Abstract:Accurate and robust calibration is crucial to a multisensor fusion-based system. The calibration of heterogeneous sensors is particularly challenging because of the huge difference of the captured sensor data. On the other hand, many calibration approaches ignore temporal calibration that is in fact as important as spatial calibration. In this article, we focus on the temporal calibration of heterogeneous sensors, and the corresponding extrinsic rotation is also derived. Most existing methods are specialized for a certain sensor combination, such as an inertial measurement unit (IMU) camera or a camera-Lidar system. However, heterogeneous multisensor fusion is a tendency in the robotics area, so a unified calibration method is desired. To this end, we leverage the 3-D rotational motion feature for calibration, and auxiliary calibration boards are not needed since multiple odometry methods are available to capture 3-D sensor motion. Using a high-frequency IMU as the calibration reference, an IMU-centric scheme is designed to achieve a unified framework that adapts to various target sensors that can independently estimate 3-D rotational motion. By combining independent IMU-centric calibration pairs, an arbitrary pair of sensors can also be calibrated using the same reference IMU. Due to a novel 3-D motion correlation quantification and analysis mechanism, the temporal offset can be first estimated in real time. Given temporally aligned sensor motion, the extrinsic rotation can be derived in closed-form in the same 3-D motion correlation mechanism. Experimental results of certain sensor combinations show the accuracy and robustness of the proposed method through comparison with state-of-the-art calibration approaches, and the calibration result of a heterogeneous multisensor set demonstrates the scalability and versatility of our method.

Sensor Fusion Methodology to Overcome Cross-Axis Problem for Micromachined Thermal Gas Inertial Sensor

A Study of Cross-axis Effect for Micromachined Thermal Gas Inertial Sensor

A Micromachined Gas Inertial Sensor Based on Thermal Expansion

Micromachined Gas Inertial Sensor Based on Convection Heat Transfer

Modeling And Experimental Study On Characterization Of Micromachined Thermal Gas Inertial Sensors

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

A micromachined integrated gyroscope and accelerometer based on gas thermal expansion

Micromachined Fluid Inertial Sensors

A Temperature Compensation Method For Micromachined Thermal Gas Gyroscope

System Error Compensation Methodology Based on a Neural Network for a Micromachined Inertial Measurement Unit

Transverse Sensitivity Suppression Using Multi-Axis Surface Encoder with Parasitic Error Compensation

Design And Modeling Of Micromachined Thermal Convective Gyroscope With Bidirectional Jets

Design of Micromachined Thermal Expansion Gas Gyroscope Signal Detection Circuit

A Novel Tri-Axial MEMS Gyroscope Calibration Method over a Full Temperature Range

Design of Digital Micromachined Thermal Gas Gyroscope

Analysis on Shock Resistance of Micromachined Angular Rate Sensor Based on Convection Heat Transfer

A Novel Method and System Implementation for Precise Estimation of Single-Axis Rotational Angles

A Continuous Dual-Axis Atomic Interferometric Inertial Sensor

Experiments and simulations of MEMS thermal sensors for wall shear-stress measurements in aerodynamic control applications

Real-Time Temporal and Rotational Calibration of Heterogeneous Sensors Using Motion Correlation Analysis

Real-Time Dynamic Data Processing and Fusion: Multi-Degree-of-Freedom MEMS Inertial Sensors