Design of modular reconfigurable bionic robot

NIE Cheng-hui,LIU Li,CHEN Ken

DOI: https://doi.org/10.3969/j.issn.1001-3997.2009.02.003

2009-01-01

Abstract:Based on the application of bionic principle and topology theory,we have designed a set of modular reconfigurable bionic robot system.Such system can construct many kinds of leg-type robots,and as many of the parts are rechangeable,the cost is reduced to some content.

What problem does this paper attempt to address?

Modular Industrial Robot Based on Joint Modular

ZHAO Liang,YAN Hua-xiao,Y Jian-jiang

DOI: https://doi.org/10.3969/j.issn.1001-2265.2008.09.017

2008-01-01

Abstract:A novel modular industrial robot which is used for educational experiments was proposed on the basis of national and international industrial robot's study productions.It is consisted of two kinds of modules,vertical module and horizontal module.Different configuration's industrial robots were built by changing the sequence and the space positions of two kinds of modules based on an original mechanism.After the control strategy of each module was programmed,its control strategy could be formed by embedding the control strategy of each modular into the original one when a new modular industrial robot was re-built.Meanwhile,a touch screen was developed to realize the industrial robot's various control operations.The modular industrial robot which we designed has a great capability of self-repair and self-fault-tolerant.It solves the problem of limited working area of traditional industrial robot and increases industrial robot's application fields to a certain extent.
Configuration of Industrial Robots Based on Reconfigurable Modularization and Its Statics Analysis

LIU Shuang,YIN Guo-fu,LI Xue-qin,ZHOU Xiao-jun

DOI: https://doi.org/10.3969/j.issn.1001-3997.2011.11.080

2011-01-01

Abstract:Reconfigurable modular industrial robots is a new research direction arisen recently in robotics research field,which core and foundation is module division and module motion planning of the reconfigurable modular industrial robots.The characteristics of reconfigurable modular industrial robots are analyzed,and the division of the module of Industrial robots is introduced by taking the 50kg-loaded industrial robot as an instance,then each module of industrial robots is described in detail combining specific examples about the subject.Through 3D modeling based on solidworks combining structure performance analysis based on ANSYS,a 50kg-loaded industrial robot is constructed to realize reconfigurable of industrial robots
Structure design of service robot based on modular design method

Chang SHU,Rong XIONG,Zhou-dong FU

DOI: https://doi.org/10.3969/j.issn.1001-4551.2010.02.001

2010-01-01

Abstract:In order to reduce time and cost on service robot development,modular classification on structure was given out with the concept of modular design.Detailed exposition on the contents of transmission layout,transmission realization,body stability and modular structural design of robot was carried out.The results of the assembly and experiment on a sample robot indicate that the development cycle of the service robot based on modular design method is shortened,and its performance satisfies the requirement of the design.
Module-Based Method for Design and Analysis of Reconfigurable Parallel Robots

Fengfeng Xi,Yuwen Li,Hongbo Wang

DOI: https://doi.org/10.1007/s11465-011-0121-6

IF: 4.063

2011-01-01

Frontiers of Mechanical Engineering

Abstract:This paper presents a method for the design and analysis of reconfigurable parallel robots. The inherent modularity in a parallel robot lends itself as a natural candidate for reconfiguration. By taking the branches as building blocks, many modular parallel robots can be constructed, from which a reconfigurable parallel robot can be realized. Among three types of reconfigurations, namely, geometry morphing, topology morphing, and group morphing, the method presented here is for the last two reconfigurations, thereby advancing the current research that is mainly limited to geometry morphing. It is shown that the module-based method not only provides a systematic way of designing a reconfigurable parallel robot, but also offers a unified modeling for robot analysis. Two examples are provided, one showing the topology morphing and the other showing the group morphing.
Design, Fabrication, and Control Algorithm of Self-Reconfigurable Modular Intelligent Vehicles

Jing Zhou,Jiacheng Wang,Jiazhong He,Jian Gao,Aixi Yang,Sideng Hu,Qiang Li

DOI: https://doi.org/10.3390/app12146886

2022-01-01

Applied Sciences

Abstract:Self-reconfigurable vehicles are able to transform into new formations on the basis of mutual communication and positioning so as to adapt to a new environment and new tasks. Compared with fixed-formation vehicles, reconfigurable vehicles feature multifunction and high reliability. First, a modular vehicle with a Mecanum wheel is designed, and a motion control method of a modular vehicle is derived through the establishment and analysis of its kinematics model. Afterwards, a visual positioning system based on AprilTag is designed, and the reconfiguration experiment of modular vehicles is completed in order to validate the feasibility of the proposed control method. A hardware control platform is built, which is able to realize the omnidirectional movement of the vehicle in the plane. The proposed modular vehicles with the corresponding control method successfully completes centralized perception, trajectory planning, and self-reconfiguration, which can be potentially applied in various scenarios, such as orientation guidance and logistics handling.
Modular Reconfigurable Robotic System

Gt Zhao,Hj Zheng,Js Wang

2003-01-01

Abstract:Robots with a fixed architecture constitute an overwhelming majority of robot designs. These robots are usually intended to perform a single task and the architecture is designed accordingly. Although the single task may be extremely complicated, such as exploring the surface of Mars, a robot designed for that task will have difficulty performing a different task. To be successful in unknown or unstructured environments, robots need to be able to change their architecture to suit the environment and the task. In this paper we describe a class of robots which can change their shape and functionality to adapt the environment: modular reconfigurable robotic system.
Structure Design of Multi-joint Bionic Robot Based on Solidworks

KaiJie Xu,Rihe Wang,Yaping Lu

DOI: https://doi.org/10.1088/1755-1315/526/1/012165

2020-06-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract The body structure of the multi joint bionic robot is designed and analyzed. According to the movement form of snake and caterpillar, a multi joint bionic robot is designed and manufactured based on the principle of bionics. Using SolidWorks software to establish the model, there are three parts: head joint, body joint and tail joint. The bionic robot uses 3D technology to be printed and make a physical prototype, and experiment with the prototype. It can imitate the movement of snakes and caterpillars, and realize snake movement, insect movement, turning, curling, lurking and other movements. Through the structural design, processing and manufacturing of the multi joint bionic robot, the movement shape is analyzed and adjusted to make its movement attitude completely similar to the biological shape.
The Kinematics Analysis of A Novel Self-Reconfigurable Modular Robot Based on Screw Theory

Yuehua Li,Shiqiang Zhu,Zewen Wang,Luhan Zhang,Xutai Ma,Zhengzhe Cui

DOI: https://doi.org/10.12783/dtetr/mime2016/10196

2016-01-01

Abstract:This paper introduces our newly designed self-reconfigurable modular robot named Larva-Bot, which has two DOFs with intersecting rotation axis normal to each other. Each module has autonomous mobility, and can assemble with other modules to form various configurations. In this study, a typical 6-DOF structure, composed of Larva-Bots, is proposed to analyze the kinematic characteristics of the modular robot. The common kinematics model of the robot is based on the Denavit-Hartenberg (D-H) parameter method, while its inverse kinematics has inefficient calculation and complicated solutions. To solve the problems, the screw theory method is applied in this paper. The forward kinematics model is constructed by using the product of exponentials (POEs) formula, while the inverse kinematics analysis is based on Paden-Kahan Sub-problems. Finally, the reliability of the method has been proved by computations and simulation.
Bionic Multi-Legged Robots with Flexible Bodies: Design, Motion, and Control

Xiang Li,Zhe Suo,Dan Liu,Jianfeng Liu,Wenqing Tian,Jixin Wang,Jianhua Wang

DOI: https://doi.org/10.3390/biomimetics9100628

2024-10-15

Abstract:Bionic multi-legged robots with flexible bodies embody human ingenuity in imitating, learning, and exploring the natural world. In contrast to rigid-body robots, these robots with flexible bodies exhibit superior locomotive capabilities. The flexible body of the robot not only boosts the moving speed and walking stability but also enhances adaptability across complex terrains. This article focuses on the innovative design of flexible bodies. Firstly, the structural designs, including artificial spines and single/multi-axis articulation mechanisms, are outlined systematically. Secondly, the enhancement of robotic motion by flexible bodies is reviewed, examining the impact that body degrees of freedom, stiffness, and coordinated control between the body and limbs have on robotic motion. Thirdly, existing robotic control methods, organized by control architectures, are comprehensively overviewed in this article. Finally, the application prospects of bionic multi-legged robots with flexible bodies are offered, and the challenges that may arise in their future development are listed. This article aims to serve as a reference for bionic robot research.
Design and Control of a Robotic System with Legs, Wheels, and a Reconfigurable Arm

Linqi Ye,Houde Liu,Xueqian Wang,Bin Liang,Bo Yuan

DOI: https://doi.org/10.1049/csy2.12072

2022-01-01

IET Cyber-Systems and Robotics

Abstract:Abstract Unmanned robotic systems are expected to liberate people from heavy, monotonous, and dangerous work. However, it is still difficult for robots to work in complicated environments and handle diverse tasks. To this end, a robotic system with four legs, four wheels, and a reconfigurable arm is designed. Special attention has been given to making the robot compact, agile, and versatile. Firstly, by using separate wheels and legs, it removes the coupling in the traditional wheeled–legged system and guarantees highly efficient locomotion in both the wheeled and legged modes. Secondly, a leg–arm reconfiguration design is adopted to extend the manipulation capability of the system, which not only reduces the total weight but also allows for dexterous manipulation and multi‐limb cooperation. Thirdly, a multi‐task control strategy based on variable configurations is proposed for the system, which greatly enhances the adaptability of the robot to complicated environments. Experimental results are given, which validate the effectiveness of the system in mobility and operation capability.
Modular Design Method for Control of Reconfigurable Machine Tools

许虹,唐任仲,程耀东

DOI: https://doi.org/10.3785/j.issn.1008-973x.2004.01.002

2004-01-01

Abstract:A design method for constructing a hierarchical structure controller with control modules was proposed for synchronously reconfiguring the control and machine of reconfigurable machine tool(RMT). In this method,the entire controller and its individual control module at every level acted as a set consisting of a finite state machine (FSM) with input output event set pairs. Each pair of input output event set was defined as a port of the control module, and the input event set on a given port formed the port-acceptable language. Thus, when the mechanical modules are assembled, the control modules can be connected using port language, which constructs the higher control module until the entire controller is connected. Thereby, the control and machine reconfiguration of RMTs occurs synchronously. Based on the introduction of FSM expression for discrete event systems, the definitions of control module with FSM, module combination, as well as the design and construction theory of modular controller was given. Using this theory, once the control modules are properly designed and connected, the resulting controller is guaranteed to be controllable.
Review of Modular Self-Reconfigurable Robotic Systems

Bao Di,Wang Xueqian,Huang Hailin,Liang Bin

DOI: https://doi.org/10.2991/wartia-16.2016.350

2016-01-01

Abstract:Modular self-reconfigurable robotic system has been presented for more than 20 years. We will review the development of the system in this article. There are many categories of the system. Each category is introduced in detail in this article, and typical examples of each categories will be presented. We also present the key technologies of the system.
Design of a bionic snake-like robot

Xianyu Meng,Shuo Wang,Xiquan Yu,Songrui Zhao,Hongsheng Liu

DOI: https://doi.org/10.1117/12.2679732

2023-07-18

Abstract:Bionics is a subject that studies various excellent characteristics such as the structure, function and information control of organisms. These characteristics will give us a lot of inspiration in terms of mechanical design and will also provide new construction ideas for practical engineering applications. In this paper, based on the structural characteristics of the natural biological snake, a bionic snake-like robot with a meandering posture is designed. Bionic snake-like robot uses STM32F103ZET6 MCU and 16-way servo control board as the main control unit. The servo provides the driving force. Through the use of pulleys and various sensors, functions such as various attitude movements and real-time detection are realized. Using Solidworks software to carry out 3D modeling of the bionic snake-like robot and make a bionic snake-like robot model for experimental testing. The physical model size is 120mm*120mm*850mm. The results show that: on a relatively flat ground, the time for the bionic snake-like robot to move through a horizontal distance of 1m is about 5.50s. The bionic snake-like robot runs stably during the test and has no stuttering phenomenon.

Biology,Engineering
In Situ Reconfiguration of Assembling Pattern for Modular Continuum Robots

Jie Zhang,Jiannan Cai,Ke Ma,Jinzhao Yang,Zhigang Wu,Haijun Peng,Jianing Wu

DOI: https://doi.org/10.1007/s42235-024-00523-5

IF: 2.995

2024-05-16

Journal of Bionic Engineering

Abstract:Modular continuum robots possess significant versatility across various scenarios; however, conventional assembling methods typically rely on linear connection between modules. This limitation can impede the robotic interaction capabilities, especially in specific engineering applications. Herein, inspired by the assembling pattern between the femur and tibia in a human knee, we proposed a multidirectional assembling strategy. This strategy encompasses linear, oblique, and orthogonal connections, allowing a two-module continuum robot to undergo in-situ reconfiguration into three distinct initial configurations. To anticipate the final configuration resulting from diverse assembling patterns, we employed the positional formulation finite element framework to establish a mechanical model, and the theoretical results reveal that our customizable strategy can offer an effective route for robotic interactions. We showcased diverse assembling patterns for coping with interaction requirements. The experimental results indicate that our modular continuum robot not only reconfigures its initial profile in situ but also enables on-demand regulation of the final configuration. These capabilities provide a foundation for the future development of modular continuum robots, enabling them to be adaptable to diverse environments, particularly in unstructured surroundings.

robotics,engineering, multidisciplinary,materials science, biomaterials
Ant3DBot: A Modular Self-reconfigurable Robot with Multiple Configurations

Sen Niu,Linqi Ye,Houde Liu,Bin Liang,Zongxiang Jin

DOI: https://doi.org/10.1007/978-3-031-13844-7_52

2022-01-01

Abstract:In the paper, a novel modular self-assembling and self-reconfiguring robot named Ant3DBot was proposed, which has many configurations. Ant3DBot consists of four semicircular iron spheroid shells, telescopic legs, and internal magnets that can rotate around the center. Ant3DBot can expand its shells and legs through a single motor, a synchronous belt and compressed springs, which results in two different docking states. Ant3DBot which has the height of 12 cm can traverse obstacles with the height of 8 cm, and pass through a 25 degrees slope in extending configuration. For many unstructured environments, the cooperation of multiple Ant3DBots can reach a target point with simple control. The simulations show the basic ability of a single module to overcome obstacles as well as the cooperative motion of multiple robots. The results demonstrate that the Ant3DBot system has excellent locomotion performance and versatility.
The Design of Multi-section Bionic Robot and the Development of Control System

Mingguan Ke,Richeng Chen,Naiwen Zhang,Yaxi Yang

DOI: https://doi.org/10.1109/aiac61660.2023.00072

2023-11-17

Abstract:Traditional reconnaissance and detection platforms are constrained by the comprehensive conditions, such as the obstacle crossing ability, the concealment and the body size, and their reconnaissance capabilities are limited, and there are problems such as single adaptability to the terrain environment and poor concealment, which cannot fully meet the needs of military reconnaissance, cave detection, and post-disaster rescue. Therefore, a multi-section bionic robot is proposed, its overall mechanical structure and control system are designed, and experimental tests are carried out under grass, gravel, sand, steps and other terrains, and the results show that the multi-section bionic robot can adapt to a variety of complex terrains and geomorphology and improve reconnaissance capabilities.

Environmental Science,Engineering
Hierarchically Reconfigurable Soft Robots with Reprogrammable Multimodal Actuation

Fuyi Fang,Wenbo Li,Xinyu Guo,Huyue Chen,Guang Meng,Wenming Zhang

DOI: https://doi.org/10.1002/adfm.202414279

IF: 19

2024-10-20

Advanced Functional Materials

Abstract:A new concept of hierarchically reconfigurable strategy and elastically‐guided multimodal actuation design principle for modular soft robots is reported in this work. With the delicate experiments and analysis, the performances of the modules are revealed. Subsequently, multiple types of robots are demonstrated, including a tube‐detecting robot, a planar omnidirectional crawling robot, and several soft manipulators. Reconfigurable soft robots exhibit superior flexibility and adaptability when coping with complex environments and variable tasks. However, conventional modular design strategy based on soft actuator modules with specific structure and actuation mode as the basic constructing element for reconfigurable soft robots always has limited reprogrammability or scalability. Here, a hierarchical reconfigurable strategy is reported that not only offers conventional module reconfiguration as the first level to build different robot prototypes, but also provides the elastically‐guided multimodal actuation (contraction, bend, and twist) as the second level which can be reprogrammed to construct different actuator modules. This strategy deepens the modularity to a higher dimensionality and provides more choices for robots to adjust various conformations and functions as needed, for example, a peristalsis robot, an omnidirectional crawling robot, and a soft manipulator can be easily constructed using the module‐level reconfiguration. Moreover, soft manipulators with various preprogrammed deformation trajectories based on the mode reconfiguration are proven to dramatically reduce the operation difficulty and cost in potential applications such as environment detection and human‐robot interaction. This work provides a hierarchical framework for reconfigurable soft robots and may open up a new way for modular design.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Decoding modular reconfigurable robots: A survey on mechanisms and design

Guanqi Liang,Di Wu,Yuxiao Tu,Tin Lun Lam

DOI: https://doi.org/10.1177/02783649241283847

2024-10-16

The International Journal of Robotics Research

Abstract:The International Journal of Robotics Research, Ahead of Print. The intrinsic modularity and reconfigurability of modular reconfigurable robot (MRR) systems confer advantages such as versatility, fault tolerance, and economic efficacy, thereby showcasing considerable potential across diverse applications. The continuous evolution of the technology landscape and the emergence of diverse conceptual designs have generated multiple MRR categories, each described by its respective morphology or capability characteristics, leading to some ambiguity in the taxonomy. This paper conducts a comprehensive survey covering a wide range of mechanism and design aspects of MRR systems, spanning from 1985 to 2023. It introduces an innovative, unified conceptual framework for understanding MRR hardware, which encompasses three pivotal elements: connectors, actuators, and homogeneity. Through the utilization of this trilateral framework, this paper systematically interprets and classifies MRR systems over the years, aiming to provide a structured taxonomy perspective and enhance understanding of MRR. It explains the fundamental attributes characterizing MRR systems and their compositional aspects, providing insights into their design, technology, functionality, and categorization. Augmented by the proposed trilateral framework, this paper also elaborates on the trajectory of evolution, prevailing trends, principal challenges, and potential prospects within the field of MRR.

robotics
The Design and Manufacture of Bionic Emotional Robot Head

DENG Hai-Bo,CHEN Gong,WANG Zhi-Liang

DOI: https://doi.org/10.3969/j.issn.1002-6673.2008.06.019

2008-01-01

Abstract:Based on bionics, referring to the layout and movement of the muscle of human faces, using mechanical engineering 、 mechanical three-dimensional emulator、 SCM control、 artistic sculpt and artificial intelligence technology, we designed and made a bionic emotional robot head, which can express its own emotion. It supports a effective and intuitionistic platform for the research of artificial intelligence 、 artificial mentality and the modeling of artificial emotion.
RESEARCH ON ROBOTIC BIONICS

张秀丽,郑浩峻,陈恳,段广洪

DOI: https://doi.org/10.3321/j.issn:1002-0446.2002.02.019

2002-01-01

ROBOT

Abstract:The robotic bionics researches on robotics from the view of bionics. It is an important branch in the robotics field. This paper summarized the researching status and development direction from bionic structure, biomaterials, bionic control algorithm, functional bionics and social bionics all over the world.

Design of modular reconfigurable bionic robot

Modular Industrial Robot Based on Joint Modular

Configuration of Industrial Robots Based on Reconfigurable Modularization and Its Statics Analysis

Structure design of service robot based on modular design method

Module-Based Method for Design and Analysis of Reconfigurable Parallel Robots

Design, Fabrication, and Control Algorithm of Self-Reconfigurable Modular Intelligent Vehicles

Modular Reconfigurable Robotic System

Structure Design of Multi-joint Bionic Robot Based on Solidworks

The Kinematics Analysis of A Novel Self-Reconfigurable Modular Robot Based on Screw Theory

Bionic Multi-Legged Robots with Flexible Bodies: Design, Motion, and Control

Design and Control of a Robotic System with Legs, Wheels, and a Reconfigurable Arm

Modular Design Method for Control of Reconfigurable Machine Tools

Review of Modular Self-Reconfigurable Robotic Systems

Design of a bionic snake-like robot

In Situ Reconfiguration of Assembling Pattern for Modular Continuum Robots

Ant3DBot: A Modular Self-reconfigurable Robot with Multiple Configurations

The Design of Multi-section Bionic Robot and the Development of Control System

Hierarchically Reconfigurable Soft Robots with Reprogrammable Multimodal Actuation

Decoding modular reconfigurable robots: A survey on mechanisms and design

The Design and Manufacture of Bionic Emotional Robot Head

RESEARCH ON ROBOTIC BIONICS