Abstract:In an effort to find more cost‐effective and proactive ways to keep bridges in good condition, the use of instrumented vehicles has gained great interest in the last decade. Two bridge components that can wear rapidly are the bearings and the road surface. However, past research on drive‐by monitoring has placed focus mostly on detecting losses of bending stiffness in the bridge deck, while assuming ideal support conditions that may differ from real cases significantly, and ignoring the characterization of the road profile. Even further, the need for specialized vehicles equipped with high‐tech instrumentation, low speeds, or very good road profiles has been a major obstacle preventing its practical implementation. This paper investigates the use of axle accelerations from an ordinary two‐axle vehicle crossing the bridge to quantify the rotational stiffness of the supports and the height of the road irregularities while overcoming the limitations exposed above. In contrast to previous research where the response of the contact point has been derived from other vehicular locations based on complex differential equations of motion, transfer functions are employed here. The key advantage of transfer functions is their simple algebraic form that can be easily calibrated on the field. The road profile is then obtained by subtracting the displacement of the bridge under each axle from the displacement of the contact point. There is one prediction of the road profile per axle but only a unique value of rotational stiffness at each support that will yield the same prediction by both axles. The algorithm is successfully tested with a half‐car traveling at 5, 10, 15, and 20 m/s, over a 15‐m bridge beam model with ISO road classes "A," "B," and "C," for boundary conditions ranging from simply supported to fixed. The solution's robustness to modeling inaccuracies and noisy data is also investigated.

NON-STATIONARY RANDOM VIBRATION OF BRIDGES UNDER VEHICLES WITH VARIABLE SPEED

Dynamical Behavior of Steel Box Girder Bridges Due to Vehicle-Induced Vibration at Expansion Joint

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Vertical Vibration of Complex and Slender Footbridges Due to Stochastic Crowd-Induced Excitation

FEM analysis of vehicle-bridge vibration considering bridge deck's vibration

Theoretical analysis of low-frequency noise radiated from bridge vibrations

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Frequency-domain method for non-stationary stochastic vibrations of train-bridge coupled system with time-varying characteristics

Random Vibration Analysis of a Vehicle–Bridge Interaction System Subjected to Traveling Seismic Ground Motions Using Pseudo-excitation Method

Vibration Analysis of Bridge Subjected to a Moving Elastic Vehicle Ith Flexible Connections

Random analysis of coupled vehicle–bridge systems with local nonlinearities based on explicit time-domain method

Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

Nonlinear Dynamic Analysis of Multi-vehicle Vehicle-bridge Coupling System

Dynamic Analysis and Optimization of Vehicle-Bridge Interaction System under Road Roughness and Time Variability of Element Interpolation Function

Nonstationary Random Vibration Performance of Train-Bridge Coupling System with Vertical Track Irregularity

Dynamic response analysis of cable-stayed bridge under random traffic flow and fleet

Dynamic Behavior of Damaged Bridge with Multi-Cracks Under Moving Vehicular Loads

Analysis of Dynamic Behavior for Ballastless Track-Bridge with a Hybrid Method

Dynamic research on higih-pier & long-span continuous rigid frame bridge from overload vehicle

Characterization of the road profile and the rotational stiffness of supports in a bridge based on axle accelerations of a crossing vehicle