Abstract:A comprehensive numerical and experimental investigation on micrometer-sized water droplet impact dynamics and evaporation on an unheated, flat, dry surface is conducted from the standpoint of spray-cooling technology. The axisymmetric time-dependent governing equations of continuity, momentum, energy, and species are solved. Surface tension, wall adhesion effect, gravitational body force, contact line dynamics, and evaporation are accounted for in the governing equations. The explicit volume of fluid (VOF) model with dynamic meshing and variable-time stepping in serial and parallel processors is used to capture the time-dependent liquid-gas interface motion throughout the computational domain. The numerical model includes temperature- and species-dependent thermodynamic and transport properties. The contact line dynamics and the evaporation rate are predicted using Blake's and Schrage's molecular kinetic models, respectively. An extensive grid independence study was conducted. Droplet impingement and evaporation data are acquired with a standard dispensing/imaging system and high-speed photography. The numerical results are compared with measurements reported in the literature for millimeter-size droplets and with current microdroplet experiments in terms of instantaneous droplet shape and temporal spread (R/D(0) or R/R(E)), flatness ratio (H/D(0)), and height (H/H(E)) profiles, as well as temporal volume (inverted A) profile. The Weber numbers (We) for impinging droplets vary from 1.4 to 35.2 at nearly constant Ohnesorge number (Oh) of approximately 0.025-0.029. Both numerical and experimental results show that there is air bubble entrapment due to impingement. Numerical results indicate that Blake's formulation provides better results than the static (SCA) and dynamic contact angle (DCA) approach in terms of temporal evolution of R/D(0) and H/D(0) (especially at the initial stages of spreading) and equilibrium flatness ratio (H(E)/D(0)). Blake's contact line dynamics is dependent on the wetting parameter (K(W)). Both numerical and experimental results suggest that at 4.5 < We < 11.0 the short-time dynamics of microdroplet impingement corresponds to a transition regime between two different spreading regimes (i.e., for We < or = 4.5, impingement is followed by spreading, then contact line pinning and then inertial oscillations, and for We > or = 11.0, impingement is followed by spreading, then recoiling, then contact line pinning and then inertial oscillations). Droplet evaporation can be satisfactorily modeled using the Schrage model, since it predicts both well-defined transient and quasi-steady evaporation stages. The model compares well with measurements in terms of flatness ratio (H/H(E)) before depinning occurs. Toroidal vortices are formed on the droplet surface in the gaseous phase due to buoyancy-induced Rayleigh-Taylor instability that enhances convection.

Droplet Ejection and the Induced Flowfield by Microthermal Bubble During Growth/Collapse Process

Growth/collapse and the Induced Flow Fields for Explosive Micro Dual Bubbles

Dynamics of Bubble Formation in Highly Viscous Liquid in Co-Flowing Microfluidic Device

Thermal Nonequilibrium and Mechanical Forces Induced Breakup and Droplet Formation of Superheated Liquid Jets under Depressurized Release

Bubble Dynamics for Explosive Microthermal Dual Bubbles

Growth and Collapse of a Vapour Bubble in a Microtube: the Role of Thermal Effects

Micro-droplet ejection based on controllable cavity collapse within confined interface

Dynamic behaviors of a laser-induced bubble and transition mechanism of collapse patterns in a tube

Numerical Study of Liquid Jet and Shock Wave Induced by Two-Bubble Collapse in Open Field

Study on the bubble breakup and internal flow characteristics in the pulsed jet ejector

Single and two-phase fluid droplet breakup in impulsively generated high-speed flow

Experimental and Numerical Investigations on Flash Evaporation of a Sessile Droplet under Reduced Pressure

Shock wave induced by the collapse of a bubble cluster with each bubble distributed randomly

On the physics of transient ejection from bubble bursting

Micrometer-sized water droplet impingement dynamics and evaporation on a flat dry surface

Mechanism of flash boiling bubble breakup based on rim-like structure

Research on Dynamic Process and Droplet Splash of Laser-Induced Cavitation Bubble Collapse within a Droplet

Numerical Analysis of Bubble Dynamics in the Diffuser of a Jet Pump under Variable Ambient Pressure

Experimental and Numerical Study on the Formation and Detachment of Bubbles at Orifices under the Impinging Jet Flow

Droplet Ejection by Pulsatile Airflow

The growth and collapse of a micro-bubble under pulse heating