Abstract:Atomic structure is a crucial part for the structure–property relations in fabrication and utilization of nanoscale particles. Different from the widely known one-layer core–shell model in crystalline nanoparticles, we report here a multilayer atomic structure formed in metallic glass nanoparticles. The multilayers are characterized by density modulations along the radial direction, while the underlying atomic structure still remains amorphous. As an example, the Cu64Zr36 metallic glass nanospheres are investigated under a wide range of temperatures and sizes using molecular dynamics simulation. We found that the homogeneous amorphous structure undergoes a transition from a single surface core–shell structure to a multilayer structure with a well-defined one-dimensional periodicity when the particles are cooled through the glass transition. This unique layered atomic packing is closely correlated to the variation of the internal stress induced by the surface stress. The layered structure is also accompanied by the property modulation as well as chemical segregation on surface regions. Metallic glasses (MGs) are considered as homogeneous and disordered without any long-range atomic packing. Here, we report the development of the onion-like, multilayered atomic structure with a one-dimensional spherical periodic order along the radial direction in MG spheres. The layering transition occurs spontaneously as driven by the surface tension at all ranges of temperatures below the glass-transition temperature. The ordering depends on the radius of the spheres, ranging from a few atomic layers in the large spheres to fully ordered in the smaller ones. The ordering phenomenon is a rare demonstration of the liquid-like behavior in the amorphous solid that blurs the boundary between the solid and liquid in nanoscales. In particular, the multilayered structure could be used in developing functional catalysts and friction or wear-resistant materials. The formation of the multlayers in MG nanoparticles is measured by the mass density profiles along the radial direction. The one-dimensional ordering depends on the radius of the spheres, ranging from a few atomic layers in the large spheres to fully ordered in the smaller ones. The mass-density profiles, ρ(r), for the MG spheres with a radius of (a) r = 20 Å, (b) 40 Å, (c) 60 Å, and (d) 120 Å at 700 K. The black squares denote the total density, the filled red up-pointing and blue down-pointing triangles are for Cu and Zr. (e) The atomic configuration of a MG sphere in different views from the cross-sections inside the sphere (A) and the surface (B). More detailed local atomic packing from the cross-section area A and the surface area B shows (partial) ordering of the surface atoms with the triangular or hexagonal packing and one-dimensional ordering in the first few atomic layers along the radial direction. The locally ordered atoms are marked with broken white lines.

The surface structure of gas-atomized metallic glass powders

On the atomic structure of Zr–Ni and Zr–Ni–Al metallic glasses

Atomic-scale Heterogeneity in Large-Plasticity Cu-doped Metallic Glasses

High-temperature oxidation behavior of Cu64Zr36 metallic glass powders

Microstructural Assessment of the Oxidation Behavior of Cu-Based Metallic Glass Powder

Atomic Structure and Thermal Stability of Interfaces Between Metallic Glass and Embedding Nano-Crystallites Revealed by Molecular Dynamics Simulations

Atomic Structure in Al-Doped Multicomponent Bulk Metallic Glass

Electronic structure of bulk metallic glass Zr55Al10Cu30Ni5

Formation of multilayer structure in metallic glass nanospheres

Microstructure and crystallization in Cu50Zr45Al5 metallic glass

Microstructure and Mechanical Properties of Porous Zr55Cu30Al10Ni5 Bulk Metallic Glass Fabricated by Spark Plasma Sintering Process

Formation and mechanical properties of Cu_(58)Zr_(20)Ti_(20)Mo_2 bulk metallic glass

Formation and mechanical properties of bulk Cu-Ti-Zr-Ni metallic glasses with high glass forming ability

Synthesis of Bulk Zr48Cu36Al8Ag8 Metallic Glass by Hot Pressing of Amorphous Powders

Cooling Rate Effects on the Microstructure and Phase Formation in Zr51Cu20.7Ni12Al16.3bulk Metallic Glass

Oxidation Kinetic and Diffusion Mechanism Study of A Zr- Based Bulk Metallic Glass Alloy

Influence of Spark Plasma Sintering Parameters on the Mechanical Properties of Cu50Zr45Al5 Bulk Metallic Glass Obtained Using Metallic Glass Powder

Surface structure and properties of NiZr model metallic glasses: A molecular dynamics simulation

Glass formation, chemical properties and surface analysis of Cu-based bulk metallic glasses

Porous Bulk Metallic Glass Produced By Spark Plasma Sintering Of Gas Atomized Zr55cu30al10ni5 Glassy Powders

Cooling rate effects on the microstructure and phase formation in Zr51Cu20.7Ni12Al16.3 bulk metallic glass