Abstract:Existing desiccant cooling systems reduce the temperature of process air either by adopting evaporative coolers or incorporating vapor compression systems. While the former is restricted by inaccurate control, the latter still consumes certain quantity of electric power. To solve this problem, a thermally driven air conditioning system, which combines the technologies of rotary desiccant dehumidification and regenerative evaporative cooling, has been proposed and investigated. In addition to dehumidification, the system is capable of producing chilled water, thereby realizing separate temperature and humidity control without increasing electrical load. To find out the characteristics of produced chilled water and evaluate the feasibility and energy saving potential of this novel system, a mathematical model has been developed. Case studies have been conducted under Air conditioning and Refrigeration Institute (ARI) summer, ARI humid and Shanghai summer conditions. It is found that the system can achieve a thermal COP higher than 1.0 and an electric COP about 8.0. The temperature of chilled water produced by the system is around 14-20 degrees C. This chilled water can be used with capillary tube mats for radiant cooling. It is suggested that the system can also be designed as a standalone chilled water plant. As a desiccant dehumidification-based chilled water producing technology, this would expand desiccant cooling to a boarder niche application. The effects of chilled water flow rate, air distribution ratio, inlet air conditions and regeneration temperature have been analyzed in detail. Reachable handling regions, which will be helpful to system design and optimization, have been obtained. (C) 2010 Elsevier Ltd. All rights reserved.

Design and performance prediction of a novel zeolite–water adsorption air conditioner

Performance of a Diesel Locomotive Waste-Heat-Powered Adsorption Air Conditioning System

Simulation of Adsorption Air-Conditioner Used in Internal-Combustion Locomotive Driver-Cabin

Practical experiments on an adsorption air conditioner powered by exhausted heat from a diesel locomotive

EXPERIMENTS AND CHARACTERISTIC ANALYSIS ON ADSORPTION AIR-CONDITIONER USED IN INTERNAL-COMBUSTION LOCOMOTIVE DRIVER-CABIN

Analysis of a Hybrid System of Adiabatic Absorption two-stage Liquid Desiccant and CO2 Transcritical Cycles

Experimental Investigations on Adsorption Air-Conditioner Used in Internal-Combustion Locomotive Driver-Cabin

Characteristic Analysis on Locomotive Driver-Cabin Adsorption Air-Conditioning System

Adsorption Cold Storage System with Zeolite–water Working Pair Used for Locomotive Air Conditioning

Experimental Study on Locomotive Driver Cabin Adsorption Air Conditioning Prototype Machine

Operational Aspects of Adsorption Air-Conditioner Used in Diesel Locomotive

Study Of Generator Exhaust Heat Powered Solid Adsorption Refrigeration - Indirect Evaporative Cooling Traffic Air Conditioning System

Study of a novel silica gel–water adsorption chiller. Part I. Design and performance prediction

Design and Performance Prediction of a New Generation Adsorption Chiller Using Composite Adsorbent

Design and performance prediction of coupling adsorbing and absorption system

Design and Performance Prediction of a Novel Double Heat Pipes Type Adsorption Chiller for Fishing Boats

Design and experimental study on a hybrid adsorption refrigeration system using desiccant coated heat exchangers for efficient energy utilization

Experimental and Simulation Analysis of Low Temperature Heat Sources Driven Adsorption Air Conditioning, Refrigeration, Integrating Ammonia, and Organic Expanding Power Generation

A New Air-Conditioning System of Liquid Desiccant and Evaporation Cooling

DESIGN AND PERFORMANCE TEST OF THE SILICA-GEL AND WATER ADSORPTION SYSTEM

Study on a Novel Thermally Driven Air Conditioning System with Desiccant Dehumidification and Regenerative Evaporative Cooling