Design of Air Mobile Monitoring System

Lei BAO,Cong-zhi ZHAI,Jia-yan YU,Wei HUANG,Hong XIANG,Da-nian LI

DOI: https://doi.org/10.3969/j.issn.1673-9655.2008.03.030

2008-01-01

Abstract:The design of environmental air mobile monitoring system is demonstrated based on the requirements of mobile monitoring system.The vehicle,the equipments of vehicle,monitoring system and assistant fixing are the key points for the design.

What problem does this paper attempt to address?

Design of a Commercial Vehicle Monitoring System Based on Multiple Sensors

Shaodong Zhou,Jiancheng Chen,Zaiyang Liu,Fengjun Yan,Hui Zhang

DOI: https://doi.org/10.1109/icca51439.2020.9264470

2020-01-01

Abstract:The paper describes a design of commercial vehicle monitoring system (CVSM) which can help to promote transportation safety and improve traffic efficiency. To meet the demand of practical application, we analyze functional requirements and set the general objective and basic routes of system design. The structure design consists of three main parts, namely, on-board terminal design, mobile application development and abnormal driving behavior detection. The real-time performance, reliability, and stability of the system are verified through experiments.
[Development of a Wireless Multiple Physiological Parameters Monitoring System].

Jian Xu,Jian-gang Lu

DOI: https://doi.org/10.3969/j.issn.1671-7104.2005.06.005

2005-01-01

Abstract:This paper presents a scheme of a wireless multiple physiological parameters monitoring system, and gives a detail description on the hardware and software realization. This system utilizes wireless communication technology, embedded micro internet working technology and medical service technology in the remote monitoring system.
Research on Small Mobile Water Quality Online Monitoring Device.

Shangchao Deng,Jiang Yang,Yu Wu,Jiangang Lu

DOI: https://doi.org/10.1109/icca.2013.6565133

2013-01-01

Abstract:In order to achieve daily monitoring of the quality of the water source and track the pollution emergency, a low-cost and mobile online monitoring device has been designed. This device uses Cortex-A8 as core processor, acquires the position information by GPS, and communicates with the remote control center through 3G wireless transmission. This paper describes the hardware and the software of the device, and focuses on the extraction of the color feature of the water quality image and its long-distance transmission, and the tracking of the pollution source. In practice, this system can be well operated in the tested river.
Development of Online Safety Monitoring Information Management System for Bridges in Hangzhou City

MA Jun,LIU Shan,WU Tie-Jun

DOI: https://doi.org/10.3969/j.issn.0451-0712.2006.12.025

2006-01-01

Abstract:The online safety monitoring information management system for bridges in Hangzhou City supports functions such as long-term and long-range online monitoring,realtime safety evaluation,maintenance management and incidents handling.This system consists of signal collection section,transmission network section,safety evaluation section and management support section.The design me-(thod and key technology provide reference for designing large online safety monitoring network for urban) bridges,which are rich in monitoring contents,wide in monitoring sites and various in types of sensors.
Low-cost Urban Air Quality Monitoring with Mosaic

Gaoyang Guan,Yuan Chen,Kai Guo,Yi Gao,Wei Dong

DOI: https://doi.org/10.1109/infcomw.2016.7562155

2016-01-01

Abstract:Mosaic is a low-cost sensing system for city scale air quality monitoring. Mosaic is able to monitor city scale air quality with low costs by deploying customized sensors on moving vehicles. Objectives of this demo are to show how our customized low-cost sensors work and present the three-layer air quality monitoring system. Details about the node design can be found in [1] which will be presented in INFOCOM technical sessions.
Development of an integrated wireless sensor network micro-environmental monitoring system.

Xianghui Cao,Jiming Chen,Yan Zhang,Youxian Sun

DOI: https://doi.org/10.1016/j.isatra.2008.02.001

IF: 7.3

2008-01-01

ISA Transactions

Abstract:Wireless Sensor Network (WSN) is increasingly popular in the field of micro-environmental monitoring due to its promising capability. However, most systems using WSN for environmental monitoring reported in the literature are developed for specific applications without functions for exploiting user’s data processing methods. In this paper, a new system is designed in detail to perform micro-environmental monitoring taking the advantages of the WSN. The application-oriented hardware working style is designed, and the system platform for data acquisition, validation, processing and visualization is systematically presented. Several strategies are proposed to guarantee the system capability in terms of extracting useful information, visualizing events to their authentic time are also described. Moreover, a web-based surveillance subsystem is presented for remote control and monitoring. In addition, the system is extensible for engineers to carry their own data analysis algorithms. Experimental results are to show the path reliability and real-time characteristics, and to display the feasibility and applicability of the developed system into practical deployment.
A Design of Indoor Air-Quality Monitoring System

Chao Wang,Hongli Liu,Jiawen Ji,Yangshuang Wu

DOI: https://doi.org/10.1088/1742-6596/2366/1/012011

2022-11-12

Journal of Physics: Conference Series

Abstract:With the deepening of people's understanding of the harm of air pollution, indoor air quality is getting more and more attention. This paper designs an indoor air quality monitoring system based on sensor technology and Internet of things technology, the system function includes air quality detection, real-time data display, server transfer, remote display throught Wechat mini programe and others, the system can detect six important environmental parameters and allows users to view the data on mobile phone. Based on the data collected, this paper also designs an air quality evaluation algorithm.
Design and Implementation of Vehicle Environment Monitoring System Based on Wireless Sensor Network

Gang-song Dong,C. Li,Yumei Lu

DOI: https://doi.org/10.1109/ICESIT53460.2021.9696556

2021-11-22

Abstract:With the rapid development of Chinese economy, Our country has been in the forefront of automobile producing countries. As the number of cars continues to rise, people pay more and more attention to the interior environment, the interior air quality requirements are also constantly improving, the interior environment problems are widely concerned. This paper designs a car environment monitoring system with wireless sensor network as serial port. The system is composed of single chip microcomputer, wireless sensor network technology and sensor module. The gas sensor is used to detect the concentration of formaldehyde, PM2.5, carbon monoxide and carbon dioxide, which have great influence on human health. The parameters collected by various sensors in the car are transmitted to the main control chip STM32F103RCT6 through the wireless sensor network module. STM32F103RCT6 analyzes and processes the data to achieve the goal of monitoring the air quality in the car. When the concentration of harmful gas in the car exceeds the threshold value, the voice broadcast can timely remind people to deal with the environment in the car, reduce the harmful gas in the car, so as to achieve the purpose of improving the driving environment, to meet people's health needs for the air environment in the car.

Environmental Science,Engineering
Mobile Real-Time Data Monitoring System for Nuclear Accident Emergency

WANG Wei,ZHANG Hong-jian,ZHOU Hong-liang,ZHENG Gou-dong,HU Chi-ying

DOI: https://doi.org/10.3969/j.issn.0258-0934.2006.01.023

2006-01-01

Abstract:A mobile real-time data monitoring system is designed for nuclear accident emergency,accomplished real-time data acquisition and transmission.For its special application,the system realized the real-time data acquisition of multi-serial device,GPS orientation and route record of the emergency monitoring vehicle,wireless data communications based on CDMA 1X network,database,etc.It is confirmed,by many times practical test,that such system satisfies the requirements of nuclear emergency monitoring.
The monitored control design of the central air-conditioning system

Chen Xi,Chang Jin-Zhao,Liu JunFeng

DOI: https://doi.org/10.3969/j.issn.1008-0570.2007.16.099

2007-01-01

Abstract:With the rapid development of computer technology,the monitored control design of the central air-conditioning system is becoming the core of the design for building automation system.The hardware of this monitored control system adopts SIEMENS Em-bedded Controllers including Modular Building Controller,Modular Equipment Controller,and so on.The software adopts APOGEE In-sight of SIEMENS.The monitored control system controls the room temperature and humidity of building and other parameters of air-conditioning in real time.
Design of air quality monitoring system based on light scattering sensor

YU Tong,XU Mei-de,YU Zi-han,ZHANG Tian-qing

DOI: https://doi.org/10.1088/1755-1315/647/1/012196

2021-01-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract The current air quality detector mainly detects the PM2.5, temperature and humidity of the environment at a single point, and the official website data is also a large range of regional data. The traditional cable transmission and wiring is complex, limited by the environment and high cost. In this paper, a data service air quality detection system based on light scattering sensor is proposed, which can detect PM2.5, temperature and humidity, and upload data to the Internet of things platform for real-time analysis and historical data statistics. It can also upload data to the Internet of things platform for real-time analysis and historical data statistics. The system collects three kinds of sensor modules to monitor indoor air environment in real time. Monitoring data is sent to mobile terminal equipment or PC terminal through WiFi. Its historical data can be viewed and called for data statistics through mobile phones. The system is stable and convenient to use. The paper also studies the detection characteristics and improvement methods of light scattering sensor.
Design and Realization of a Rural Land Monitoring System Based on Mobile GIS

Guanding Yu

2010-01-01

Abstract:Aimed at the requirement of strict land management in China and the disadvantages of existing land monitoring method in rural areas,based on mobile GIS and OGR Simple Features Library,integrated with the technologies of serial communication,GPS signal processing,Windows Mobile API programming and data model,a Rural Land Monitoring System running in PDA environment was designed and established in the paper,in which processing of GPS signal,designing of Mobile GIS data model,quick acquiring of geometric and property information of illegal used land,taking photographs and linking with the relevant graphic were realized.
Development of the Mobile Single-vehicle Pressure-testing System Based on Wireless Communication

张纯和,许力,吕俊,王培良

DOI: https://doi.org/10.3969/j.issn.1008-7842.2002.06.007

2002-01-01

Abstract:The features of the system design,functions,system control and result output of mobile single-vehicle pressure-testing system are introduced.This system is composed of a data processing center and several mobile pressure-testing elements,and data transmitting among each element is based on wireless communication.
Design of Environmental Monitoring System Based on Wifi

Yang Jieyu,Xia Ruoan

DOI: https://doi.org/10.1109/ICCWAMTIP56608.2022.10016486

2022-12-16

Abstract:With the improvement of China's national strength and the rapid development of economy, people have higher and higher requirements for environmental quality. In order to solve the problems of low integration and high energy consumption of the current environmental monitoring system, a multi-sensor integrated environmental monitoring system for remote management is designed. The system selects 51 series chips as the main microcontroller of the system, and sensor module, threshold selection module, liquid crystal display module, acousto-optic alarm module and WIFI communication module as the external equipment of the microcontroller to complete the acquisition, storage, display, analysis and transmission of environmental parameters, namely temperature, humidity and dust concentration data.After many tests, the system can work stably for a long time, and can accurately obtain real-time environmental data. At the same time, it is simple to operate, clear to display, functional integration, low cost, and has great practical value.

Environmental Science,Engineering
Design and Implementation of Wireless Environment Monitoring System Based on STM32

Qu Xilong,Liu Shengzong,Fu Sha,He Hong,Hu Ying,Xiao Leyi

DOI: https://doi.org/10.1155/2021/6070664

2021-10-28

Scientific Programming

Abstract:This paper first designed the overall scheme of a wireless-based intelligent environment monitoring system; this system is comprised of the following four parts: server part, client part, slave computer part, and master computer part. The master computer is equipped with a wireless transmission module and an LCD module. Slave computers are equipped with temperature-humidity sensing modules and wireless transmission modules. The server side has two major interfaces: data display and server establishment. An Android phone as the client can realize the communication between the mobile APP and server through network communication to obtain environmental data in real time. The hardware part of the system consists of wireless transmission module, temperature and humidity module, smoke module, lighting module, flame module, and LCD module. The software implementation part mainly includes the design and implementation of serial communication, the design and implementation of wireless communication, the design and implementation of collection of data acquisition in each sensor module, and the design and implementation of network communication as well as the design and implementation of display unit. With the cooperation of these four parts, we can automatically sense and control the state of the environment to realize human-computer interaction.

computer science, software engineering
Design and on-field testing of wireless sensor network-based air quality monitoring system

Qasem Abu Al-Haija

DOI: https://doi.org/10.25077/jitce.3.02.54-59.2019

2019-09-30

JITCE (Journal of Information Technology and Computer Engineering)

Abstract:The wireless sensor networks (WSN) are increasingly implemented in air quality monitoring with real-time and high spatial-temporal resolution. In this context, current work aimed at designing and testing a cost- and energy-efficient WSN-based air quality monitoring system. The system was assembled principally by wireless sensors, solar cells, microcontroller and network communication. In addition, a new circuit for buck-boost converter was implemented for voltage and current regulations. On-field, testing the proposed air quality monitoring system outdoor and indoor showed efficient real-time readings for the concentrations of carbon dioxide (CO2) and total volatile organic compounds (TVOC). Furthermore, it provided data about ambient temperature, relative humidity and air pressure with good accuracy. In conclusion, our results suggest a reliable and scalable WSN-based system for monitoring ambient air quality.
Implementation of a long range-based monitoring system for environmental remote safety schemes

Mahmood Jalal Ahmad Alsammarraie,Adnan Hussein Ali,Aqeel A. Al-Hilali,Hind Q. Mohammad Monir,Mohannad Sameer Jabbar,Haitham Bashar Qasim

DOI: https://doi.org/10.11591/ijeecs.v32.i3.pp1462-1475

2023-12-01

Indonesian Journal of Electrical Engineering and Computer Science

Abstract:The effects of poor air quality on people are profound. Air pollution and health issues are linked to millions of deaths. The World Health Organization (WHO)and the environmental protection agency (EPA)have produced several regulations and guidelines to control and enhanceair quality. Several authors have recently suggested low-cost tools for instantly assessing air quality. the abundance of inexpensive ways to assess air quality and collect sensor data. The design and employment of remote safety monitoring for humidity, temperature, and carbon monoxide has been merged into a single tool in this work. The results findings can be observed on the actual measured instrument’s organic light-emitting diode (OLED)show and the liquid crystal display (LCD)remote monitoring system. This device uses ESP32 microcontroller with long range (LoRa)wireless communication technology.The DHT22 sensor is used to detect humidity and temperature, while the MQ-7 sensor is used to monitor carbon monoxide levels. Testing measurements are calibrated using instruments that meet industrial standards (AS8700A CO meter and 4,000 NV weather tracker) used in environmental station. If the abnormalities in the recorded parameters are detected, then alert will be triggered. This instrument can help patients and workers to check their surroundings and provide remote monitoring to health service providers.
Design and Application of Wireless Sensor Network Monitoring Software Based on LABVIEW

XueWen Yu

DOI: https://doi.org/10.3991/IJOE.V13I05.7047

2017-05-14

International Journal of Online Engineering (iJOE)

Abstract:Wireless multi-point real-time environmental monitoring system based on LabVIEW is composed of three parts: wireless environment information collection node, communication gateway, and host computer monitoring system. The purpose of this study is to explore the application of wireless monitoring technology in industry. Since that it is at the stage of research feasibility, various sensors used for the applications select the level limited to the ordinary teaching using sensor. AGV uses vehicle manipulator developed by Wuhan Depushi Technology Company and some sensors are simulated. The results of simple basic experiments showed that the wireless module can achieve point to multipoint communication. It is concluded that the monitoring interface can simultaneously process the data of a simulated pipeline terminal node with a simulated AGV data and make them work in a closed loop state.

Computer Science,Engineering,Environmental Science
Design of Remote Monitoring System for New Energy Vehicles Based on Data Acquisition and Transmission

Lijie Gao,Dapeng Yang

DOI: https://doi.org/10.1088/1742-6596/2074/1/012012

2021-11-01

Journal of Physics: Conference Series

Abstract:Abstract This paper designs a new remote monitoring system for new energy vehicles based on data acquisition and transmission, hoping to make up for the shortcomings of the existing system. The following article will start from the shortcomings of the existing system, then describe the performance of the new system, and finally describe the design scheme of the vehicle terminal of the system in detail. The performance of the new system will be even better, and it will have positive significance for the improvement of other remote monitoring devices.
Design of Building Environment Detection System for Architectures Based on Internet of Things

Dongfang Zhang,Hui Ji,Zhennan Li,Hui Ge

DOI: https://doi.org/10.1155/2022/5438305

2022-03-28

Abstract:In the process of urban building design, a new integrated system for monitoring the environment is developed and designed by using embedded development technology and sensor technology. The system uses a wireless sensor network environment monitoring system IoT platform with embedded internal processors. Analyze and design the system as a whole, including the construction of the basic platform of the system, the design of the internal plates and circuits of the system, the monitoring design of the input node, and the monthly design of the output interface calculation. Finally, a physical model is built, and data measurement and analysis are carried out under different conditions, and the evaluation and advantage analysis of the system's operating status are given. The system can carry out all-round, multilevel, and three-dimensional real-time monitoring of the construction site environment, including dust, PM2.5, temperature, humidity, wind speed, carbon dioxide, and other indicators in the construction site environment. In addition, the system can upload various monitoring data to the detection system through the internal network. The system has the functions of monitoring, alarming, recording, querying, and counting of the target monitoring station and can also be linked with the environmental control device. The construction site staff can conduct real-time supervision through the mobile terminal and computer terminal management platform. In addition, it can also meet the role of real-time remote monitoring and online guidance and regulation. It has reference value for the safety and management of the actual operation process of the project.

Design of Air Mobile Monitoring System

Design of a Commercial Vehicle Monitoring System Based on Multiple Sensors

[Development of a Wireless Multiple Physiological Parameters Monitoring System].

Research on Small Mobile Water Quality Online Monitoring Device.

Development of Online Safety Monitoring Information Management System for Bridges in Hangzhou City

Low-cost Urban Air Quality Monitoring with Mosaic

Development of an integrated wireless sensor network micro-environmental monitoring system.

A Design of Indoor Air-Quality Monitoring System

Design and Implementation of Vehicle Environment Monitoring System Based on Wireless Sensor Network

Mobile Real-Time Data Monitoring System for Nuclear Accident Emergency

The monitored control design of the central air-conditioning system

Design of air quality monitoring system based on light scattering sensor

Design and Realization of a Rural Land Monitoring System Based on Mobile GIS

Development of the Mobile Single-vehicle Pressure-testing System Based on Wireless Communication

Design of Environmental Monitoring System Based on Wifi

Design and Implementation of Wireless Environment Monitoring System Based on STM32

Design and on-field testing of wireless sensor network-based air quality monitoring system

Implementation of a long range-based monitoring system for environmental remote safety schemes

Design and Application of Wireless Sensor Network Monitoring Software Based on LABVIEW

Design of Remote Monitoring System for New Energy Vehicles Based on Data Acquisition and Transmission

Design of Building Environment Detection System for Architectures Based on Internet of Things