Abstract:Cerium-based catalysts are very attractive for the catalytic abatement of nitrogen oxides (NOx) emitted from stationary sources. However, the main challenge is still achieving satisfactory catalytic activity in the low-temperature range and tolerance to SO2 poisoning. In the present work, two series of Mo-modified CeO2 catalysts were respectively obtained through a wet impregnation method (Mo-CeO2) and a co-precipitation method (MoCe-cp), and the roles of the Mo species were systematically investigated. Activity tests showed that the Mo-CeO2 catalyst displayed much higher NO conversion at low temperature and anti-SO2 ability than MoCe-cp. The optimal Mo-CeO2 catalyst displayed over 80% NO elimination efficiency even at 150 degrees C and remarkable SO2 resistance at 250 degrees C (nearly no activity loss after 40 h test). The characterization results indicated that the introduced Mo species were highly dispersed on the Mo-CeO2 catalyst surface, thereby providing more Bronsted acid sites and inhibiting the formation of stable adsorbed NOx species. These factors synergistically promote the selective catalytic reduction (SCR) reaction in accordance with the Eley-Rideal (E-R) reaction path on the Mo-CeO2 catalyst. Additionally, the molybdenum surface could protect CeO2 from SO2 poisoning; thus, the reducibility of the Mo-CeO2 catalyst declined slightly to an adequate level after sulfation. The results in this work indicate that surface modification with Mo species may be a simple method of developing highly efficient cerium-based SCR catalysts with superior SO2 durability. (C) 2021, Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Effect of CeO2 on Hydrodesulphurization over CoMo-Ox/Al2O3 Catalysts

Preparation, Characterization and Catalytic Activity Studies of CeO2–K Diesel Soot Oxidation Catalysts Loaded on Porous Al2O3 Substrate Using Water-Immiscible Solvent

Effects of MgO on Co-Mo/Al 2O 3-MgO catalyst performances in hydrodesulfurization

Effects of Different Methods of Introducing Mo on Denitration Performance and Anti-So2 Poisoning Performance of CeO2

Effect of cerium on Co/γ-Al2O3catalysts for Fischer-Tropsch synthesis

Enhanced Activity of CuCeO Catalysts for CO Oxidation: Influence of Cu2O and the Dispersion of Cu2O, CuO, and CeO2.

The Role of MgO in the Formation of Surface Active Phases of CoMo/Al2O3–MgO Catalysts for Hydrodesulfurization of Dibenzothiophene

Effect of Ce Modification on the Performance of CuLDH Catalyst for CO2 Hydrogenation to Methanol

Effect of CeO2 on oxidation of CO over Pd/Al2O3 catalyst

A STUDY ON THE EFFECT OF PREPARATION PARAMETERS ON THE CATALYTIC PERFORMANCE AND ACTIVE COMPONENTS OF A NEW TYPE HYDRODESULFURIZATION CATALYST

Effect of sulfiding conditions on the hydrodesulfurization performance of the ex-situ presulfided CoMoS/γ-Al2O3 catalysts

Redispersion Effects of Citric Acid on CoMo/γ-Al2O3 Hydrodesulfurization Catalysts

Preparation And Desulfurization Activity Of Nano-Ceo2/Gamma-Al2o3 Catalysts

Enhanced Activity And Stability Of Copper Oxide/Gamma-Alumina Catalyst In Catalytic Wet-Air Oxidation: Critical Roles Of Cerium Incorporation

Reverse Water–gas Shift Reaction over Co-Precipitated Co–CeO2 Catalysts: Effect of Co Content on Selectivity and Carbon Formation

Influence of Cerium Modification Methods on Catalytic Performance of Au/mordenite Catalysts in CO Oxidation

Effect of SiO2 addition on NH4HSO4 decomposition and SO2 poisoning over V2O5-MoO3/TiO2-CeO2 catalyst

Probing Different Effects of Surface MOy and Mn+ Species (M = Cu, Ni, Co, Fe) for Xmoy/ce0.9m0.1−xo2−δ Catalysts in CO Oxidation

Support Effects on Thiophene Hydrodesulfurization over Co-Mo-Ni/Al2O3 and Co-Mo-Ni/TiO2-Al2O3 Catalysts

Promotional role of ceria on cobaltosic oxide catalyst for low-temperature CO oxidation

Efficient CO Oxidation using Co3O4−CeO2 Nanoparticles Supported on Resin–Based Spherical Activated Carbon with Controllable Oxygen Species