Abstract:A series of activated carbon used as supports were pretreated with different concentrations of HNO3. Pd/C catalysts were then prepared by impregnation using H2PdCl4 solution as the Pd precursor. The results of adsorption experiments in the impregnation process indicated that the equilibrium uptake of the Pd precursor on the surface of activated carbon decreased with increasing HNO3 concentration for the pretreatment. When undiluted HNO3 was used,only 62.54% of Pd precursor was adsorbed on the surface of activated carbon,and about 37.46% of Pd precursor was still reserved in the slurry. The Pd precursor equilibrium uptake was highly dependent upon the point-of-zero charge of the activated carbon. Compared with the surface oxygen anchoring mechanism,the surface charge model gives a better explanation of the adsorption experimental results. Pd particle size was initially decreased with increasing HNO3 concentration (≤5%) and then increased with further increasing HNO3 concentration (10%). No obvious correlation between the Pd precursor equilibrium uptake and the Pd particle size was found because the particle size of Pd was also affected by Pd precursor adsorption species and their amounts. Formation of PdCly-x adsorption species was inhibited by the increase of oxygen-containing groups on the activated carbon surface. When a low HNO3 concentration (≤5%) was used for the pretreatment of activated carbon,PdCly-x and Pd0 were the main adsorption states of Pd precursor,whereas when the HNO3 concentration was high (5%),PdCly-x was not detected.

Effect of precursors on carbon supported platinum nano-catalyst

Preparation and Characterization of the Carbon Nano Tubes Supporting Oxygen Electrode Material for PEMFC

Equilibrium Uptake and Adsorption State of Pd Precursor in Preparation of Pd/C Catalyst by Impregnation

Preparation of Pt Nanocatalyst on Carbon Materials via a Reduction Reaction of a Pt Precursor in a Drying Process

Preparation and characterization of Pt/C cathode catalysts for direct methanol fuel cells effect of different preparation and treatment methods

Carbon-supported Pt nanoparticles as catalysts for proton exchange membrane fuel cells

Synthesis of a Pt/C Electrocatalyst from a User-Friendly Pt Precursor (Ammonium Hexachloroplatinate) through Microwave-Assisted Polyol Synthesis

Effect of Precursor Status on the Transition from Complex to Carbon Shell in a Platinum Core-Carbon Shell Catalyst.

Synthesis and Property of Platinum-cobalt Alloy Nano Catalyst

A comparative evaluation of palladium and platinum nanoparticles as catalysts in proton exchange membrane electrochemical cells

Method for preparing highly dispersed Pt catalysts on mesoporous carbon support

Synthesis of small-sized intermetallic PtCo fuel cell catalysts by promoting inner surface utilization of carbon supports

Preparation and Performance of Ni Nano-particle Doping with Pt for Methanol Electrocatalytic Oxidation

Processes of Depositing Platinum on Carbon Nanotubes and Their Effecton Performance of Proton Exchange Membrane Fuel Cell

Study on Platinum and Copper Nanosheets Alloys Supported on Mesoporous Titanium Dioxide Doped with Carbon Black As Electrocatalysts in Pem Fuel Cells

Effect of Nitrogen-Containing Functionalization on the Electrocatalytic Activity of Ptru Nanoparticles Supported on Carbon Nanotubes for Direct Methanol Fuel Cells

Effect of mesoporous carbon on oxygen reduction reaction activity as cathode catalyst support for proton exchange membrane fuel cell

Highly dispersed ultrafine PtCo alloy nanoparticles on unique composite carbon supports for proton exchange membrane fuel cells

Effect of palladium precursor on the performance of nanorods CeO2-supported palladium catalyst for toluene catalytic combustion

Controllable Porous Nanogrids of Chromium Nitride with Strong Metal–Support Interactions for Achieving Stable Oxygen Reduction Reaction

Preparation of Pt-Catalyst by Poly(p-phenylenediamine) Nanocomposites Assisted by Microwave Radiation for Proton Exchange Membrane Fuel Cell