Abstract:The dc-dc topologies with capacitive output filter are going to be widely used especially for high-output current applications because of its inherent advantages in the lower voltage stress on rectifiers and the smaller occupied printed circuit board layout area at the secondary side. However, the parasitic resonance between the equivalent leakage inductance of the power transformer and the equivalent output junction capacitance of the rectifier still practically exists in the center-tapped rectification configuration, which leads to considerable voltage ringing on the rectifier and then results in the utilization of the rectifier with much higher breakdown voltage rate and the decrease of conversion efficiency. Moreover, the relatively larger output-current ripple induces the both larger conduction loss in the secondary-side windings of the power transformer and the capacitive output filter. In this paper, a novel symmetrical rectifier configuration is proposed, which can effectively clamp the practical voltage stress on the rectifier without any parasitical voltage spike and reduce the output-current ripple due to the bypass effect of the auxiliary flying-balancing capacitors. The leakage inductance and the output filter capacitor can be treated as an inherent small LC filter to reduce the output voltage ripple further. Based on the theoretical analysis and the optimal design considerations, a 300-W lab-made LLC resonant dc-dc converter with this proposed configuration is built up to verify its advantages in high conversion efficiency.

A Novel Topology for Ripple-Free Inputting Current Techniques

Improved topology of boost converter with ripple free input current

A Zero-Voltage Zero-Current Soft Switching DC/DC Converter

A Novel L-S/N Compensation Topology for Inductive Power Transfer Systems with Constant Current Outputs and a Compact Receiver

Evaluation of Output Filter Capacitor Current Ripples in Single Phase PFC Converters

Topology Derivation of Transformerless Inverter Without Leakage Current Based on Graph Theory

Study of Interleave DC/DC Converter in Energy Feedback Electronic Power Load

Design of Input Filter for DC/DC Converter

Novel Topology of Resonant Circuit for Induction Heating

A Novel Symmetrical Rectifier Configuration with Low Voltage Stress and Ultralow Output-Current Ripple

A Hybrid Push-Pull Converter with Series-Parallel Structure in the Primary Windings

A Novel Circuit of Power Converters Applied to EV Wireless Charging System

Input Current Ripple Reduction of Switching Capacitor Converter by Dividing the Output Capacitor

An Input and Output Ripple Free Converter with a Four-Winding Coupled Inductor

Integrated High- and Low-Frequency Current Ripple Suppressions in a Single-Phase Onboard Charger for EVs

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

Input current ripple reduction of DC/DC converters

Research on A Novel Three-Phase Single-Stage Boost Dcm Pfc Topology and the Dead Zone of Its Input Current

A Novel Control Strategy for Input-Parallel-output-series Inverter System

A Novel Topology of Constant-Current ZVS Class E Inverter Designed Based on Frequency-Domain Method

Application of Improved LCL Filter Topology in Active Power Filter