Abstract:A mathematical model was presented to predict the performance of a total heat exchanger with a vapour-permeable membrane core. The model considers combined heat and mass transfer as well as pressure drop in the core. The model provides analytical expressions for the heat and moisture transfer resistances through the membranes, both of which are operating condition dependent. Numerical calculations are carried out to investigate the effects of the membrane core geometry, the membrane physical property and the outdoor air state on the exchanger performance. The core geometry includes the membrane spacing (channel height) and thickness, the membrane property includes the membrane transport and adsorption parameters, and the outdoor air state includes the outdoor air temperature and humidity. The calculation results show that under equal fan power condition, as the channel height increases, the total heat transfer rate initially increases, after attaining to a maximum, turns to decrease, whereas the enthalpy effectiveness monotonously decreases. As the moisture diffusivity in membrane increases, the total heat transfer rate increases; as the membrane adsorption constant increases, the total heat transfer rate initially increases, after reaching a maximum, turns to decrease. Similar changes are observed for the enthalpy effectiveness. As the outdoor air temperature or humidity increases, the total heat transfer rate increases. For fixed outdoor temperature, as the outdoor humidity increases, the enthalpy effectiveness initially decreases to a minimum and then increases. The enthalpy effectiveness decreases with increasing outdoor temperature for low outdoor humidities but shows little change with the outdoor temperature for higher humidities.

Experimental Study on Efficiency of Membrane-based Enthalpy Exchanger

Experimental and Numerical Investigation of the Operating Performance of Air-to-air Membrane Enthalpy Exchangers

Membrane-based Enthalpy Exchanger: Material Considerations and Clarification of Moisture Resistance

Parametric Studies On Membrane-Based Total Heat Exchanger Performance

Heat and Moisture Transfer in Application Scale Parallel-Plates Enthalpy Exchangers with Novel Membrane Materials

Effect of Geometric Parameters on the Performance of a Membrane‐Based Enthalpy Exchanger

Investigation of Membrane-Based Total Heat Exchangers with Different Structures and Materials

Numerical Evaluation of the Effects of Asymmetric Membrane Heat Conductivity and Moisture Adsorption Hysteresis on the Performance of Air-to-air Membrane Enthalpy Exchanger

Experimental and Theoretical Study on Heat and Mass Transfer of Hollow Fiber Membrane Heat Exchanger

Performance of Heat and Mass Transfer Based on Hydrophilic/hydrophobic Composite Membrane

Effectiveness Correlations for Heat and Moisture Transfer Processes in an Enthalpy Exchanger with Membrane Cores

Numerical study of heat and mass transfer in an enthalpy exchanger with a hydrophobic-hydrophilic composite membrane core

A Study on Enthalpy Exchanger with Modified Functional Layers Based on Chloride

Heat and mass transfer in a cross-flow membrane-based enthalpy exchanger under naturally formed boundary conditions

Air-to-air enthalpy exchangers: Membrane modification, characterisation and performance assessment

Experimental Study of the EHD (Electrohydrodynamics)-Based Electric Field Intensified Heat Exchange of a Membrane Type Full Heat Exchanger

An experimental study of the influence of the temperature difference field uniformity on cross-flow heat exchanger performance

Effectiveness of Entransy Dissipation Metric and Entropy Generation Units in the Design of Fin-Tube Heat Exchangers

Heat and Mass Transfer in Plate-Fin Enthalpy Exchangers with Different Plate and Fin Materials

Recent Research and Development of Membrane-based Enthalpy Heat Exchanger for Independent Fresh Air Ventilator

Experimental Investigation on Ventilation Heat Exchanger