Abstract:An optical switch based on a scanning mirror was designed in this paper. The optical switch is pro-grammable and controlled by an embedded Linux system that switches between the fiber array channels onthe UI of the touch display. Meanwhile, the switching sequence and residence time of the optical switch canbe preset. In addition, the optical switch can be self-calibrated to obtain the maximum output power of eachchannel. The principle of the optical switch is analyzed and the performance of the optical switch is tested ex-perimentally. The experimental results show that the average insertion loss is less than 17 dB for the singlemode fiber array, the average crosstalk between adjacent channels is more than 30 dB, and the switching time between the adjacent channel is less than 1.3 ms. The average insertion loss is less than 2.4 dB for the multi-mode fiber array. It has the advantages of low loss, low delay, high precision, good stability, high repeatabil-ity, low cross-talk between the adjacent channel, and good man-machine interaction for the application of theWavelength Division Multiplexing (WDM) and multi-channel optical waveguide sensors test device

Properties of an Optical Time-Division Demultiplexing Module Using Serialized Nonlinear Optical Loop Mirrors

All-optical Demultiplexing of 8X2.5-Gb/s Pseudorandom OTDM Data Stream Using Nonlinear Optical Loop Mirror

Optical demultiplexing from 8×2.5 Gb/s to 2.5 Gb/s by using optical loop mirror and measurement on its bit error rate

Multi-channel Optical Switching Based on Scanning Mirror Instrumentation

A Behavior Description and Simulation of an Optical Bit-Interleaving Time-Division Multiplexing System Using VHDL

2X2.5ghz Demultiplexer Using Nolm

Signal demultiplexing from an 8.2×2.5 Gb/s OTDM data stream using NOLM

Signal Demultiplexing from an 8.2× 2.5 Gb/s OTDM Data Stream Using NOLM: Demonstration and Bit Error Rate Measurement

Experimental demonstration of fast simultaneous wavelength switching and time demultiplexing using a nonlinear optical loop mirror

Theory and numerical analysis of higher order dispersion effects on ultra-high-speed nonlinear optical loop mirror demultiplexer

Single-Source Duplex High-Speed FSO Communications Using Electro-Optic Modulator-Based MRR

Optical Time-Division Demultiplexing Using a Time-Lens-Assisted Mach–Zehnder Modulator

Optical time division multiplexing demultiplexing of 4×2.5 GHz using SLALOM

8X2.5-Gb/s OTDM Data Demultiplexing Using an SLALOM

Experimental Demonstration Of All-Optical Time Division Demultiplexing In An Ultrafast Nonlinear Interferometer (Uni)

Demonstration Of A 16 X 10-Gb/S Otdm System

Experimental Study on a 4-B Serial Optical Digital to Analog Convertor

Novel Scheme of OADM Based on WDM Demultiplexer, Switch Array, and OLM

Reconfigurable WDM-PON Empowered by a Low-Cost 8-Channel Directly Modulated Laser Module

Polarization-Independent Otdm Demultiplexer Based On A Nolm With A Polarization Diversity Loop

Investigation Of Optical Clock Division And Demultiplexing Based On A Commercial Lithium Niobate-Intensity Modulator