Abstract:Distributed optical fiber sensing techniques have gradually played a prominent role in nondestructive structural health monitoring in the past decade due to their distinctive high durability, large data transmission bandwidth and inherent immunity to electric or electromagnetic interference. Brillouin opticaltime domain reflectometry called BOTDR, as a newly developed distributed optical fiber sensing technique, is capable of measuring the strain rising along whole sensing optical fiber. However, its measuring linearity, the precision and the applicability are uncertain yet for different types of sensing optical fibers; thus the calibration must be carried out before used. Using a calibration system for distributed optical fiber strain sensors, designed and made by authors, this paper investigated the linearity, the precision and the applicability of the nylon-jacketed optical fibers, whose strain was measured by BOTDR and strain gauges. The sensing optical fibers together with some strain gauges were all stuck to the surface of a steel cantilever with uniform strength, and then the cantilever was loaded step by step. Also, the theoretical calculation was carried out for reference. The measuring results of the sensing fibers showed a good linearity, and the correlation coefficients of it, based on the references values from strain gauges and theoretical calculation, were both more than 0.99. The relative errors attributed to both reference values can meet the needs of engineering application. And finally the conclusion can be made that the nylon jacketed optical fiber sensors have enough measure linearity, precision and applicability for practical use, also this calibration method provides an efficient way to further case study.

Experimental Study of Fiber Fabry-Perot Dynamic Strain Detection System with Self-Calibration

Strain Measurement Technology and Precision Calibration Experiment Based on Flexible Sensing Fiber

A Strain Sensing System Based on the Novel Long-period Fiber Grating

Calibration test researches on distributed optical fiber strain sensors

A FBG Sensor System for Dynamic Strain Measurement Based on F-P Etalon and Music Algorithm

High Resolution Optical Fiber Sensor for Quasi-Static Strain Measurement by Strain-Temperature Discrimination

Optical fiber Fabry-Perot interferometer based embeddable strain sensor with 30 nano-strain resolution

Quasi-distributed frequency-modulated continuous-wave reflectometric optical fiber strain sensor

Miniature Optical Fiber Strain Sensor Based on Fabry-Perot Interferometer

Distributed Fiber-Optic Dynamic-Strain Sensor with Sub-Meter Spatial Resolution and Single-Shot Measurement

High Precision Temperature Insensitive Strain Sensor Based on Fiber-Optic Delay

Dual Fiber-Optic Fabry-Perot Interferometer Strain Sensor with Low-Cost Light-Emitting Diode Light Source

An Ultra-High-resolution Large-Dynamic-range Fiber Optic Static Strain Sensor Using Pound-Drever-Hall Technique

Time-domain Multiplexed High Resolution Fiber Optics Strain Sensor System Based on Temporal Response of Fiber Fabry-Perot Interferometers

A High Performance Distributed Optical Fiber Sensor Based on Φ-OTDR for Dynamic Strain Measurement

Study of a Fiber Optic Fabry-Perot Strain Sensor for Fuel Assembly Strain Detection

Ultrahigh resolution optical fiber strain sensor using dual Pound-Drever-Hall feedback loops.

High-Resolution and Large-Dynamic Range Fiber-Optic Sensors Based on Dual-Mode Direct Spectrum Interrogation Method

Improved Φ-OTDR Sensing System for High-Precision Dynamic Strain Measurement Based on Ultra-Weak Fiber Bragg Grating Array

A Dynamic Strain Sensor System Based on a Tunable Fiber Ring Laser

Strain sensor system based on a high finesse fiber Bragg grating Fabry-Perot cavity