Abstract:The mould foot roller is a key component of a continuous casting machine. In order to investigate the possibility of using laser cladding to repair mould foot roller, Fe-based powders and 42CrMo steel are used in this work. The laser cladding process parameters were optimized by orthogonal experiments. The chemical compositions, microstructure, properties of the cladding layer under the optimum process parameters, and substrate were systematically investigated by using optical microscopy (OM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), microhardness test, wear test, and salt spray corrosion test. The results indicate that the primary factor affecting the width and depth of the cladding layer is laser power. The scanning speed also has a significant effect on the height of the cladding layer. The optimum process parameters for repairing the mould foot roller are 2 kW laser power, 4 mm/s scanning speed, and 15 g/min feeding rate of powder. Along the depth direction of the cladding layer, the microstructure of the coating gradually transforms from plane crystal, cell grains, or dendrites to equiaxed grains. The matrix is mainly martensite with retained austenite; the eutectic phase is composed of netlike M₂B, particulate M23(C,B)₆, and M₇(C,B)₃ phase. The hardness of the cladding layer is significantly improved, about three times that of the substrate. The weight loss of the cladding layer is just half that of the substrate. Its wear resistance and corrosion resistance have been significantly improved. The work period of the laser cladding-repaired foot roller is much longer than for the surfacing welding-repaired one. In summary, laser cladding technology can increase the life of mould foot rollers.

Flexible Fiber Coupled Laser Cladding Process Research

Laser Surface Cladding: the State of the Art and Challenges

Formation quality optimization of laser hot wire cladding for repairing martensite precipitation hardening stainless steel

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Status of Research on Assisted Laser Cladding and Laser Cladding Posttreatment: A Review

Quantitative analysis and experimental study of the influence of process parameters on the evolution of laser cladding

The Forming Control Method of Multi-Track Laser Cladding on Curved Surface

Application of Laser Cladding Reparations

Multi-objective Numerical Simulation of Geometrical Characteristics of Laser Cladding of Cobalt-Based Alloy Based on Response Surface Methodology

Optimization of Process Parameters, Microstructure, and Properties of Laser Cladding Fe-Based Alloy on 42CrMo Steel Roller

Experimental Research and Engineering Application of Laser Cladding Reparations

A review of recent advances in integrated laser remelting and laser cladding processes

Process optimization of laser hot-wire cladding with high-power direct diode laser via the response surface methodology

An analytical model of bead morphology on the inclined substrate in coaxial laser cladding

Research status of the transition layer on laser cladding

The application of laser cladding technology in mechanical repair work

Basic Experimental Researches On Repairing Technology of Laser Cladding

Modeling and Optimization of Laser Cladding Fixation Process for Optical Fiber Sensors in Harsh Environments

Finite Element Numerical Simulation and Repair Process of Laser Cladding Repair of Surface Cracks on Mechanical Parts

Recent research and development status of laser cladding: A review

Research progress and Prospect of Laser Cladding Technology