today Chemistry

Abstract:Layered double hydroxide (LDH) offer great potentialities to design functional coatings with customizable properties by exploiting their anion exchange properties. We investigated the anion exchange properties and expansion capacity of the interlayer space relating to the starting film morphology. ZnAl LDH coatings of different thicknesses and morphologies were first obtained by an in situ method using Al-based substrates. When the anion to intercalate is relatively bigger than the starting nitrates, the intercalation may be constrained by the initial LDH particle size and density composing the film. After optimising the morphology, the intercalation of three functional anions with potential antimicrobial properties was successfully achieved with an expansion of the interlayer space up to 150 % while holding the coating integrity. The release of the guest anion was studied by immersion in physiological saline solution. Finally, the possibility to regenerate the coating was demonstrated supporting the potential of these hybrid coatings for applications.

chemistry, multidisciplinary,materials science
Contribution of Sodium Dodecyl Sulphate and Sodium Lauric Acid in the One-Pot Synthesis of Intercalated ZnAl-layered Double Hydroxides

FENGZHU LV,ZILIN MENG,PENGGANG LI,YIHE ZHANG,GUOCHENG LV,QIAN ZHANG,ZHILEI ZHANG

DOI: https://doi.org/10.1007/s12034-015-0956-2

IF: 1.878

2015-01-01

Bulletin of Materials Science

Abstract:Anion surfactants, sodium dodecyl sulphate (SDS) and sodium lauric acid (SLA), with almost the same chain length but different anion groups were used together as intercalates to prepare intercalated ZnAl–layered double hydroxides (ZnAl–LDHs). Their composition, structure and morphology were characterized by Fourier transform infrared, X-ray fluorescence, thermogravimetric and X-ray diffraction (XRD). The results indicated SDS intended to maintain the lamellae structure of LDHs, but SLA was more likely to expand the basal spacings of LDHs in the present system. The arrangement of the surfactants in the interlayer of ZnAl–LDHs was also simulated by Materials Studio. The basal spacings of the LDHs calculated based on simulated structure consisted with that from XRD.
Transition Metal Based Layered Double Hydroxides Tailored for Energy Conversion and Storage

Xia Long,Zilong Wang,Shuang Xiao,Yiming An,Shihe Yang

DOI: https://doi.org/10.1016/j.mattod.2015.10.006

IF: 24.2

2016-01-01

Materials Today

Abstract:Layered double hydroxides (LDHs) are a class of clays with brucite like layers and intercalated anions. The first (3d) series transition metals based LDHs (TM-LDHs) are attracting increasing interest in the field of energy conversion and storage processes due to their unique physicochemical properties. In this article, we review recent developments in the synthesis and applications of TM-LDH in these areas including water splitting, CO2 conversion, metal-air batteries and supercapacitors and the underlying mechanisms of these processes. In addition, current challenges and possible strategies are discussed from the viewpoint of material design and performance.
Construction of ZnAl LDH-Derived Sulfides with Etching Modification to Trigger Photocatalytic H 2 Production and Degradation Oxidation

Jun Hu,Syed Aamir Hussain,Hongyin Liu,Chenghui Hu,Feipeng Jiao

DOI: https://doi.org/10.1021/acs.inorgchem.4c03082

IF: 4.6

2024-09-03

Inorganic Chemistry

Abstract:Constructing novel functional photocatalysts represents a promising approach to optimize the energy band structure and facilitate the separation of photogenerated carriers. Layered double hydroxides (LDHs) exhibit notable advantages in photocatalysis due to the exceptional photoelectrochemical properties and elevated number of active surface atoms. However, an unsuitable band gap and limited carrier migration have inhibited their development in photocatalysis. Herein, we propose a novel in situ...

chemistry, inorganic & nuclear
Fabrication of zinc-aluminum layer double hydroxide thin films and their anionic adsorption performance

S. Laksee,W. Chitaka,K. Laohhasurayotin,C. Suwanchawalit,,,,

DOI: https://doi.org/10.15251/djnb.2022.171.127

2022-01-01

Digest Journal of Nanomaterials and Biostructures

Abstract:Layered double hydroxides (LDHs) are also known as hydrotalcite-like compounds or anionic clays. In this work, ZnAl-LDH films were prepared on aluminium (Al) plates by a hydrothermal technique using zinc nitrate solution as the precursors. ZnAl-LDHs films were characterized by SEM, EDX, XRD and FT-IR. The SEM analysis revealed that the ZnAl-LDH films with hierarchical nanoarchitectures on the surface of Al plates. EDX mapping and elemental analysis also showed that Zn, Al, and O dispersed uniformly on the aluminium substrates. XRD results were used to confirm the presence of ZnAl-LDH films as they appeared purely with the typical (003) and (006) peaks of LDH diffraction. The characteristic bands of bending vibrations due to the intercalating water, stretching vibration due to the overlapping signal of carbonate anion and nitrate anion were measured by FT-IR spectroscopy. The brucite structure also exhibited the OH-stretching vibration as well as the ZnO lattice vibration in the spectra. These ZnAl-LDH forms were evaluated for their removal performance against orange II dye solutions.

materials science, multidisciplinary,nanoscience & nanotechnology
A Green Route for the Preparation of Layered Double Hydroxides from Basic Magnesium Carbonate

Li Jin,Xiaoyuan Zhou,Juan Wen,Luming Peng

DOI: https://doi.org/10.1016/j.mrl.2022.06.004

2022-01-01

Magnetic Resonance Letters

Abstract:Layered double hydroxides (LDHs) have received extensive attention in many fields such as catalysis, environmental management and medical applications. Typically, expensive soluble metal salts are commonly used as the starting materials for the synthesis of LDHs. Here, we report a novel synthesis route for Mg/Al-LDH by using inexpensive basic magnesium carbonate as the starting material. X-ray diffraction (XRD) and solid-state nuclear magnetic resonance (ssNMR) data show that LDHs with rich defects are formed rapidly at room temperature and good crystallinity can be obtained after further hydrothermal treatment. These results provide a simple, rapid and green preparation method for LDHs.
Facile assembly for fast construction of intercalation hybrids of layered double hydroxides with anionic metalloporphyrin.

Juanjuan Ma,Lin Liu,Shanzhong Li,Yonghao Chen,Meng Zhuo,Feng Shao,Junyan Gong,Zhiwei Tong

DOI: https://doi.org/10.1039/c4dt00967c

IF: 4

2014-01-01

Dalton Transactions

Abstract:Anionic manganese tetrasulfonatophenyl porphyrin (MnTSPP) has been intercalated into the interlamellar space of Mg-Al and Ni-Al layered double hydroxides (LDHs) through the exfoliation/restacking approach by using exfoliated LDH nanosheets and guest molecules as building blocks. The obtained hybrids were characterized by a variety of analytical techniques such as CHN analysis, XRD, FTIR, SEM, HRTEM, UV-vis spectroscopy and thermal analysis. Interlayer spacings determined from XRD patterns reveal a perpendicular orientation of the MnTSPP anions between the hyroxylated layers of both LDHs. The results of zeta potential measurements give information about the surface charge change of LDH nanoparticles associated with the spontaneous coassembly process. The catalytic performance of the heterogeneous catalysts MnTSPP/Mg-Al LDH2.0 and MnTSPP/Ni-Al LDH1.0 for the epoxidation of cyclohexene was investigated using molecular oxygen as an oxidant and isobutylaldehyde as a co-reductant. The intercalated hybrids appear to be promising catalysts owing to their good catalytic activity and selectivity.
Facile Synthesis of ZnAl-layered Double Hydroxide Microspheres with Core–shell Structure and Their Enhanced Adsorption Capability

Yong Lin,Zhikai Zeng,Jiarong Zhu,Yong Wei,Song Chen,Xue Yuan,Lan Liu

DOI: https://doi.org/10.1016/j.matlet.2015.04.032

IF: 3

2015-01-01

Materials Letters

Abstract:We have developed a simple solution route for the synthesis of hierarchical ZnAl-layered double hydroxide (ZnAl-LDH) microspheres with core–shell structure, which have great practical application as the efficient adsorbent for wastewater purification. The evolution of the morphology with time suggests that the hierarchical ZnAl-LDH microspheres formed by a stepwise growth mechanism. The results demonstrate that the as-prepared ZnAl-LDH microspheres exhibit more excellent adsorption capacity (523mg/g) towards methyl orange in aqueous solutions as compared with the LDH microspheres previously reported, result of which is attributed to their enhanced surface area and suitable mesopore distribution. This work provides a promising approach for the synthesis of hierarchical porous materials with excellent adsorption capacity, which can be potentially used in wastewater treatment.
In-situ Observation of the Growth Behavior of ZnAl Layered Double Hydroxide Film Using EQCM

Youbin Wang,Yusheng Zhang,Bingtao Zhou,Chunmin Li,Feng Gao,Xinpeng Wang,Duogiang Liang,Yuezhou Wei

DOI: https://doi.org/10.1016/j.matdes.2019.107952

IF: 9.417

2019-01-01

Materials & Design

Abstract:ZnAl layered double hydroxides (LDHs) film was prepared on the pure Al by an in-situ growth method. In-situ observation of the growth behavior of ZnAl-LDHs-NO3 film was studied by electrochemical quartz crystal microbalance (EQCM) and open circuit potential (OCP). The characteristics of the ZnAl-LDHs-NO3 film was analyzed through the X-ray diffraction, X-ray photoelectron spectroscopy and scanning electronic microscope. The corrosion behavior of the LDHs film was investigated by the electrochemical impedance spectroscopy and polarization curves. The results indicate that the growth process of the ZnAl-LDHs-NO3 film can be divided into the dissolution of Al substrate stage, the formation of Al(OH)3 stage, the nucleation of ZnAl-LDHs-NO3 stage and the growth of ZnAl-LDHs stage. The growth mechanism of each stage is explained in detail. The ZnAl-LDHs film is composed of the interconnected two-dimensional nano-sheets, and the microcrystals grow perpendicular to the Al substrate and cover the entire Al substrate surface. The size and thickness of the ZnAl-LDHs nano-sheets gradually increase with the increasing of the growth time, meantime, the [Zn2+]/[Al3+] content ratio in the ZnAl-LDHs also increases. The ZnAl-LDHs film can significantly improve the corrosion resistance of the Al substrate.
Enhancement the properties of ZnAl-LDH for photocatalytic nitrogen reduction reaction by controlling anion intercalation

Sen-Da Su,Xiaoman Li,Mengyao Tan,Xu Zhang,Yingying Wang,Yanzhong Duan,Juan Peng,Min Luo

DOI: https://doi.org/10.1039/d2qi02030k

IF: 7.779

2022-12-02

Inorganic Chemistry Frontiers

Abstract:The Layered double hydroxides (LDHs) have been shown to be efficient photocatalysts for nitrogen fixation reactions. However, the effect of interlayer anions on catalytic performance has not been reported yet. Herein, the anion regulated channel of LDHs blocked by carbonate (Car) was opened by controlling the suberate (Sub) intercalation, thus obtains a series of ZnAl-LDHs with different anions (carbonate, suberate, PMo12-XVX, X = 0, 1, 2, 3, 8). The photocatalytic performance test in pure water shows that Sub@ZnAl-LDH and PMo9V3@ZnAl-LDH improved the NH3 yield from 11.37 μmol·h-1·g-1cat of Car@ZnAl-LDH to 48.91 μmol·h-1·g-1cat and 89.16 μmol·h-1·g-1cat, respectively. The improvement of the performance was attributed to: 1) nitrogen is allowed to enter between LDH layers due to the expansion of the interlayer spacing; 2) the hydrophobic suberic acid intercalation suppresses the hydrogen evolution reaction; 3) the POM intercalation broadens of the light absorption range of LDH. In this paper, the photocatalytic properties of ZnAl-LDHs with different anion intercalated are explored and investigated for the first time, which provides a versatile strategy for enhancing the catalytic activity of LDHs in the photocatalytic nitrogen fixation reaction.

chemistry, inorganic & nuclear
Synthesis and characterization of Cd–Cr and Zn–Cd–Cr layered double hydroxides intercalated with dodecyl sulfate

Ying Guo,He Zhang,Lan Zhao,Guo-Dong Li,Jie-Sheng Chen,Lin Xu

DOI: https://doi.org/10.1016/j.jssc.2005.03.020

IF: 3.3

2005-01-01

Journal of Solid State Chemistry

Abstract:Cd–Cr and Zn–Cd–Cr layered double hydroxides (CdCr-LDH and ZnCdCr-LDH) containing alkyl sulfate as the interlamellar anion have been prepared through a coprecipitation technique. The resulting compounds were characterized using X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and scanning electron microscopy. Magnetic property measurements indicate that antiferromagnetic interactions occur between the chromium ions in the two compounds at low temperatures. The introduction of zinc influences the ligand field of CrIII and the CrIII–CrIII interactions in the LDH compound. It is found that both CdCr-LDH and ZnCdCr-LDH can be delaminated by dispersion in formamide, leading to translucent and stable colloidal solutions.

Preparation and Applications of Intercalated ZnAl-LDHs

Morphologies, Preparations and Applications of Layered Double Hydroxide Micro-/Nanostructures

Three-dimensional layered double hydroxide membranes: fabrication technique, growth mechanism, and enhanced photocatalytic activity.

Progress in Supramolecular Intercalation and Assembly of Organic Anion Pillared Layered Double Hydroxides

Preparation and Wettability of Zn–Al Layered Double Hydroxide Film Directly Grown on Highly Porous Anodic Alumina Oxide Template

Highly atom-economic synthesis and scale-up production of zinc-aluminum layered double hydroxides

Preparation and application of layered double hydroxide nanosheets

Advanced Exfoliation Strategies for Layered Double Hydroxides and Applications in Energy Conversion and Storage

Dispersive Behaviors of Organic Anion Intercalated Layered Double Hydroxides in Organic Solvents

Long-Range and Short-Range Structures of Multimetallic Layered Double Hydroxides

Structural features and dynamic behaviour of the interlayer space of layered double hydroxide coatings

Contribution of Sodium Dodecyl Sulphate and Sodium Lauric Acid in the One-Pot Synthesis of Intercalated ZnAl-layered Double Hydroxides

Transition Metal Based Layered Double Hydroxides Tailored for Energy Conversion and Storage

Construction of ZnAl LDH-Derived Sulfides with Etching Modification to Trigger Photocatalytic H 2 Production and Degradation Oxidation

Fabrication of zinc-aluminum layer double hydroxide thin films and their anionic adsorption performance

A Green Route for the Preparation of Layered Double Hydroxides from Basic Magnesium Carbonate

Facile assembly for fast construction of intercalation hybrids of layered double hydroxides with anionic metalloporphyrin.

Facile Synthesis of ZnAl-layered Double Hydroxide Microspheres with Core–shell Structure and Their Enhanced Adsorption Capability

In-situ Observation of the Growth Behavior of ZnAl Layered Double Hydroxide Film Using EQCM

Enhancement the properties of ZnAl-LDH for photocatalytic nitrogen reduction reaction by controlling anion intercalation

Synthesis and characterization of Cd–Cr and Zn–Cd–Cr layered double hydroxides intercalated with dodecyl sulfate