Research Progress on Chemical Modification of Poly(Aryl Ether Ketone)s

XU Yi,HAN Gaoliang,CHANG Guanjun,HU Hongju,XU Zhen,MIAO Lubin,ZHANG Lin

DOI: https://doi.org/10.3969/j.issn.1672-2191.2011.02.006

2011-01-01

Abstract:The physical and chemical properties of poly(aryl ether ketone)s(PAEKs) are introduced.The recent research focus of PAEKs by hyperbranched modification,chemical modification,and sulfonated modification is reviewed.

What problem does this paper attempt to address?

Synthesis and Functionality of Substituted Polyacetylenes

jianzhao liu,jacky w y lam,ben zhong tang

DOI: https://doi.org/10.1002/9783527629787.ch1

2010-01-01

Abstract:Polyacetylene (PA) is the archetypal conjugated polymer. The seminal discovery of the metallic conductivity of its doped form has triggered a huge surge of interest in conductive polymers and has spawned an exciting area of research on synthetic metals. As a result of rapid advances in the area, we are now on the threshold of a ‘‘plastic-electronics era’’ that previously could only be imagined in science fiction. Structurally, PA is a linear polyene chain [−(HC=CH)n−]. The existence of two hydrogen atoms in its repeat unit offers ample opportunity to decorate the backbone with pendants: replacement of hydrogen in each repeat unit by one or two substituents yields mono(1) and disubstituted PAs (2), respectively (Scheme 1.1). The pendant and backbone can interact with each other: for example, the former perturbs the electronic conjugation of the latter, while the latter influences the molecular alignment of the former. Proper structural design may tune the backbone–pendant interplay into harmony and synergy, generating new substituted PAs with novel functionalities. While PA is electrically conductive, introduction of such pendant as mesogen, chromophore, photosensitive double bond, or naturally occurring building block may endow it with such new functional properties as electro-optic activity, photonic responsiveness, and biologic compatibility. Considerable efforts have been devoted to the synthesis of the substituted PAs and study of their properties [1–9]. Attachment of polar groups to the polyene backbone enables the integration of functional pendants into the PA chain through various functional-group transformations, which was, however, a difficult task at the early stage of PA chemistry. Difficulties were ascribed to the poisoning of the metathesis catalysts by the functional groups [10, 11]. The later discovery of the functionality-tolerant organorhodium catalysts was a thrilling advance in the
Synthesis and Electrochemical Properties of Electroactive Hyperbranched Poly(Aryl Ether Ketone) Bearing Oligoaniline Segments

Fangfei Li,Mingjuan Zhou,Jiayu Wang,Xincai Liu,Ce Wang,Danming Chao

DOI: https://doi.org/10.1016/j.synthmet.2015.03.019

IF: 4

2015-01-01

Synthetic Metals

Abstract:A novel electroactive hyperbranched poly(aryl ether ketone) (EHPAEK) with oligoaniline segments has been prepared by K2CO3-mediated nucleophilic aromatic polycondensation. The structure of EHPAEK was confirmed by Fourier-transform infrared spectra (FTIR), nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC). Its thermal stability and spectroscopic properties were also studied using thermogravimetric analysis (TGA) and UV-vis spectroscopy. Due to the oligoaniline segment, EHPAEK was found to be electroactive, which was explored by cyclic voltammetry in 0.5 M H2SO4. The electrochromism of EHPAEK thin film was examined using EHPAEK/ITO as the working electrode coupled with UV-vis spectroscopy, which exhibited good electrochromic properties with high contrast value, moderate switching times, acceptable coloration efficiency. Furthermore, the Tafel plots analysis and electrochemical impedance spectroscopy was applied to study the anticorrosion of the EHPAEK coatings on the cold rolled steel (CRS) in 3.5 wt% NaCl electrolyte solution. The enhanced corrosion protection ability of the EHPAEK coatings was ascribed to the redox catalytic capabilities of the oligoaniline segment. (C) 2015 Elsevier B.V. All rights reserved.
SYNTHESIS AND PROPERTIES OF POLY(ARYL ETHER KETONE)S CONTAINING PENDANT ARYL ESTER GROUPS

Song Cheng,Yu Wenwen,Zhong Ming,Zhu Zhifang,Yi Zhiqun,Song Caisheng

DOI: https://doi.org/10.3724/sp.j.1105.2011.09485

2011-01-01

Acta Polymerica Sinica

Abstract:A series of novel poly(aryl ether ketone) s containing pendant aryl ester groups(PEK-COO-Ar) were prepared from poly(aryl ether ketone)s containing pendant carboxyl acid groups(PEK-A) and phenol in the presence of 1,1,2,2-tetrachloroethane and by using p-toluenesulfonic acid as a catalyst.The PEK-A was synthesized from trimellitic anhydride chloride(TMAc),terephthaloyl chloride(TPC) and 1,4-bis(4-phenoxybenzoyl)benzene(p-EKKE) by low temperature solution poly-condensation.By changing the molar ratio of TMAc and TPC a series of PEK-A polymers were prepared.The PEK-COO-Ars were characterized by Fourier transform infrared spectroscopy(FTIR),wide-angle X-ray diffraction(WAXD),thermal gravimetric analysis(TGA) and differential scanning calorimetry(DSC).The results showed that the glass transition temperature(Tg) of the PEK-COO-Ar was in the range of 195 ～ 219℃ and the decomposition temperature(Td) at 5% weight loss was from 416℃ to 447℃ and the melting temperature(Tm) was between 325℃ and 345℃.The Tg of the PEK-COO-Ar increased by increasing the mole ratio of aryl ester groups in the polymer,while the Td deceased.The polymers were readily soluble in N-methly-2-pyrrodine,chloroacetic acid and concentrated sulfuric acid at room temperature.They were swelling or soluble in the strong polar aprotic solvent such as N,N-dimethylformamide(DMF),N,N-dimethylacetamide(DMAc) and dimethyl sulfoxide(DMSO) by heating.The polymers converted to amorphous when the molar ratio of TPC to TMAc was less than 1.The polymers had good mechanical properties after being isothermally crystallization.The tensile strength,elongation at break and elastic modulus of S2’(TPC/TMAc = 60/40) and S3’(TPC/TMAc = 50/50) were 112.1 MPa,27%,2.9 GPa and 130.3 MPa,24.2%,2.4 GPa,respectively.
A New Strategy of Post-Polymerization Modification to Prepare Functionalized Poly(disubstituted Acetylenes)

Yuan Gao,Xiao Wang,Li Tong,Anjun Qin,Jing Zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1039/c3py01164j

IF: 4.6

2013-01-01

Polymer Chemistry

Abstract:Two disubstituted acetylenes bearing a vinyl group at one end (M1 and M2) were synthesized and polymerized by WCl6-Ph4Sn catalyst. The expected poly(disubstituted acetylenes) PDSAs (P1 and P2) were obtained in high yields. Both P1 and P2 have reactive vinyl groups on their side chains, thus they were used as precursors to be subsequently modified with a mercapto compound through the thiol-ene click reaction to produce the novel PDSAs (P1S and P2S) in good yield. The chemical structures of the polymers were carefully characterized by standard spectroscopic methods such as gel permeation chromatography (GPC), NMR, NMR and FTIR techniques, and satisfactory data were collected. The post-polymerization modification of P1 took a long reaction time (3 days) to convert P1 to P1S because the ene-functionality at the end of side chain of P1 links to a saturated alkyl segment. By using an activated ene-functionality (alpha,beta-unsaturated vinyl), the modification of P2 to P2S took only 1 day under mild conditions. Moreover, the activated end-ene group allowed the post-polymerization modification of P2 by Michael addition, which was confirmed using butylamine as the representative amine compound and the characterization data indicated the validity of the expected P2N. The thermal analysis results indicated that the modified polymers were highly stable thermally with a decomposition temperature over at least 240 degrees C, except for P2N, which showed lower stability due to unstable imine groups. Meanwhile, it was found that the modified polymers P1S and P2S were fluorescent and showed similar emission efficiency to their precursors P1 and P2. These results indicated that the thiol-ene click reaction and Michael addition reaction are accessible routes for post-polymerization modification to generate novel functional PDSAs.
Synthesis of Functional Poly(disubstituted Acetylene)s Through the Post-Polymerization Modification Route.

Yuan Gao,Xiao Wang,Jing Zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1002/tcr.201402064

2015-01-01

ChemInform

Abstract:We report the recent progress in the preparation of functional poly(disubstituted acetylene)s (PDSAs) through post-polymerization modification routes. The metathesis polymerization of disubstituted acetylene monomers activated by Mo/W-Sn complex catalysts, which do not tolerate highly polar functionalities, was assumed to be a key step in the polymer synthetic procedures. We and other groups have explored several approaches to prepare PDSAs with latent reactive functionalities, which are inactive to Mo/W-Sn complex catalysts but can be used as highly reactive sites for post-polymerization modification. Click chemistry, Michael-type addition reactions, the use of activated esters and other strategies are demonstrated by recently published examples. These works indicate that post-polymerization modification is an efficient route to the synthesis of various functional PDSAs.
Progress in Research on Surface Functionalization of Polyethylene

Fu Zhisheng,Zhu Liang,Zhu Jingxing,Pan Huijie,Shen Hongfu,Wang Hua,Jiang Senyang,Fan Zhiqiang

DOI: https://doi.org/10.3969/j.issn.1005-3360.2010.05.015

2010-01-01

Abstract:The research progress of surface functionalization of polyethylene was reviewed.The conventional and modern techniques including flame treatment,initiator graft,chemical treatment,graft polymerization and corona,photochemistry,halogenation,plasma and high energy ray treatment for the surface modification of different physical forms and chemical compositions of polyethylene were introduced.The development trend of surface functionalization techniques of polyethylene was prospected.
SYNTHESIS AND PROPERIES OF POLY(AROMATIC ETHER KETONE KETONE ETHER KETONE KETONE)CONTAINING CARBOXYLIC ESTER SIDE GROUPS

Song Cheng,Li Jing,Yu Wenwen,Zhong Ming,Zhu Zhifang,Song Caisheng

DOI: https://doi.org/10.3724/sp.j.1105.2010.09191

2010-01-01

Acta Polymerica Sinica

Abstract:Five novel poly(aryl ether ketone ketone ether ketone ketone) with carboxylic ester side groups(PEKKEKK-E)s were synthesized from poly(aryl ether ketone ketone ether ketone ketone) having pendent carboxyl groups(PEKKEKK-A) and alcohols,in the presence of 1,2-dichoroethane and thionyl chloride as acylchlorination reagent,pyridine as a catalyst.While PEKKEKK-A was prepared from trimellitic anhydride chloride(TMAC) and 1,4-bis(4-phenoxybenzoyl) benzene(p-EKKE) by low temperature solution polycondensation.PEKKEKK-Es were characterized by FTIR,1H-NMR,WAXD,TGA,DSC,the solubility and mechanical properties of the polymers were investigated.Results show that the glass transition of the polymers is in the range of 175℃ to 237℃.The structure of the polymers is amorphous as expected.The esterified polymers have better solubility than the corresponding polymer.Flexible and colorless films were easily obtained by solution casting taking DMAc as solvent.It shows that the polymers have good mechanical properties.Tensile strength,elongation at break and Young's module of polymers are in the range of 74.7 MPa to 85.4 MPa,6.34% to 15.43%,and 1.74 GPa to 3.08 GPa,respectively.
Sequential Modification of ADMET Polyketone Via Oxime Chemistry and Electrophilic Alkoxyetherification

Fu-Rong Zeng,Qi-Lin Zhu,Zi-Long Li

DOI: https://doi.org/10.1071/ch18120

2018-01-01

Australian Journal of Chemistry

Abstract:Post-polymerization modification is a facile and efficient method for the generation of diverse functional polymers. Herein, polymer-based molecular arrays were obtained by using sequential modification. First, periodic polyketone P0 was synthesized via acyclic diene metathesis (ADMET) polymerization of α,ω-diene M0. Oxime chemistry was employed in the functionalization of the ketone moieties of P0 using three commercially available alkoxyamine hydrochlorides. Finally, electrophilic alkoxyetherification, a four-component reaction, was employed in the modification of alkene groups on polymer main chains using N-bromosuccinimide (NBS), tetrahydrofuran, and fluorinated carboxylic acid. Complete conversion of reactive sites was observed in both steps, and the two modification reactions exhibited excellent compatibility. The thermal properties of the polymers as thermal stability, and glass transition and melting behaviours were investigated by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC).
A Review of the Preparation, Modification, and Applications of Polyetheretherketone Coating

Yufei Chen,Hongjun Ni,Jae-Jun Park,Shuaishuai Lv

DOI: https://doi.org/10.3390/coatings14111451

IF: 3.236

2024-11-18

Coatings

Abstract:The progress of research on the preparation of polyetheretherketone (PEEK) coatings is systematically described with emphasis on the three coating preparation methods of thermal spraying, electrophoretic deposition, and melt extrusion coating, and the advantages and disadvantages of these methods and their main applications are reviewed. At the same time, research into the modification of PEEK coatings is also introduced, including modification using inorganic materials and chemical modification. Finally, the application of PEEK coatings is introduced, and its future development directions are prospected.

materials science, multidisciplinary,physics, applied, coatings & films
Crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties: Synthesis, characterization and properties

Wanwan Li,Haoyu Tang,Xaiofang Chen,Xinghe Fan,Zhihao Shen,Qifeng Zhou

DOI: https://doi.org/10.1016/j.polymer.2008.08.001

IF: 4.6

2008-01-01

Polymer

Abstract:A novel phenylethynyl-contained bisphenol monomer, (2,5-dihydroxyphenyl)(4-(2-phenylethynyl)phenyl)methanone (PEBP), has been synthesized and characterized. The resultant monomer was copolymerized with hydroquinone and 4,4′-difluorobenzophenone by means of an aromatic nucleophilic substitution reaction to provide a series of crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties (PE-PAEKs). The solubility of PE-PAEKs tended to be improved with the increase in PEBP content. Wide-angle X-ray diffraction (WAXD) results showed that introduction of bulky pendant groups into molecular chains led to decrease in crystallinity. PE-PAEKs were successfully cured upon heating. Dynamic mechanical analysis (DMA) results indicated that the glass-transition temperature (Tg) of the cured PE-PAEKs was increased. Thermogravimetric analysis (TGA) results implied that the thermal stability of the cured PE-PAEKs was excellent.
Surface modification of polyetheretherketone by grafting amino groups to improve its hydrophilicity and cytocompatibility

Jiafan Bai,Rui Ding,Yingying Wang,Taijun Chen,Qizhen Xu,Bo Feng,Ke Duan,Wei Zhi,Jie Weng,Jianxin Wang

DOI: https://doi.org/10.1088/2053-1591/ab3782

IF: 2.025

2019-11-01

Materials Research Express

Abstract:Although special engineering plastics polyether ether ketone (PEEK) have many excellent properties, its hydrophobicity and biological inertia limit its application in the field of implant materials. In this study, amino modification of PEEK was conducted to endow it with good hydrophilicity and bioactivity. PEEK was sulfonated with concentrated sulfuric acid, and reacted with sulfoxide chloride to obtain aromatic sulfonyl chloride. Finally, amino (–NH2) was introduced onto the surface of PEEK by acylation reaction between acyl chloride group and ethylenediamine (EDA) to improve its hydrophilicity and cell compatibility. The PEEKs before and after modification were characterized by FTIR, XPS and WCA. The cell compatibility was evaluated by human umbilical vein endothelial cells (HUVEC). The results showed that –NH had been successfully introduced onto the surface of PEEK, and the hydrophilicity of the aminated PEEK was significantly improved. Compared with the PEEK before amino modification, the aminated PEEK significantly promoted adhesion and spread of cells, indicating good cell compatibility. This study breaks through the limitations of traditional wet chemical methods and provides a new way for further modification of PEEK.

materials science, multidisciplinary
Progress in the Polymerization of 1-Chloro-2-phenylacetylene Derivatives

Fu-lin Yang,Jie Zhang,Jing-zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.11777/j.issn1000-3304.2021.21066

2021-01-01

Acta Polymerica Sinica

Abstract:Poly(disubstituted acetylenes) (PDSAs) have shown excellent performance in gas permeability, polarized light emission, and fluorescent elastomers, and therefore have attracted great attention from researchers in relevant fields. Among a variety of PDSAs, the development history of poly(1-chloro-2-phenylacetylene)s is an ideal epitome of the progress of polyacetylenes. In this mini review, from traditional polymerization catalysts of late transition metal complexes to newly developed Pd-based catalyst systems, from nonpolar substituents to various polar functional groups on monomers, from inner apolar solvents to common polar solvents as polymerization media, different aspects of the polymerization of 1-chloro-1-alkynes, especially 1-chloro-2-phenylacetylenes are retrospected with a series of examples. Meanwhile, this review lays another clue, or the efforts on pursuing for PDSAs possessing ultrahigh permeability and good separation property of gases such as H-2, N-2, O-2, CO2 and CH4, an utmost important application of polymer materials. The greatly enhanced tolerance to polar groups of the Pd-based catalyst systems, in contrast with the traditional catalyst complexes, allows to introduce polar functionalities and active sites into the structure of PDSAs, thereby offering the chances to tackle the problem of the very low selectivity to different gas pairs. The realistic demands for gas collection and separation prompt the development of novel catalyst systems and synthetic strategies to PDSAs with intrinsic microporous structures. Moreover, due to the unique conjugated polyene main-chain and regioregular configuration, PDSAs are conceived as one of the promising candidates for the construction of PIMs. Finally, perspectives and suggestions of the functional design and synthetic efforts are presented.
Novel Carboxylation Method for Polyetheretherketone (PEEK) Surface Modification Using Friedel–Crafts Acylation

Xinghui Lyu,Ryuhei Kanda,Susumu Tsuda,Yoshiya Hashimoto,Takamasa Fujii,Kosuke Kashiwagi

DOI: https://doi.org/10.3390/ijms242115651

IF: 5.6

2023-10-27

International Journal of Molecular Sciences

Abstract:Recently, polyetheretherketone (PEEK) has shown promising dental applications. Surface treatment is essential for dental applications owing to its poor surface energy and wettability; however, no consensus on an effective treatment method has been achieved. In this study, we attempted to carboxylate PEEK sample surfaces via Friedel–Crafts acylation using succinic anhydride and AlBr3. The possibility of further chemical modifications using carboxyl groups was examined. The samples were subjected to dehydration–condensation reactions with 1H,1H-pentadecafluorooctylamine and N,N'-dicyclohexylcarbodiimide. Furthermore, the sample's surface properties at each reaction stage were evaluated. An absorption band in the 3300–3500 cm−1 wavenumber region was observed. Additionally, peak suggestive of COOH was observed in the sample spectra. Secondary modification diminished the absorption band in 3300–3500 cm−1 and a clear F1s signal was observed. Thus, Friedel–Crafts acylation with succinic anhydride produced carboxyl groups on the PEEK sample surfaces. Further chemical modification of the carboxyl groups by dehydration-condensation reactions is also possible. Thus, a series of reactions can be employed to impart desired chemical structures to PEEK surfaces.

biochemistry & molecular biology,chemistry, multidisciplinary
A Novel Post-Polymerization Modification Route to Functional Poly(Disubstituted Acetylenes) Through Phenol-yne Click Reaction

Wenjie Wang,Yang Shi,Xiao Wang,Anjun Qin,Jing Zhi Sun,Ben Zhong Tang

DOI: https://doi.org/10.1039/c7py00109f

IF: 4.6

2017-01-01

Polymer Chemistry

Abstract:We report a new synthetic strategy to derive functional poly(disubstituted acetylenes) (PDSAs) through "phenol-yne click reaction". The phenol-containing PDSA was prepared by the polymerization of the triisopropylsilane (TIPS)-protected 4-((4- fluorophenyl) ethynyl) phenol monomer and by a subsequent deprotection step. Then, different functional groups (e. g., ester and amide) were grafted onto the PDSA side chains via the highly efficient "phenol-yne click reaction". Thepost-polymerization modification was carried out under mild conditions (at 40 degrees C, in common solvent) under an air atmosphere for a short time (4 h).The structures of the products were well characterized by GPC, NMR, and FTIR techniques and satisfactory data were collected. The data indicated that the phenol groups on the precursor PDSA were highly active to react with activated acetylenic compounds bearing functional groups intolerable to direct polymerization. This is the first example of the preparation of phenol-containing PDSA and the use of it as a precursor to prepare functional PDSAs. Besides the activated ester, thiol-ene click reaction, Michael addition reaction and Cu(I) catalysed alkyne-azide click reaction, we added a new tool in the tool-box for the synthesis of functional polymers.
POLYARYLENEETHERKETONES OBTAINING WITH REACTION OF NUCLEOPHILIC SUBSTITUTION

Ali Kh. Salamov,Abdulakh K. Mikitaev,Aues A. Beev,Julietti A. Beeva,Mukhamed Kh. Ligidov,Sergey I. Pakhomov

DOI: https://doi.org/10.6060/tcct.20165907.5389

2018-07-17

IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENIY KHIMIYA KHIMICHESKAYA TEKHNOLOGIYA

Abstract:The article deals with the study of influence of the synthesis conditions on the molecular weight of polyaryleneetherketones (PAEK), received with nucleophilic substitution reaction of activated aryl halide. The synthesis of PAEK with the nucleophilic substitution reaction carried out as partially hydrolyzed homopolycondensation of phenolates and aromatic dihalides containing a carbonyl group in the molecule and derivatives of polycondensation of aromatic bisphenols with activated aromatic dihalides, and aromatic nitro compounds. The nucleophilic substitution of halogen in aryldihalogens proceeds through formation of Meisenheimer complex, where the negative charge of the electron-electron ring stabilizes the group. The high efficiency of the synthesis of PAEK with nucleophilic substitution reaction is mainly determined with several factors, the main of which are: 1) the structure of the starting monomers; 2) the nature of the solvent; 3) the nature of phenolate; 4) side reactions. For these materials it was revealed that the ratio of nucleophilic and electrophilic reagents has pronounced effect on the molecular weight of the obtained polymer, without affecting the poly dispersion. PAEK synthesis processes are optimized by controlling the replacement of some of the monomers, the temperature and concentration of reactants change. It was shown that the polyarylene ether ketones and copolymers have a high thermal heat resistance, mechanical properties. They show considerable heat resistance in air, capable of forming a transparent film and melts. Thus, data of literature review show that the nucleophilic substitution reaction is promising for PAEK synthesis of various chemical structures and produces polymers having valuable properties.

English Else
Poly(aryl ether ketone)s with bromomethyl groups: Synthesis and quaternary amination

Wenjia Ma,Chengji Zhao,Haidan Lin,Gang Zhang,Hui Na

DOI: https://doi.org/10.1002/app.33483

IF: 3

2011-01-01

Journal of Applied Polymer Science

Abstract:A series of bromomethylated poly(arylene ether ketone)s (PAEKs) with different contents of bromine tethered to the benzyl groups were successfully synthesized and characterized in this work. For this purpose, poly(arylene ether ketone) with 3,3',5,5'-tetramethyl-4,4'-dihydroxybipheny moiety (PAEK-TM) was prepared by the aromatic nucleophilic polycondensation, and then the PAEK-TM has benzylic methyl groups that were converted to bromomethyl groups by a radical reaction using N-bromosuccinimide. Then, the bromomethylbenzyl groups in the membrane was converted to quaternary ammonium moieties in TMPAEK-NOH. H-1-NMR measurements were used to characterize and confirm the structures of the resulting PAEK-x-BrTM and TMPAEK-NBr derivatives (x refers to the molar percentage of bromine introduced per repeating units). TGA analysis showed that PAEK-x-BrTM exhibited a very low-decomposition temperature at about 200 degrees C corresponding to the C-Br bond cleavage. The hydroxide conductivity of TMPAEK-NOH membrane was 8 mS cm(-1) at room temperature, while the water uptake of TMPAEK-NOH membrane was 22.3% at 20 degrees C and 32.6% at 60 degrees C. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 120: 3477-3483, 2011
Synthesis of Novel Soluble Poly (aryl ether ketone)s Containing Dihydrochalcone Moieties

Zirou Zhang,Liang Xu,Haiyan Feng,Gengming Xiong,Yikai Yu,Tao Wang,Ying Zhang,Lu Zhang

2015-01-01

JOURNAL OF POLYMER MATERIALS

Abstract:A new intermediate containing dihydrochalcone moiety, i.e., bis(dihydrochalcone) diphenyl ether (BHCDPE), was first synthesized by the Friedel-Crafts alkylation reaction of chalcone and diphenyl ether (DPE). Subsequently, a series of novel poly(aryl ether ketone) (PAEK) polymers were prepared by further Friedel-Crafts polycondensation of BHCDPE and DPE with isophthaloyl dichloride (IPC). It was observed that BHCDPE exhibited strorkg reactivity during Friedel-Crafts polycondensation, i.e., one non-conjugated gamma-carbonyl would not decrease the Friedel-Crafts acylation's reactivity of corresponding benzene rings, such that the dihydrochalcone moiety could be successfully incorporated into the backbone of PAEK to form novel PAEKs with dihydrochalcone moiety. The synthesis route was a continuous procedure and displayed inexpensive and commercially available of the raw materials, mild reactive conditions, as well as high yields due to the absence of complicated process of intermediate treatment. The polymers' structures were characterized by FT-IR, H-1-NMR and XRD analysis. Moreover, obtained polymers maintained good thermal properties, and incorporation of a dihydrochalcone moiety significantly improved polymer solubility in organic solvents, which was advantageous for further functionalization, processing and interactions with other substances. Thus, the designed synthesis route was appropriate to obtain novel soluble PAEKs containing dihydrochalcone moieties, which were expected as new potential candidates for more useful materials in various fields.
Phenol-Yne Click Polymerization: an Efficient Technique to Facilely Access Regio- and Stereoregular Poly(Vinylene Ether Ketone)S

Yang Shi,Tianwen Bai,Wei Bai,Zhe Wang,Ming Chen,Bicheng Yao,Jing Zhi Sun,Anjun Qin,Jun Ling,Ben Zhong Tang

DOI: https://doi.org/10.1002/chem.201702966

2017-01-01

Chemistry - A European Journal

Abstract:Alkyne-based click polymerizations have been well-established. However, in order to expand the family to synthesize polymers with new structures and novel properties, new types of click polymerizations are highly demanded. In this study, for the first time, we established a new efficient and powerful phenol-yne click polymerization. The activated diynes and diphenols could be facilely polymerized in the presence of the Lewis base catalyst of 4-dimethylaminopyridine (DMAP) under mild reaction conditions. Regio-and stereoregular poly(vinylene ether ketone)s (PVEKs) with high molecular weights (up to 35200) were obtained in excellent yields (up to 99.0 %). The reaction mechanism was well explained under the assistance of density functional theory (DFT) calculation. Furthermore, since the vinyl ether sequence acts as a stable but acid-liable linkage, the polymers could be decomposed under acid conditions, rendering them applicable in biomedical and environmental fields.
Synthesis and characterization of poly(aryl ether ketone)s containing silican

ZH Gao,XH Fan,XF Chen,QF Zhou

DOI: https://doi.org/10.3321/j.issn:0251-0790.2005.08.041

2005-01-01

Abstract:The introduction of silane into the polymer backbone improves the solubility of the polymer without having a great influence on the thermal stability of the polymer. Therefore, the changes on the main-chain of PAEK were made to gain novel materials containing silane and all the polymers were prepared by low temperature polycondensation method. The glass transition temperatures were evaluated by differential scanning calorimetry(DSC) and the thermal properties were tested by thermal gravimetric analysis(TGA) which showed no mass loss below 350 degrees C in both air and nitrogen atmospheres. All the polymers were completely soluble in organic solvents such as N, N-dimethylformamide, N, N-dimethylacetamide, N-methyl-2-pyrrolidone, dimethyl sulphoxide (DMSO), and concentrated sulfonated acid (H2SO4). All these PAEK materials containing silane, which show excellent properties, were expected to be applied in composition or function material system.
Synthesis and Application of Polyethylene-Based Functionalized Hyperbranched Polymers

Yongsheng Chen,Li Wang,Haojie Yu,Yongjun Zhao,Rui Sun,Guanghui Jing,Jin Huang,Hamad Khalid,Nasir M. Abbasi,Muhammad Akram

DOI: https://doi.org/10.1016/j.progpolymsci.2015.01.004

IF: 31.281

2015-01-01

Progress in Polymer Science

Abstract:Polyethylene is one of the largest volume commodity polymers, with excellent physical and chemical properties. Polyethylene-based functionalized hyperbranched polymers are newly developed materials with unique structures and properties. Their architecturally complex structure – topology, composition and functionality – may be designed for different applications, with reduction of complexity and cost in preparation. This review focuses on the synthesis strategies and applications of polyethylene-based functionalized hyperbranched polymers.

Research Progress on Chemical Modification of Poly(Aryl Ether Ketone)s

Synthesis and Functionality of Substituted Polyacetylenes

Synthesis and Electrochemical Properties of Electroactive Hyperbranched Poly(Aryl Ether Ketone) Bearing Oligoaniline Segments

SYNTHESIS AND PROPERTIES OF POLY(ARYL ETHER KETONE)S CONTAINING PENDANT ARYL ESTER GROUPS

A New Strategy of Post-Polymerization Modification to Prepare Functionalized Poly(disubstituted Acetylenes)

Synthesis of Functional Poly(disubstituted Acetylene)s Through the Post-Polymerization Modification Route.

Progress in Research on Surface Functionalization of Polyethylene

SYNTHESIS AND PROPERIES OF POLY(AROMATIC ETHER KETONE KETONE ETHER KETONE KETONE)CONTAINING CARBOXYLIC ESTER SIDE GROUPS

Sequential Modification of ADMET Polyketone Via Oxime Chemistry and Electrophilic Alkoxyetherification

A Review of the Preparation, Modification, and Applications of Polyetheretherketone Coating

Crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties: Synthesis, characterization and properties

Surface modification of polyetheretherketone by grafting amino groups to improve its hydrophilicity and cytocompatibility

Progress in the Polymerization of 1-Chloro-2-phenylacetylene Derivatives

Novel Carboxylation Method for Polyetheretherketone (PEEK) Surface Modification Using Friedel–Crafts Acylation

A Novel Post-Polymerization Modification Route to Functional Poly(Disubstituted Acetylenes) Through Phenol-yne Click Reaction

POLYARYLENEETHERKETONES OBTAINING WITH REACTION OF NUCLEOPHILIC SUBSTITUTION

Poly(aryl ether ketone)s with bromomethyl groups: Synthesis and quaternary amination

Synthesis of Novel Soluble Poly (aryl ether ketone)s Containing Dihydrochalcone Moieties

Phenol-Yne Click Polymerization: an Efficient Technique to Facilely Access Regio- and Stereoregular Poly(Vinylene Ether Ketone)S

Synthesis and characterization of poly(aryl ether ketone)s containing silican

Synthesis and Application of Polyethylene-Based Functionalized Hyperbranched Polymers