Abstract:The rapid development of highway traffic has gradually deteriorated the acoustic environment along the line. Sonic crystal theory provides new ideas for traffic acoustic barrier. However, the lack of practical numerical models and field test verifications has restricted the promotion and application of sonic crystal acoustic barriers (SCABs). In this study, a field test was conducted to study the noise reduction performance of SCAB. The SCAB exhibits excellent wave attenuation in the band gap, when compared with concrete acoustic barriers (CABs) along highways, the noise reduction performance in the band gap is improved by 0.5-2.1 dB(A), especially at the local peak in the highway noise spectrum. However, from the perspective of total insertion loss, CAB performs better than SCAB in all distances in the protected area. Next, the 3D FEM model is established based on the highway site and validated by the measured results. Compared with the commonly used 2D model, the 3D FEM model is more practical for considering the top diffraction and ground reflection, which influence the noise reduction performance a lot and need to be considered. To improve the noise reduction performance of SCAB, three types of optimization measures are explored. The gradient combination of scatterers can effectively improve the noise reduction effect in the low-frequency band gap, especially the high- to low-gradient layout. Besides, not only the porous sound-absorbing material but also the microperforated plates can improve the noise reduction effect, especially outside the band gap. The larger perforation rates and smaller apertures of microperforated plate are preferred in SCAB. This work provides field test support and promotes the application of SCABs in traffic noise control.

Research and Application of Sound Barrier of Re-cycled Tyre Composite Type for Expressway

Research and application of combined noise reduction method by using noise reducing pavement and noise barrier

Control of Noise at the Entrance or Exit of Parking Garages

Study on sound barrier based on microperforated panel structure with top absorbing cylinder

Optimization and Experiment on the Top Form of Urban Elevated Road Noise Barrier

A Study on Technique of Barrier for Railway Traffic Noise

Current Status and Prospects of Application of Sound Barrier for High-Speed Railway in China

Study on Barrier Properties with Different Top Shapes by Using Boundary Element Method

Design of Sound Insulation Wall in City Expressway

Comparative Study of Noise Reduction Effects of Different Sound Absorption Barriers

A novel composite sound absorber with recycled rubber particles

Design of Embedded Sound-barrier of Urban Rail Transit and Simulated Research on Its Acoustic Performance

Prediction and Analysis of Noise Impact and Noise Reduction Scheme Effect for Complex Road Types

Noise Reduction for Sound Barrier in Rail Traffic

An innovative approach for the development of sound absorbing material using industrial wastes

Study on Noise Reduction Performance of Sound Barrier with Acoustic Diffusers

Study on Noise Reduction Mechanism and Experiment of Rubber Powder Modified Asphalt

Noise Performance of Drainage Asphalt Pavement

Modeling, analysis, and validation of an active T-shaped noise barrier

Development of Louvered Noise Barrier with Changeable Sound Insulation from Waste Tire Rubber and Investigation of Acoustic Properties

Numerical modeling and field test of sonic crystal acoustic barriers