Abstract:The present article is to present our study of the oxidation tendency and likeliness of ferrous sulfide to cause explosive accidents in the oil tank with sulfur. As is known, the oxidation of ferrous sulfide, i.e. the corrosion products in an oil tank, may have a strong tendency to get oxidized. Therefore, this study focus has been put on the thermo-gravimetric analysis of the oxidation of ferrous sulfide samples, known as SDT-Q600 made by TA company in the USA within the range from 30 ℃ to 1 000 ℃. In our work, the oxidation process has been analyzed from different points of view, such as from that of physical adsorption, chemical adsorption and chemical reaction. The investigation on the effects of different particle sizes and heating rates on TG curve has also been done. The results show that the process of ferrous sulfide reacts with the oxygen can be described as that from constant weight to the weight increment, then turn to the rapid weight loss. In this process, the reaction can be said the one which goes violently after the physical and chemical adsorption with much heat released. The fire or explosive accident that may result in the oil tank with sulfur is by nature heat-cumulative. The particle size of ferrous sulfide and heating rate are likely to have significant influence on TG curve, which may turn noticeably to the lower temperature as the particle size decreases. And so are the initial oxidizing temperature and the final temperature. Thus, it shows that the danger of spontaneous combustion of ferrous sulfide may have thus increased with the decrease of particle size. And in turn the fire or explosive accidents in the oil tank are likely to take place promptly, too. Therefore, it can be found that the TG curve shifts to higher temperature and the oxidation speed decreases with the increase of heating rate actually imply that we should choose a suitable heating rate for our experimentation in order to keep its results in conformity with the actual situation. And so the conclusions here made can provide reference to fire prevention of or oil explosion in the oil tank.

Natural oxidation experiments of corrosion products in oil storage tank containing sulfur

Spontaneous Combustion Behavior of Sulfur Corrosion Products in Oil Tank

Study on the Oxidation Tendency of Ferrous Sulfide Based on Thermo-Gravimetric Analysis

The Thermogravimetric Analysis on the Spontaneous Combustion of Corrosion Products in Oil Tank Containing Sulfur

Experimental Investigation on Oxidation of Sulfurized Rust in Oil Tank

Oxidation experiment of sulfurized rusts in crude oil tank

Analysis on Oxidation Process of Sulfurized Rust in Oil Tank

Mechanism And Influencing Factors Of Spontaneous Combustion Of Oil Tank Containing Sulfur

Thermal Analysis Study on the Spontaneous Combustion of Oil Tank Contained Sulfur

Thermogrvimetric Experiment and Kinetic Analysis on the Oxidation of Ferrous Sulfide

Kinetic analysis for spontaneous combustion of sulfurized rust in oil tanks

Spontaneous combustion tendency of iron sulfide in natural environment

Mechanistic Study On Fes Oxidation

Mechanism and Effect Factors for Spontaneous Combustion of Iron Sulfide in Natural Environment

Study of Fixed Bed Reactor for Removing H_2S by Ferric Oxide

Experimental study on the effects of reservoir minerals on the occurrence of thermochemical sulphate reduction in nautre

Study on the Spontaneous Combustion of Oil Tank Induced by FeS Based on Activation Energy Index

Kinetics Mechanism of Spontaneous Combustion of Oil Tank Containing Sulfur Caused by Fe(OH)3

Study on Spontaneous Combustion Mechanism of Oil Containing Sulfur Based on Thermal Analysis

Oxidation and Effect Factors for Heat Gathering of Iron Sulfide

Non-negligible Corrosion Process in a Novel Sulfur-Based Energy Storage System