Conversion of N-Octane over Modified Nano-crystallite ZSM-5 Catalyst
Zhang Pei-Qing,Guo Hong-Chen,Wang Xiang-Sheng,Guo Xin-Wen
DOI: https://doi.org/10.3321/j.issn:0251-0790.2006.05.028
2006-01-01
Abstract:By combining alkaline medium hydrothermal treatment with loading mixed rare earth oxide, zinc oxide( or gallium oxide) on nanoscale ZSM-5 (20-50 nm) as the active component, respectively, the modified nanoscale ZSM-5 catalysts were prepared, and characterized by TEM, XRF, IR, XRD and so on. The aromatization and isomerization of n-octane were used as the model reactions. The effects of the total acid amount, the acid strength distribution and the molar ratio of L to B acid sites on performance of aromatization and isomenization of the modified nanoscale HZSM-5 catalysts were investigated, and the relationship between acid strength and molar ratio of L to B acid sites and coking was also studied. The results indicate that the decrease of the total acid amount and the reduction of acid strength of the nanoscale HZSM-5 catalysts modified by combining alkaline medium hydrothermal treatment with loading mixed rare earth oxide resulted in weakening aromatization activity, strengthening isomerization activity and improving stability obviously. On the basis of the alkaline medium hydrothermal treatment and loading mixed rare earth oxide, the acid properties of the nanoscale HZSM-5. catalyst were regulated again after loading proper amount of zinc oxide( or gallium oxide), as a result, the total acid amount of catalysts increased, stronger acid sites of the catalysts decreased, the Bronsted acid sites of the catalyst decreased lightly, the Lewis acid sites of the-catalyst increased obviously and the molar ratio of L to B acid sites of the catalyst increased. The proper molar ratio of L to B (1.4-1.7) and the synergistic action between Lewis acid sites and Bronsted acid sites made the catalysts have a stronger and more stable aromatization and isomenization activity, the rate of coking of the catalyst declined. The yields of aromatics and iso-paraffins in the products over the combining modification nano-scale HZSM-5 catalysts reached about 50% and 30%, respectively, the selectivity of the alkyl-aromatics (mainly C-7-C-9) and isoparaffins (mainly C-4-C-6) with a high Octane Number attained 84% and 80%, respectively.