Optimal Sequencing Control of Variable-speed Air-source Heat Pumps in Office Building
Zhaohui Liu,Zhenyu Li,Hongwei Tan,Wen Xu,Wenbo Feng,Biyi Yi
DOI: https://doi.org/10.3969/j.issn.0253-4339.2017.05.021
2017-01-01
Abstract:The heating, ventilation, and air conditioning ( HVAC) system accounts for a large portion of the total energy consumption of a building. When aiming to achieve energy efficiency, the vital factor is optimal operation of the chiller plants, which constitute a large percentage of the system energy consumption. In fact, chiller plants are often configured with multiple chillers, in order to meet the re-quirements for energy efficient operation of the HVAC systems of public buildings under partial loads. The chiller sequence control plays a significant role in satisfying the indoor load demand and facilitating energy-saving operation. In this paper, to improve the energy efficien-cy of the air-source heat pumps, an optimal sequencing control strategy is presented, taking an office building as an example. To develop this strategy, a variable-speed heat-pump model and the objective function for optimization of the heat-pump sequence control were first es-tablished, so as to determine the optimal solutions under partial building loads. Here, the variation of the actual capacity under different operation conditions was taken into consideration. In addition, the annual cooling and heating loads of the selected office building were an-alyzed using eQUEST software. It was found that loads greater than 70% of the peak loads occupy only 24% of the cooling time and 8%of the heating time. Finally, the optimal sequencing control strategy was contrasted with the traditional strategy based on the typical daily loads in the summer, winter, and transition seasons;the results indicate that the heat-pump energy consumptions are reduced by 14. 5%, 12. 3%, and 3. 3%, respectively. In addition, the energy consumption for the entire year was analyzed. The results show that the energy consumed by the heat pump is reduced by 14. 1% during the cooling season and 9. 0% during the heating season following adoption of the optimal sequencing control strategy. Thus, the optimal sequencing control strategy for the heat pump has a remarkable energy saving effect.