Abstract:The TiSiN/Ag multilayer coatings deposited on Ti6A14V alloy substrate using the multi -arc ion plating system. All multilayer coatings had a same total thickness of about 2.5 mu m, and the TiSiN layer had a fixed thickness and the Ag layer had different thicknesses. Evidence concluded from X-ray diffraction, scanning electron microcopies, X-ray photoelectron spectroscopy revealed that nanocrystallites and amorphous microstructure of nc-TiN and amorphous Si-3 N-4 for individual TiSiN layers, where amorphous Si3N4 around nanocrystallites TiN boundaries, and ductile nanocrystallites silver clusters and metallic silver for individual Ag layers which can limit continuous growth of single (200) preferential orientation coarse columnar TiN crystal. In addition, the TiN grain size presented a decreasing trend with the decrease of the thickness of Ag layers. The TiSiN/Ag multilayer coatings showed a significantly improved toughness compared with the TiSiN coating. The individual Ag layers of nano-multilayer coatings, not only as a self-lubricating but also as a barrier which inhibited micro cracks propagation, the formation of threading defects throughout all coatings, cause energy dissipation by passing through the interface zones without making the coating fail and at the same time prevented the aggressive seawater through the micro-pores. Moreover, improved toughness, excellent wear resistance together with high hardness, H/E and H-3/E-*2 values were found for the TiSiN/Ag multilayer coating with the individual Ag layers of 22.22 nm. (C) 2016 Elsevier B.V. All rights reserved.

Simulation of nacre with TiC/metal multilayers and a study of their toughness

TiC/metal Nacrous Structures and Their Fracture Toughness Increase

Simulation of Nacre with Tic/Teflon Multilayers and A Study of Their Properties

Damage-Tolerance Strategies for Nacre Tablets

Fabrication and Characterisation of Alumina/aluminium Composite Materials with a Nacre-Like Micro-Layered Architecture

Biomimetic Research Based on the Study of Nacre Structure

Experimental Observations on the Mechanical Properties of Nanoscale Ceramic/teflon Multilayers

Structural, Interface Texture and Toughness of TiAlN/CNx Multilayer Films

Effect of Multi-Interfacial Structure on Fracture Resistance of Composite TiSiN/Ag/TiSiN Multilayer Coating

Mechanical properties of TiC/metal multilayers synthesized by ion beam sputtering technique

Effects of modulation layer thickness on fracture toughness of a TiN/AlN-Ni multilayer film

Micro-Assembling of Carbide/Metal by Ion-Beam Sputtering Process

Nano-indentation Study on the Mechanical Properties of TiC/Mo Multilayers Deposited by Ion Beam Assisted Deposition

Structure, Mechanical and Tribological Properties of Self-Toughening TiSiN/Ag Multilayer Coatings on Ti6Al4V Prepared by Arc Ion Plating

Liquid crystal self-templating approach to ultrastrong and tough biomimic composites

Discontinuous crack-bridging model for fracture toughness analysis of nacre

Conch‐Shell‐Inspired Tough Ceramic

Optimization of the microstructure, mechanical properties, and wear resistance of nacre-inspired TiB2/Al-Cu composites via gelatin addition

Synthesis of damage-tolerant Cu-matrix composites with nacre-inspired laminate-reticular hierarchical architecture via tuning compositional wettability

Failure progression and toughening mechanism of 3D-printed nacre-like structures under in-plane compression

Mechanical properties of nanoscaled TiC/Fe multilayers deposited by ion beam sputtering technique