Abstract:<p>With the increase of DC transmission voltage and capacity, large dc fault current becomes an important issue due to the bottleneck of the capacity of the DC breaker. In order to solve the problem, we have proposed a novel hybrid type DC superconducting fault current limiter (DC SFCL) in our previous papers. Based on a series of previous researches, some improvements are made to design the hybrid type DC SFCL for application in a MMC system in this paper. The target is to limit short circuit current and avoid converter valves blocked when the DC short circuit occurs. In consideration of cost and stability, combined with the transient characteristics and parameter matching of the DC SFCL, an effective optimization design method consisting of electromagnetic theory and intelligent algorithm is proposed, which can obviously promote the utilization efficiency and stability of YBCO coated conductors. According to the optimization design method, a design scheme of the DC SFCL is put forward. Combined with three operation states of the DC SFCL (normal state, current limiting state I and current limiting state II), a corresponding finite element model is established to simulate and evaluate the performance of superconducting coil in the DC SFCL, which further reveal the AC loss characteristics of superconducting coil during current limiting process.</p>

Improvement of Current Limiting Capability of HTSC Elements in Hybrid Type SFCL

Improved Fault Current Limiting Characteristics of Three-Phase Transformer Type SFCL With Non-Separated Secondary Windings Due to Unsymmetrical Ground Fault Types

Hybrid Multifunctional Saturated-core Fault Current Limiter

Simulation and Analysis for New Bridge-Type High Temperature Superconducting Fault Current Limiter

A Novel Auto-transformer Coupling Bridge-type SSFCL and Its Topology Improvement

Optimized design and electromagnetic analysis of a hybrid type DC SFCL in MMC system

Ratios Of Current Limiting And Its Distribution In A Dc Resistive Superconducting Fault Current Limiter

Development and Test of 10.5 Kv/1.5 Ka HTS Fault Current Limiter

Design and Evaluation of a Novel Non-Inductive Unit for a High Temperature Superconducting Fault Current Limiter (SFCL) with Bias Magnetic Field

Effect of Peak Current Limiting in Series-Connection SFCL With Two Magnetically Coupled Circuits Using E-I Core

Performance Analysis on a Flux Coupling Superconducting Fault Current Limiter (SFCL) Considering the Power Grid Integration Based on MATLAB/SIMULINK

Study of Superconducting Fault Current Limiters for MMC-MTDC with HVDC CBs

Electromagnetic Thermal Analysis on Variable Resistive-type Superconducting Fault Current Limiter

Test of Controllable Impedance Type Fault Current Limiter Based on Air-core Superconducting Transformer

Current Limit Transfer and Recovery Characteristics of Resistive-Inductive Type Superconducting Fault Current Limiters

Numerical Simulation on Current Limiting and Recovery Characteristics of Variable Impedance Superconducting Current Limiter

Study On Inductive High-T-C Superconducting Fault Current Limiters

A Novel Six-Leg Three-Phase Fault Current Limiter

Over-Critical Current Analysis for Helical SFCL Coil

Study Of The Three-Phase Saturated Transformer Coupling New Bridge-Type Ssfcl

Application Simulation of a Resistive Type Superconducting Fault Current Limiter (SFCL) in a Transmission and Wind Power System