Abstract:Tool wear and breakage is one of the biggest obstacles for developing the unattended CNC machining. Especially when cutting the difficult-to-machining materials, the tool wear will be more rapid and the tool breakage becomes more frequent, which makes an effective tool wear and breakage monitoring very urgent. In the paper, a physical model-based tool wear and breakage monitoring method is proposed. Firstly, a physical model of milling force with the influence of cutter runout and tool wear is established. The spindle box vibration and cutting torque of spindle drive system induced by milling force have been clarified theoretically. Then, through the measurements of milling force, spindle box vibration and driving current, a tool wear monitoring method by extracting the comprehensive feature from the seven-channel specific cutting force coefficients (SCFCs) has been presented. In the method, a multi-parameter decoupling identification procedure for the cutter runout, tooth wear loss and respective SCFCs has been clarified. The force homogenization effect of multi-tooth with tool wear is found. Moreover, an efficient tool breakage monitoring method is further put forward, which incorporates the amplitude ratios of multi-channel data to form an indicator for judging the occurrence of tool damage. The generation mechanism of the sudden distortion on signal waveform resulting from tool breakage is also explained. Finally, long-time milling experiments with multiple groups of machining parameters have been carried out on the general and heavy-cutting machine tools to verify the validity of the proposed method. The verification results indicate that the tool wear and breakage monitoring method can well estimate the cutting status of cutter. The study can provide a useful research basis for the potential industrial application of tool wear and breakage monitoring technology.

Tool condition monitoring in turning using fuzzy set theory

Tool wear monitoring with wavelet packet transform—fuzzy clustering method

Tool wear condition monitoring by combining spindle motor current signal analysis and machined surface image processing

A Method of On-Line Monitoring Tool Wear Based on Fuzzy Classification

Tool wear intelligent monitoring techniques in cutting: a review

Tool-wear monitoring in machine turning

A Flexible Similarity Based Algorithm for Tool Condition Monitoring

A reduced-order machine-learning-based method for fault recognition in Tool Condition Monitoring

Real-time tool condition monitoring method based on in situ temperature measurement and artificial neural network in turning

Tool Wear Condition Monitoring by Combining Variational Mode Decomposition and Ensemble Learning

Cutting Tool Wear Monitoring in CNC Machines Based in Spindle-Motor Stray Flux Signals

An approach based on current and sound signals for in-process tool wear monitoring

Unsupervised Tool Wear Monitoring in the Corner Milling of a Titanium Alloy Based on a Cutting Condition-Independent Method

In-situ tool wear condition monitoring during the end milling process based on dynamic mode and abnormal evaluation

Tool condition monitoring in micro milling of brittle materials

WEAR MONITORING IN TURNING OPERATIONS USING VIBRATION AND STRAIN MEASUREMENTS

Tool wear monitoring by machine learning techniques and singular spectrum analysis

Multi-condition identification in milling Ti-6Al-4V thin-walled parts based on sensor fusion

System for Tool-Wear Condition Monitoring in CNC Machines under Variations of Cutting Parameter Based on Fusion Stray Flux-Current Processing

Physical model-based tool wear and breakage monitoring in milling process

On-line tool wear monitoring under variable milling conditions based on a condition-adaptive hidden semi-Markov model (CAHSMM)