Abstract:Various magnetic carbon materials have been employed for nuclide adsorption, yet there exists a research gap concerning their application in electro-adsorption for nuclide removal. In this study, a magnetic carbon nanotube nanocomposite (Fe 3 O 4 /CNT) was successfully synthesized as an electrode material through the hydrothermal method, involving the modification of minute Fe 3 O 4 nanoparticles onto the surface of carbon nanotubes (CNT). Electrochemical assessments revealed that the Fe 3 O 4 /CNT nanocomposite exhibited a higher specific capacitance compared to Fe 3 O 4 and CNT individually. The HRTEM image reveals a heterojunction structure formed directly between Fe 3 O 4 and CNT, which facilitates electron transmission. The Fe 3 O 4 /CNT nanocomposite was utilized as an electrode in a capacitive deionization (CDI) device for U (VI)-contaminated wastewater purification. Experimental results demonstrated that the maximum U (VI) adsorption capacity of the Fe 3 O 4 /CNT electrode reached 287.53 mg/g at 298 K, and the adsorption process conformed to the Langmuir isotherm model. Kinetic analysis further indicated that the adsorption of U (VI) by Fe 3 O 4 /CNT followed a pseudo-second-order kinetic model. Additionally, the Fe 3 O 4 /CNT nanocomposite was transformed into a flowable electrode liquid and applied in a flow-electrode capacitive deionization (FCDI) system for U (VI) removal from aqueous solutions. Leveraging its superparamagnetic properties, the Fe 3 O 4 /CNT flow-electrode within the FCDI system could be rapidly recovered via a straightforward magnetic separation procedure. Notably, after nine consecutive runs of the FCDI device, the Fe 3 O 4 /CNT flow-electrode successfully concentrated a low-concentration U (VI) solution of 120 mg/L into a high-concentration solution of 1230 mg/L, thereby achieving the goal of water resource conservation and reduced storage requirements.

Regeneration of Carbon Nanotube and Nanofibre Composite Film Electrode for Electrical Removal of Cupric Ions

Electrosorption Behavior of Cations with Carbon Nanotubes and Carbon Nanofibres Composite Film Electrodes

Electrosorption of Anions with Carbon Nanotube and Nanofibre Composite Film Electrodes

Recyclable and Electrically Conducting Carbon Nanotube Composite Films.

Electrocatalysis aqueous phenol with carbon nanotubes networks as anodes: Electrodes passivation and regeneration and prevention

Cupric Hexacyanoferrate Nanoparticle Modified Carbon Ceramic Composite Electrodes

ELECTROSORPTION OF FeCl3 SOLUTIONS WITH CARBON NANOTUBES AND NANOFIBERS FILM ELECTRODES GROWN ON GRAPHITE SUBSTRATES

Eco-Friendly Carbon Nanotubes Reinforced with Sodium Alginate/Polyacrylic Acid for Enhanced Adsorption of Copper Ions: Kinetics, Isotherm, and Mechanism Adsorption Studies

Preparation of a manganese dioxide/carbon fiber electrode for electrosorptive removal of copper ions from water

Enhanced Rate Capability by Employing Carbon Nanotube-Loaded Electrospun Si/C Composite Nanofibers As Binder-Free Anodes

Fabrication and Capacitive Adsorption Performance of Carbon Nanotube Film Electrodes

Magnetic CNT-based electrode for efficient electro-adsorption of uranium

Enhanced Adsorption of Diclofenac Sodium on the Carbon Nanotubes-Polytetrafluorethylene Electrode and Subsequent Degradation by Electro-Peroxone Treatment.

Preparation and Application of Multi-Walled Carbon Nanotubes and Metal Cobalt Nanoparticles Composite Carbon Fiber Electrodes

Enhancing capacitive deionization performance of electrospun activated carbon nanofibers by coupling with carbon nanotubes

Carbon Nanoparticles As Recyclable Adsorbent for the Removal of Copper Ions

Magnetic loading of carbon nanotube/nano-Fe3O4 composite for electrochemical sensing

Cu Electro-Redox on the Surface of Single-Walled Carbon Nanotube Network

Electrochemical co-deposition of carbon nanotube/Ni composite layer

Removal of Cu2+ Ions from Aqueous Solutions by Carbon Nanotubes

Tube-covering-tube nanostructured polyaniline/carbon nanotube array composite electrode with high capacitance and superior rate performance as well as good cycling stability