Abstract:Deep shale gas formations with a burial depth larger than 3500 m contain over 65% of the total shale gas reserves in the Southern Sichuan Basin. However, complex reservoir conditions, such as extensively developed natural fractures or faults and large horizontal principal stress differences, generate significant uncertainties in post-fracturing well performance. Quick estimation of hydraulic fracture properties, such as the fracture surface area and effective half-length, via pressure falloff data, after the main fracturing treatment offers a timely and improved understanding of stimulation efficiency and provides key information for post-frac well performance investigation. In this study, we comprehensively investigate fracture properties of different fractured stages, such as main fracture surface area, secondary fracture surface area, and effective main fracture half-length. Then, we analyze the correlation of these properties, productivity, pressure falloff data, and fracturing treatment parameters via a case study. Here, we employ the basic pressure-falloff-based approach of Liu et al. (2020) and further add the impact fracture tortuosity. First, collect high-quality pressure falloff data and generate the log-log diagnostic plot of pressure drop and the corresponding derivative for each stage. Then, generate the composite G-function plot for each stage and find the d(∆p)/dG value when the first closure of the hydraulic fracture occurs. Next, determine the pressure loss caused by the wellbore and near-wellbore fracture tortuosity and calculate the fracture tortuosity. Finally, calculate the main fracture and secondary fracture properties. Well A, a deep shale gas well in the Southern Sichuan Basin, is selected and analyzed. The effective main fracture half-length of well A ranges from 279 ft to 395 ft, depending on the operating and reservoir conditions. Compared with microseismic data, the average main fracture effective half-length is 54.7% of the observed average SRV half-length. The relative magnitude of pressure loss during the pressure falloff period caused by near-wellbore fracture tortuosity can roughly reflect the complexity of the created fracture system. A new fracture complexity evaluation concept is proposed based on the surface area values of main and secondary fractures. For fractured stages, the total pressure drop is positively correlated with the total fracture surface area of the fracture system and total injected fluid volume. The correlation between fracture surface area and gas productivity is weaker compared with that between fracture surface area and water productivity. Some discrepancies in specific stages are possibly caused by abnormal or poor-quality pressure falloff data. By combining other key information on field treatments, the understanding obtained from fracture surface area estimation helps to define changes in treatment design and enhance well productivity. This integrated approach can also serve as a simple but practical tool for estimating hydraulic fracture properties during offshore fracturing.

Calculation of Micro-hole Collapse Pressure in Gas Shale

Modelling of Time-Dependent Wellbore Collapse in Hard Brittle Shale Formation under Underbalanced Drilling Condition

Study of the Wellbore Instability Mechanism of Shale in the Jidong Oilfield under the Action of Fluid

Dynamic Pressure Analysis of Shale Gas Wells Considering Three-Dimensional Distribution and Properties of the Hydraulic Fracture Network

Study on Collapse Pressure Prediction of Fractured Strata

Twin Shear Unified Strength Solution of Shale Gas Reservoir Collapse Deformation in the Process of Shale Gas Exploitation

Study on plastic-brittleness mechanical properties and failure law of deep brittle shale under complex mechanical environment of wellbore

Pressure Analysis of Onshore and Offshore Shale Gas Reservoirs under Constant-Rate Condition Considering Thin Sandstone Layer and Interlayer Cross-Flow

Quick Hydraulic Fracture Property Estimation Through Pressure Falloff Data During Fracturing Operations: A Deep-Shale Case Study from the Southern Sichuan Basin

Micro-mechanism Analysis of Shale Gas Migration

Anisotropic failure behaviour and breakdown pressure interpretation of hydraulic fracturing experiments on shale

Rock mechanics and wellbore stability of deep shale during drilling and completion processes

Pore pressure prediction in orthotropic medium based on rock physics modeling of shale gas

Numerical Simulation of Hydraulic Fractures Breaking through Barriers in Shale Gas Reservoir in Well YS108-H3 in the Zhaotong Shale Gas Demonstration Area

Influence of the Weakening Effect of Drilling Fluid on Wellbore Stability in Anisotropic Shale Formation

Numerical Modeling of Natural Fracture Distributions in Shale

Quantitative Risk Assessment of Wellbore Collapse of Inclined Wells in Formations with Anisotropic Rock Strengths

Quantitative Study on the Anticollapse Ability of Casing in Shale Gas Wells under Complex Load Conditions

Well-Interference Characteristics of the Production of Shale Well Pads: A Case in the Southern Sichuan Basin

Laboratory study on casing deformation during multistage horizontal well fracturing in shale gas development and strain based casing design

Study of failure mechanism of bottom-hole rock mass approaching a gas-fractured zone during nitrogen drilling