Abstract:The premise of vehicle intelligent decision making is to obtain vehicle motion state parameters accurately and in real-time. Several state parameters cannot be measured directly by vehicle sensors, so estimation algorithms based on filtering are effective solutions. The most representative algorithm is the Kalman filter, especially the standard unscented Kalman filter (UKF) that has been widely used in vehicle state estimation because of its superiority in dealing with nonlinear filtering problems. However, although the UKF assumes that the noise statistics of the system are known, due to the complex and changeable operating conditions, sensor aging and other factors, these noises vary. In order to realize high-precision vehicle state estimation, a noise-adaptive UKF algorithm is proposed in this article. The maximum a posteriori (MAP) algorithm is used to dynamically update the noise of the vehicle system, and it is embedded into the update step of the UKF to form an adaptive unscented Kalman filter (AUKF). The system will dynamically update the noise when noise statistics are unknown and prevent filter divergence by adjusting the mean and covariance of the estimated noise to improve accuracy. On this basis, the proposed method is verified by the joint simulation of CarSim and Matlab/Simulink, confirming that the AUKF performs better than the standard UKF in estimation accuracy and stability under different degrees of noise disturbance, and the estimation accuracy for the yaw rate, side slip angle and longitudinal velocity is improved by 20.08%, 40.98% and 89.91%, respectively.

Review of Vehicle State Estimation Problem under Driving Situation

Review on Vehicle Sideslip Angle Estimation

Real-time Joint Traffic State and Model Parameter Estimation on Freeways with Fixed Sensors and Connected Vehicles: State-of-the-art Overview, Methods, and Case Studies

Advanced Estimation Techniques for Vehicle System Dynamic State: A Survey

State Estimation for 4WD Vehicle Based on Information of Tyre Force Sensor

A Review on Vehicle-Trailer State and Parameter Estimation

Vehicle State Estimation Based on V2 I System

DGPS-Based Vehicle State Estimation in V2I Cooperative System

State Estimation of Drive-by-Wire Chassis Vehicle Based on Dual Unscented Particle Filter Algorithm

A Robust Hierarchical Estimation Scheme for Vehicle State Based on Maximum Correntropy Square-Root Cubature Kalman Filter

State Parameter Estimation of Intelligent Vehicles Based on an Adaptive Unscented Kalman Filter

Vehicle state and parameter estimation based on double cubature Kalman filter algorithm

Adaptive Estimation of Vehicle Sideslip Angle under Multi-status

Adaptive Estimations of Tyre–road Friction Coefficient and Body’s Sideslip Angle Based on Strong Tracking and Interactive Multiple Model Theories

Vehicle State Estimation Using Interacting Multiple Model Based on Square Root Cubature Kalman Filter

Real-Time Estimation Of Vehicle'S Lateral Dynamics At Inclined Road Employing Extended Kalman Filter

Learning-Based Vehicle State Estimation Using Gaussian Process Regression Combined with Extended Kalman Filter

An adaptive estimation of ground vehicle state with unknown measurement noise

Review and Outlook of Modeling of Car Following Behavior

Vehicle sideslip angle estimation for a four-wheel-independent-drive electric vehicle based on a hybrid estimator and a moving polynomial Kalman smoother